CONTINUOUSWAVE

John_Madison CT

Thanks. Who do you think sells this? Make a cut in the main rear frame. Add more tubing to it. If the frame is aluminum, you should be able to find telescoping sizes of aluminum tubing. Often aluminum tubing is sold in 0.058-wall thickness. With that wall thickness, a change in OD of 0.125-inch will...

John_Madison CT

Well guys, I'm back in the game. I've been on this website for many years, started with a Montauk 17, then went to a Outrage 22 Whaler Drive, then back to a Sport 13, Center Console 15, and a Outrage 25 Cuddy Whaler Drive. I sold my last two Whalers a couple years ago and was boatless in 2018. That ...

John_Madison CT

Could you please email me pics? JMetaxas@aol.com

John_Madison CT

Thanks [Phil]. I called a local marina with a very reputable fiberglass shop for a ballpark estimate to fix this, and they quoted $4,500.

So, if I end up with the boat, I'll be doing the repair myself.

John_Madison CT

I'm looking at an older 25' Whaler and the hatch covering the fuel tank has too much flex, is clearly rotten, and needs to be fixed. I tried the search function here but couldn't find much on it, but I'm not sure I'm using the proper search words. Is there a thread, or a place that you guys can poin...

John_Madison CT

Boat was Sold today and is on its way to Cleveland Ohio.

John_Madison CT

25' Boston Whaler Outrage - '89 Whaler Drive Super Console Twin 150hp Original reliable power. Electronics: Garmin 94SV, Lawrence Elite 7, New Icom VHF Fuel: 142 gallon'' No Trailer. Located in Clinton, CT and is available for test drive for another 2 months. Price: $13900 If you know these boats, y...

John_Madison CT

My 1989 Outrage 25 Cuddy with Whaler Drive is currently powered with twin original Johnson 150-HP outboards. I eventually plan on re-powering with a single outboard, probably a single 300-HP four-stroke-power-cycle engine. Even though these 1989 Johnson 150 engines are quite light for their horsepow...

John_Madison CT

I don't understand........you have a price in mind, but won't post it?

I have a price in mind to offer.......but rather not reveal it. : ))

John_Madison CT

I have one available. It's still on the top piece of wood from the console. I haven't had time to take it off yet.

I also have the rest of the steering components.

Email me at: OffshoreFishGear@aol.com

John_Madison CT

All new wood, 7 coats varnish. New Specialty Marine Console. New 13 gal gas tank ,battery, LED Lights, USB charger, etc etc.... Set up for serious fishing with 7 rod holders and live well pump. Trailer is 2012, used 3 times, perfect. Price: $8200 Located in Old Lyme, CT Pics can be seen here: https:...

John_Madison CT

IMO, that Radar arch is a terrible design. You've so destroyed the fishing room in the cockpit. Why not just put up Tee Top?

John_Madison CT

Hi Dan. I remember you from way back!

John_Madison CT

One of the biggest "sayings" that are full of $hit is........"you get what you pay for"......

John_Madison CT

No problem with the weight. My buddy has that exact boat, a Yamaha F250 on Whaler 22 with Whaler Drive. I have a 25' Outrage Cuddy with Whaler Drive and considering going to a single 300-HP four-stroke-power-cycle engine from twin Johnson 150-HP two-stroke-power-cycle engines .

John_Madison CT

I've ordered from Marinepartdepot.com before. You'll eventually get what you ordered, but in at least 20 attempts, I've never received either an email or phone reply.

They simply won't respond.

The only way you'll get attention is to dispute a Paypal payment and file a claim.

John_Madison CT

Can you email me a pic or two? Jmetaxas@aol.com

John_Madison CT

The 13' Whaler is a great boat, but the 15' is even better. The ride is significantly better, less pounding.

John_Madison CT

What does thoroughly "was" mean?

Just keeping in the spirit of spelling and grammatical accuracy. : )

John_Madison CT

Took the new 15' out for her maiden voyage. With myself and girlfriend, she hit 32mph. The engine is mounted all the way down, so perhaps the 48hp can be raised, but there's no tach onboard so I don't know if it's the right prop..

All in all, not bad.

John_Madison CT

: IMG_5159.JPG (108.64 KiB) Viewed 2279 times

John_Madison CT

At one point last year I owned a [1966 13-footer], a [1986 15-footer] and an [1989 25-footer]. The two smaller ones were sold last winter, and i was down to one. Well. that changed already. I just bought a 15-footer, a 1977 with a [1996] Johnson 48-HP for $2,500. Trailer is two-years-old and, on the...

