Search found 5 matches

by epj
Wed Apr 03, 2024 8:27 pm
Forum: PERFORMANCE
Topic: 1976 OUTRAGE 19 Re-power
Replies: 8
Views: 1273

Re: 1976 OUTRAGE 19 Re-power

Jim and Phil, thanks very much. If I make the move, I will go with the 140 Suzuki.
by epj
Sat Mar 30, 2024 4:51 pm
Forum: PERFORMANCE
Topic: 1976 OUTRAGE 19 Re-power
Replies: 8
Views: 1273

1976 OUTRAGE 19 Re-power

Q1: between a SUZUKI 140-HP and a SUZUKI 150-HP, [which is the best match for a 1976 OUTRAGE 19 boat]? BACKSTORY Since 2010 my 1976 OUTRAGE 19 has been powered by a 1999 Johnson 130-HP 25-inch-shaft engine mounted on a 4-inch CMC manual jack plate. The engine weighed 378-lbs. I may buy a SUZUKI 140-...
by epj
Sun May 17, 2020 9:21 am
Forum: PERFORMANCE
Topic: 1976 Outrage 19 Re-power
Replies: 7
Views: 4094

Re: 1976 Outrage 19 Re-power

Jim, thank you for your response. I admit that my expectations were a bit high. Also, unless I'm mistaken, the 1999 130 hp Johnson actually weighs about 30-35 lbs more than the 1999 150 motor. I'll have some data for you folks in a few hours. Again, thank you very much.
by epj
Sun May 17, 2020 12:04 am
Forum: PERFORMANCE
Topic: 1976 Outrage 19 Re-power
Replies: 7
Views: 4094

Re: 1976 19'4 Outrage 130-150 horsepower/prop/gear ration dilema

Thanks Acassidy. I agree with you. With the motor obviously too low, I tried a 15.25 x 15 aluminum propeller. Boat speed was 37.2-MPH at 5200-RPM. [A 15.25 x 15 aluminum propeller] clearly isn't the right propeller, but I wanted to see if I could get engine speed to increase. In one day I will retes...
by epj
Sat May 16, 2020 9:15 pm
Forum: PERFORMANCE
Topic: 1976 Outrage 19 Re-power
Replies: 7
Views: 4094

1976 Outrage 19 Re-power

[On a 1976 OUTRAGE 19 boat] I re-powered with a [1999 Ocean Pro V6] 150-HP engine from a [1999] four-cylinder 130-HP engine While the horsepower increase is minimal, I still hope to get increased torque and top-end. Both motors have excellent compression and spark. The Ocean Pro 150-HP is 25-inch-sh...