Search found 193 matches

by InVision
Mon Oct 15, 2018 4:28 pm
Forum: PERFORMANCE
Topic: c.2004 190 NANTUCKET: Jackplate to Correct Bow Riding Too High
Replies: 33
Views: 2706

Re: c.2004 190 NANTUCKET: Jackplate to Correct Bow Riding Too High

Well it is still on dock boat lift which is good since Hurricane Michael decided to visit the panhandle. Tomorrow we will be taking her out and finalizing the motor height. May come up one more hole. I did put a couple of lead shot bags in anchor locker and she stop purposing. Going to see where the...
by InVision
Thu Oct 04, 2018 9:57 am
Forum: REPAIRS and MODIFICATIONS
Topic: Remove Mildew on Cushions
Replies: 7
Views: 1078

Re: Remove Mildew on Cushions

Good to hear. Glad I suggested it. I was considering new seat cushions also. I bought a Rolex YachtMaster Watch instead. :-)

M
by InVision
Wed Sep 12, 2018 2:32 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Remove Mildew on Cushions
Replies: 7
Views: 1078

Re: Remove Mildew on Cushions

Well I tried 3 different products without noticeable improvement. I then splurged for a Marine 31 Mildew Kit, with free return if I was not satisfied. The Marine 31 Kit knocked it out of the ballpark. The before photo below shows what the seats looked like after the 3 other products were tried. Then...
by InVision
Thu Sep 06, 2018 4:02 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Remove Mildew on Cushions
Replies: 7
Views: 1078

Remove Mildew on Cushions

Is there a magic trick that can clean slight mildew from vinyl seats?

Appreciate any tips.

M

IMG_1064.jpeg
IMG_1064.jpeg (54.55 KiB) Viewed 1078 times


IMG_1063.jpeg
IMG_1063.jpeg (58.89 KiB) Viewed 1078 times
by InVision
Tue Sep 04, 2018 10:40 am
Forum: PERFORMANCE
Topic: c.2004 190 NANTUCKET: Jackplate to Correct Bow Riding Too High
Replies: 33
Views: 2706

Re: c.2004 190 NANTUCKET: Jackplate to Correct Bow Riding Too High

Yea. Don't really need anymore weight in back either.

M
by InVision
Tue Sep 04, 2018 9:15 am
Forum: PERFORMANCE
Topic: c.2004 190 NANTUCKET: Jackplate to Correct Bow Riding Too High
Replies: 33
Views: 2706

Re: c.2004 190 NANTUCKET: Jackplate to Correct Bow Riding Too High

Had Heart Surgery. I will get back to it in a couple of weeks.

M
by InVision
Tue Sep 04, 2018 9:06 am
Forum: PERFORMANCE
Topic: c.2004 190 NANTUCKET: Jackplate to Correct Bow Riding Too High
Replies: 33
Views: 2706

Re: c.2004 190 NANTUCKET: Jackplate to Correct Bow Riding Too High

I wanted a 150 HO. The deal on this display model ETEC 150 was $7K less. Anyway water under the bridge.

M
by InVision
Tue Aug 28, 2018 10:46 am
Forum: PERFORMANCE
Topic: c.2004 190 NANTUCKET: Jackplate to Correct Bow Riding Too High
Replies: 33
Views: 2706

Re: c.2004 190 NANTUCKET: Jackplate to Correct Bow Riding Too High

The 2004 Nantucket is rated at max 150hp.

M
by InVision
Sat Aug 18, 2018 10:03 am
Forum: PERFORMANCE
Topic: c.2004 190 NANTUCKET: Jackplate to Correct Bow Riding Too High
Replies: 33
Views: 2706

Re: c.2004 190 NANTUCKET: Jackplate to Correct Bow Riding Too High

Hi Butch. Yes I have trim tabs.