John_Madison CT

Just a bit of advise:

1. Post location
2. Add a lot more detail. (i.e. year of motor, engine pics, etc etc....)

John_Madison CT

Post location.

John_Madison CT

Without pics and more detail, probably under $2000. Maybe less. An engine that old with low compression has little value.

John_Madison CT

I would have assumed Tom was a sour curmudgeon based on some of his posts, but I'm happy to see him smile.

John_Madison CT

Yasou Fotis!! I'm a Greek-American with family roots in Kefalonia.

Finding a used Whaler Drive is very very hard. I don't think you'll find one. Are you sure the stress cracks aren't just cosmetic?

Efxharisto,

Yianni Metaxas

John_Madison CT

When I re-powered my 25' Outrage Whaler Drive, currently with twin 1989 Johnson 150 engine, I'm leaning toward a single 300-HP.

John_Madison CT

The fuel tank in my 25" Outrage is original. ('89) . I originally bought the boat, then resold it for a profit, but to make a long story short, bought it back. The guy who owned it for a few months did some really nice improvements, one being a drain in the fuel tank cavity. It's simply a PVC p...

John_Madison CT

You may want to post:

1. Location
2. Contact info
3. Pics

John_Madison CT

Many moons ago I used to sell Acetone. I remember visiting the Whaler Rockland plant moments after they just told the employees that the were closing the plant. I'm guessing that was around 1990. I felt terrible for them.

John_Madison CT

I'd love to post pics, but it's rather annoying and cumbersome on this website.

If interested, they're in this Ebay ad:

http://www.ebay.com/itm/291768298678?ss ... 1555.l2649

John_Madison CT

You shouldn't have any problem towing a 13' Whaler.

John_Madison CT

I just repowered my 1990 Outrage 25 WhalerDrive with twin 150 counter rotating Hondas. I can't comment on performance as I will not launch for a few more weeks. Let us know about the repower. I'm contemplating twin 150hp Suzuki 4 strokes, 2016 models on my [1989] Outrage 25 Cuddy Whaler Drive. Thes...

John_Madison CT

Lots of tire kickers and people without money. Still available.

John_Madison CT

25' 1989 Outrage Cuddy Whaler Drive

13' 1967 Sport (for sale in Marketplace)

Just sold my 15' ('86) Center Console

[Good example of instability of owning three Boston Whaler boats--jimh]

John_Madison CT

I get group 29 deep cycle batteries from Advance Auto for around $90. Regular, reliable lead acid. I don't see the real gains going with these expensive ones.

John_Madison CT

Lots of phone calls but no takers yet.

John_Madison CT

: image.jpg (153.33 KiB) Viewed 2151 times

John_Madison CT

I've owned this for a long time and have too many projects going on, so time to move on. 1967 Boston Whaler 13'. Hull is dry and in decent shape. Some typical gel coat crazing, but solid. Can be enjoyed as is for many years, or you can restore. - Brand New Mahogany Console - Brand New Teleflex Steer...

John_Madison CT

I snapped a pic for the owner as the boat is very close to my home.

: image.jpg (143.26 KiB) Viewed 4412 times

John_Madison CT

Would love to see pics! A single engine 25' with Whaler Drive is rare.

John_Madison CT

I'd like to share notes with you. I have a '89 25' Whaler Outrage Cuddy/Whaler Drive/Super Console. I have original twin 150hp Johnson's with 1200 and 850 hours. My new to me 1990 Outrage 25: 1. Repower twin Honda 150s 2. Make new teak doors on super console and new track hatch covers on transom dec...

John_Madison CT

Wow nice work!! You should make a few and sell them.

John_Madison CT

Can you email me pics? Jmetaxas@aol.com

John_Madison CT

Russell: do you ever make it up to NJ, NY, New England area?

John_Madison CT

My '89 25' Outrage Cuddy, Whaler Drive, Super Console with Trailer is always for sale. It has original 150hp Johnson Outboards that run well.

I've done a lot of upgrades.

Price will be $17,900. If interested, I can email pics, more details, etc......

John

John_Madison CT

What was wrong with the 90-HP? Those are very reliable motors.

[Moderator's note: I think what is being suggested here is the original engine ought to be repaired instead of replaced--jimh]

John_Madison CT

This is what I found underneath:

John_Madison CT

image.jpg Here's an update. Got the cushion from Anderson Manuf.. Nice work. Expensive, but decent. I filled all the holes and gouges with filler bondo, sanded everything down, refilled, re-bondo any dips, resand everything. I used a low cost single part Topside paint by Rustoleum. $14/quart from H...

Search found 66 matches