To remove [210 OUTRAGE] scuppers will I need to remove the hose and the nut from the inside then push the scuppers out from the inside?
I do not see any way to use a step wrench.
Give me ideas [for removing a scupper on a 210 OUTRAGE].
Search found 14 matches
- Sat Jun 24, 2023 8:32 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 210 OUTRAGE Remove Scupper
- Replies: 0
- Views: 2013
- Fri Jun 23, 2023 8:56 am
- Forum: PERFORMANCE
- Topic: 2007 210 Outrage VERADO 200 In-line Six-cylinder
- Replies: 2
- Views: 1877
2007 210 Outrage VERADO 200 In-line Six-cylinder
i have a 2007 210 Outrage with a fiberglass T-Top, powered by a Mercury 200 Verado six-cylinder and turning a REVOLUTION4 17-propeller. I am not really concerned with the [fastest boat speed]. At full-throttle the VERADO 200 accelerates to 5200-RPM. I was always told that the propeller [should be ch...
- Mon Aug 17, 2020 1:24 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 210 Outrage shower head
- Replies: 0
- Views: 2449
210 Outrage shower head
I recently purchased a 2007 210 Outrage. The owner before me had removed the shower head to the fresh water hose and put just a regular Male hose bib on the end. I have purchased a new shower head from Boston Whaler and I am not sure how it should attach. If anyone has this on their boat could you p...
- Thu Jul 06, 2017 8:52 pm
- Forum: MARKETPLACE
- Topic: 1994 24 Outrage Restored New Etec 150s New2018 Venture Trailer 40,995.00
- Replies: 4
- Views: 4980
Re: 1994 24 Outrage Restored New Etec 150s
Dude, keep the boat and forget the wedding!
- Thu Jun 22, 2017 8:21 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1997 Outrage 17 II Floor Replacement
- Replies: 4
- Views: 3098
Re: 1997 Outrage 17 II Floor Replacement
I am planing on doing it from the top. It is on the starboard side and just a little back from my access plate. I feel that after I get it filled and sealed with marine-Tex you will not even notice it. Of course I will see it every time I get in the boat.
I used #406 Colloidal Silica Filler.
I used #406 Colloidal Silica Filler.
- Thu Jun 22, 2017 9:31 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1997 Outrage 17 II Floor Replacement
- Replies: 4
- Views: 3098
Re: 1997 Outrage 17 II Floor Replacement
I just removed and replaced the entire floor. I am sure that in this spot it is because I did not get good adhesive between the floor skin and my new deck.
My plan is to inject epoxy probably with a filler and seal holes with marine tex.
My plan is to inject epoxy probably with a filler and seal holes with marine tex.
- Mon Jun 19, 2017 7:23 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1997 Outrage 17 II Floor Replacement
- Replies: 4
- Views: 3098
1997 Outrage 17 II Floor Replacement
I have removed and replaced the fuel tank and the floor in my Outrage. I have an area about 6" sq. that has some give. I am sure that it is because i did not get a good bond between the deck skin and the new floor underneath. I am thinking about drilling some 1/4" holes and injecting some ...
- Thu Dec 08, 2016 8:26 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Outrage 17 Fuel Tank Replacement
- Replies: 6
- Views: 4683
Re: Outrage 17 Fuel Tank Replacement
O.K., Thanks guys.
- Wed Dec 07, 2016 8:33 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Outrage 17 Fuel Tank Replacement
- Replies: 6
- Views: 4683
Re: Fuel Tank Replacement 17 Outrage
The deck [panel covering the fuel tank is] ready to re-install--just waiting on new fuel tank.
When putting down the deck, what should I use to seal it? 3M 5200 or 4200?
When putting down the deck, what should I use to seal it? 3M 5200 or 4200?
- Wed Nov 23, 2016 10:15 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Outrage 17 Fuel Tank Replacement
- Replies: 6
- Views: 4683
Re: Fuel Tank Replacement 17 Outrage
I am in the process of replacing the fuel tank and the rotten wood under my deck. I am going back with Coosa Composite Bluewater 26 board.
The console must be removed. Just mark your wires and take a lot of pictures.
Feel free to ask questions.
The console must be removed. Just mark your wires and take a lot of pictures.
Feel free to ask questions.
- Tue Sep 06, 2016 9:59 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1997 Outrage 17 Fuel Vent
- Replies: 6
- Views: 5333
Re: 1997 Outrage 17 fuel vent
Yup, on the 1998.
Where is [the fuel tank vent outlet] on the 1997 OUTRAGE 17?
Where is [the fuel tank vent outlet] on the 1997 OUTRAGE 17?
- Tue Sep 06, 2016 9:12 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1997 Outrage 17 Fuel Vent
- Replies: 6
- Views: 5333
1997 Outrage 17 Fuel Vent
Where is the fuel vent located on a 1997 Outrage 17?
I have seen a schematic of a 1998 Outrage 17 with it located on the port side of boat. [Does my 1997 OUTRAGE 17 boat fuel system] have a vent?
As my picture shows, you will see none there.
I have seen a schematic of a 1998 Outrage 17 with it located on the port side of boat. [Does my 1997 OUTRAGE 17 boat fuel system] have a vent?
As my picture shows, you will see none there.
- Sun Jul 24, 2016 10:19 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 25 Outrage – Drain for Fuel Tank Area
- Replies: 5
- Views: 4673
Re: 25 Outrage – Drain for Fuel Tank Area
This is the article I was looking for!
- Sun Jul 24, 2016 6:21 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Deck Repair
- Replies: 0
- Views: 2494
Deck Repair
I have seen a detailed topic on the removable and repair of a deck on here. Cant't find it now.
I have a 1997 17 Outrage that has a bad floor over fuel tank and I need to remove and replace plywood.
I have a 1997 17 Outrage that has a bad floor over fuel tank and I need to remove and replace plywood.