Thanks

M
by InVision
Fri Aug 17, 2018 5:19 pm
Forum: PERFORMANCE
Topic: c.2004 190 NANTUCKET: Jackplate to Correct Bow Riding Too High
Replies: 33
Views: 2706

Re: c.2004 190 NANTUCKET: Jackplate to Correct Bow Riding Too High

With WOT RPM of 6000*, Gear ratio of 2.17*, slip of 5% and a target speed of 50-MPH**, the prop calculator comes back with 20" of pitch. * per Evinrude website ** per performance report of 190 Outrage with Mercury 150 FourStroke. I tried two propeller calculators, and both [calculated boat spe...
by InVision
Fri Aug 17, 2018 11:53 am
Forum: PERFORMANCE
Topic: c.2004 190 NANTUCKET: Jackplate to Correct Bow Riding Too High
Replies: 33
Views: 2706

Re: c.2004 190 NANTUCKET: Jackplate to Correct Bow Riding Too High

At 2nd holes down. [Please don’t invent new methods for describing engine mounting height. Describe engine mounting height in units of 0.75-inch or “hole” (as in the spacing distance between pre-drilled mounting holes) that the engine has been raised from the lowest position. All other methods just ...
by InVision
Fri Aug 17, 2018 8:33 am
Forum: PERFORMANCE
Topic: c.2004 190 NANTUCKET: Jackplate to Correct Bow Riding Too High
Replies: 33
Views: 2706

Re: c.2004 190 NANTUCKET: Jackplate to Correct Bow Riding Too High

I have settled on a VIPER 18-pitch [which allows the E-TEC G2 150-HP engine to accelerate to] 5750-RPM at full throttle [and produces a boat speed of] 45-MPH. The REBEL propellers I tried were all dogs on [accelerating to plane from a standing start]. A VIPER 17-pitch [let the E-TEC G2 150-HP engine...
by InVision
Thu Aug 16, 2018 11:50 am
Forum: PERFORMANCE
Topic: c.2004 190 NANTUCKET: Jackplate to Correct Bow Riding Too High
Replies: 33
Views: 2706

Re: c.2004 190 NANTUCKET: Jackplate to Correct Bow Riding Too High

The 190 Nantucket was updated with an ETEC G2 150. [I am in the process of] trying different props which seem to require different motor heights. [I] was thinking, if [the engine were moved onto] a jack plate, I could easily change the engine height. Also, from what I have read the 6 to 8-inch set b...
by InVision
Tue Aug 14, 2018 4:45 pm
Forum: PERFORMANCE
Topic: c.2004 190 NANTUCKET: Jackplate to Correct Bow Riding Too High
Replies: 33
Views: 2706

c.2004 190 NANTUCKET: Jackplate to Correct Bow Riding Too High

Has a jackplate ever been installed on a c.2004 190 OUTRAGE or 190 NANTUCKET? I have concerns about the engine mounting height and the bow riding too high. [What are your] thoughts [about installing a jackplate on a c.2004 190 OUTRAGE in order to change the engine mounting height or to cause the bow...
by InVision
Sun Aug 12, 2018 4:48 pm
Forum: Introduction
Topic: Website Avatar
Replies: 3
Views: 572

Re: Website Avatar

Jim You tha man !! What is the new limit?

M
by InVision
Sun Aug 05, 2018 12:05 pm
Forum: The GAM
Topic: Console remodel on 2004 Nantucket
Replies: 13
Views: 1624

Last Finishing Touch - Console remodel on 2004 Nantucket

Found a $23 nice foot pad.

M

IMG_0983.JPG
IMG_0983.JPG (144.74 KiB) Viewed 1457 times


IMG_0984.JPG
IMG_0984.JPG (125.68 KiB) Viewed 1457 times
by InVision
Thu Aug 02, 2018 2:11 pm
Forum: Introduction
Topic: Website Avatar
Replies: 3
Views: 572

Website Avatar

I was wondering how to make an avatar size "6kb". I have a image I want to use as an avatar. I made it 90x90 pixels which makes it pretty hard to see. But the smallest size I can get with Photoshop with jpeg set at the most compression is 28kb. Most avatars on PHPBB forums are limited to 1...
by InVision
Thu Aug 02, 2018 12:04 pm
Forum: The GAM
Topic: Console remodel on 2004 Nantucket
Replies: 13
Views: 1624

Re: Console remodel on 2004 Nantucket

It is the Fusion StereoActive BT, USB, AM, FM and Weather. We use it in our boat, golf cart, pool, spa, porch, etc... Actually take it with us off the back of boat. Floats and is water proof.

Thank You

M
by InVision
Thu Aug 02, 2018 11:35 am
Forum: The GAM
Topic: Console remodel on 2004 Nantucket
Replies: 13
Views: 1624

Re: Console remodel on 2004 Nantucket

This is an inshore boat and we always have cell coverage. That is my iPhone on left and her iPhone on right. They are used mostly for communication, radar ,weather etc... Siri is great. Don't even have to take out of case! Believe me those iPhones are very tightly secured. No worries. We found on ev...
by InVision
Thu Aug 02, 2018 6:04 am
Forum: The GAM
Topic: Console remodel on 2004 Nantucket
Replies: 13
Views: 1624

Re: Console remodel on 2004 Nantucket

Thanks. Yep I used the hole that was existing. So far it has not been a problem. I figured if I needed to move I could always drill another hole. Don't like drilling :-)

M
by InVision
Wed Aug 01, 2018 3:08 am
Forum: The GAM
Topic: Console remodel on 2004 Nantucket
Replies: 13
Views: 1624

Re: Console remodel on 2004 Nantucket

TY Sir. We are very happy with the re-model.

M
by InVision
Sat Jul 28, 2018 10:19 am
Forum: REPAIRS and MODIFICATIONS
Topic: Through-hull Fitting Repairs c.2004 NANTUCKET
Replies: 46
Views: 7110

Re: Through-hull Fitting Repairs c.2004 NANTUCKET

I inspect our cheap plastic thru-hull fittings every couple of months. I found that the ones on the Nantucket that go bad first are the ones below the starboard side rear seat. IMHO - The reason is that they have unsupported rubber hoses which tend to bounce around and put extra pressure on the thru...
by InVision
Fri Jul 27, 2018 11:07 am
Forum: The GAM
Topic: Console remodel on 2004 Nantucket
Replies: 13
Views: 1624

Re: Console remodel on 2004 Nantucket

Thank you Sirs. My wife and I planned the remodel right down to the Captain & 1st Mates iPhone Holders.

M
by InVision
Fri Jul 27, 2018 9:23 am
Forum: The GAM
Topic: Console remodel on 2004 Nantucket
Replies: 13
Views: 1624

Console remodel on 2004 Nantucket

I am finished remodeling the 2004 Nantucket Console. Got everything we wanted in the place we wanted it.

What do you think?

M

console-nantucket.jpg
console-nantucket.jpg (160.95 KiB) Viewed 1624 times
by InVision
Sat Jul 21, 2018 9:26 am
Forum: PERFORMANCE
Topic: 2004 190 Nantucket Re-power with Evinrude E-TEC G2
Replies: 73
Views: 6384

Re: 2004 190 Nantucket Re-power with Evinrude E-TEC G2

Hi Yiddil. I would not put a ETEC G2 on my Nantucket 190 if I had to do it all over. One of reasons is weight. The G2 is almost 100 lbs heavier than the G1. Don't get me wrong, I love the G2 motor feature wise. 10 year warranty is unprecedented. It looks sweet. Auto Trim is very nice. The downside h...
by InVision
Sun Jul 15, 2018 4:51 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Through-hull Fitting Repairs c.2004 NANTUCKET
Replies: 46
Views: 7110

Re: Through-hull Fitting Repairs c.2004 NANTUCKET

Man what a bummer. I replace ours and it was a PIA but solid with no rot. Again I just found because of another member posting this thread. Very thankful...

Goodluck and I have heard of folks digging out small areas of rot and injecting with Epoxy.

M
by InVision
Tue Jul 10, 2018 7:57 am
Forum: PERFORMANCE
Topic: Nantucket 190 E-TEC G2 prop selection
Replies: 3
Views: 559

Re: Nantucket 190 ETEC G2 prop selection

According to everything I have read the engine height should be set to where the anti-ventilation plate is just out of the water and not submerged shown in video. I did finally find the part number for RX4 16P prop (177340). I will run the Rebel 17P and if that is not optimal then I will order a RX4...
by InVision
Mon Jul 09, 2018 10:57 am
Forum: PERFORMANCE
Topic: Nantucket 190 E-TEC G2 prop selection
Replies: 3
Views: 559

Nantucket 190 E-TEC G2 prop selection

I have now updated our Nantucket with a E-TEC G2 150 HP engine, and am now trying to nail down the propeller for this boat. The dealer installed a Viper 14.75 x 17-pitch propeller, but WOT put engine speed over 6,000-RPM. Then he installed a Viper 14.75 x19, and the time to plane suffered and WOT on...
by InVision
Sun Jul 08, 2018 8:28 am
Forum: PERFORMANCE
Topic: 2004 190 Nantucket Re-power with Evinrude E-TEC G2
Replies: 73
Views: 6384

Re: 2004 190 Nantucket Re-power with Evinrude E-TEC G2

Jim you are sure thorough--Thank you. I have decided to stick with a Evinrude prop after talking with the local prop guru. He said they had a great design and if he had a E-TEC G2 he would use an Evinrude prop. He also said to get as close as I can with a prop. Then he would test and blueprint the p...
by InVision
Sat Jul 07, 2018 7:18 pm
Forum: PERFORMANCE
Topic: 2004 190 Nantucket Re-power with Evinrude E-TEC G2
Replies: 73
Views: 6384

Re: 2004 190 Nantucket Re-power with Evinrude E-TEC G2

Jim that is the point. Exactly. Don't want to endanger my 10 year warranty !!

Will report back. As of now if the Rebel doesn't work well going for the RX4 !!

M
by InVision
Sat Jul 07, 2018 11:53 am
Forum: PERFORMANCE
Topic: 2004 190 Nantucket Re-power with Evinrude E-TEC G2
Replies: 73
Views: 6384

Re: 2004 190 Nantucket Re-power - Ended up with Evinrude ETEC G2...

Thanks Jim.

It turns out there was a question about warranty if using another prop than Evinrude installed by dealer.

Going to try the Rebel 15 x17--pitch. Next stop is the RX4 at 15 x 18-pitch if the REBEL does not work out.

M
by InVision
Fri Jul 06, 2018 5:01 pm
Forum: PERFORMANCE
Topic: 2004 190 Nantucket Re-power with Evinrude E-TEC G2
Replies: 73
Views: 6384

Re: 2004 190 Nantucket Re-power

First choice - 14" x 19" Mercury Enertia / Quicksilver Q3 Second Choice is the BPR RX4. Start with 19". Leave vent holes closed. I would not settle on a prop because it is the one available at the dealer. The Enertia recommendation was #1 and provided by a whaler prop guru who is wid...
by InVision
Fri Jul 06, 2018 12:59 pm
Forum: PERFORMANCE
Topic: 2004 190 Nantucket Re-power with Evinrude E-TEC G2
Replies: 73
Views: 6384

Re: 2004 190 Nantucket Re-power

Ok I wanted the lightest 150-HP E-TEC G2. Still the Optimax 150hp was a few pounds lighter but the Optimax had an external oil tank. Also dealer said if I used existing SeaStar Hydraulic I needed the one without built in steering. BTW - the best feature on the ETEC G2 by far is the iTrim (automatic ...
by InVision
Fri Jul 06, 2018 12:48 pm
Forum: PERFORMANCE
Topic: 2004 190 Nantucket Re-power with Evinrude E-TEC G2
Replies: 73
Views: 6384

Re: 2004 190 Nantucket Re-power

ETEC 150 HP model C150PXAA. Not sure what a Trac+ midsection is.
by InVision
Fri Jul 06, 2018 11:54 am
Forum: PERFORMANCE
Topic: 2004 190 Nantucket Re-power with Evinrude E-TEC G2
Replies: 73
Views: 6384

Re: 2004 190 Nantucket Re-power

So here is what I got... 60gals fuel 2 passengers. viper 14.5"x17P - WOT 44mph @ 6150 RPM - Great torque slightly over redline. viper 14.5"x19P - WOT 47mph @ 5600 rpm - Less torque So obvious the viper 18P looks like the one. I am considering the RX4 at 18p also. A little bigger with vents...
by InVision
Fri Jul 06, 2018 11:48 am
Forum: PERFORMANCE
Topic: 2004 190 Nantucket Re-power with Evinrude E-TEC G2
Replies: 73
Views: 6384

Re: 2004 190 Nantucket Re-power

Divin'Ivan wrote:I've hit 50 mph in glassy conditions
Which Prop?
by InVision
Thu Jul 05, 2018 4:19 pm
Forum: PERFORMANCE
Topic: 2004 190 Nantucket Re-power with Evinrude E-TEC G2
Replies: 73
Views: 6384

Re: 2004 190 Nantucket Re-power

The dealer is going to let me try a Viper 14.75" x 19" next week. If that does not work well I will be ordering a RX4 15"x18p.

M
by InVision
Thu Jul 05, 2018 11:32 am
Forum: PERFORMANCE
Topic: 2004 190 Nantucket Re-power with Evinrude E-TEC G2
Replies: 73
Views: 6384

Re: 2004 190 Nantucket Re-power

Thanks Phil. So would not a 4 blade drop my WOT speed? A four blade in 19P is quite a difference. Experience says when going with 4 blade you should drop pitch one from a 3 blade pitch. RX4 write-ups say that it is made for ETEC G2. All in all props are a black science to me. What is the WOT in MPH ...
by InVision
Thu Jul 05, 2018 9:38 am
Forum: PERFORMANCE
Topic: 2004 190 Nantucket Re-power with Evinrude E-TEC G2
Replies: 73
Views: 6384

Re: 2004 190 Nantucket Re-power

I am looking for information on prop size and pitch for my ETEC G2. I currently have a Viper 14.75 x 17p and the top end seems slow at 45mph on GPS and I also see it in the red on gauge which is above 6000 rpms. Thinking of maybe a 18p or 19p prop. Maybe another model? Not sure...

Thank you

M
by InVision
Wed Jul 04, 2018 2:41 pm
Forum: PERFORMANCE
Topic: 2004 190 Nantucket Re-power with Evinrude E-TEC G2
Replies: 73
Views: 6384

Re: 2004 190 Nantucket Re-power

Thanks all !! Nothing like having a classic Nantucket with a new generation motor and a TEN YEAR WARRANTY !!

M
by InVision
Wed Jul 04, 2018 4:14 am
Forum: PERFORMANCE
Topic: 2004 190 Nantucket Re-power with Evinrude E-TEC G2
Replies: 73
Views: 6384

Re: 2004 190 Nantucket Re-power

I have only prepared for fresh water bladder. Installed water filler where oil tank fill was and ran wire from the accessory switch. Kind of an odd space so taking my time.

M
by InVision
Tue Jul 03, 2018 6:20 pm
Forum: PERFORMANCE
Topic: 2004 190 Nantucket Re-power with Evinrude E-TEC G2
Replies: 73
Views: 6384

Re: 2004 190 Nantucket Re-power

The mechanic said [the engine would be mounted], "in the second hole." The three bolts are because the previous owner had a [TurboSwing, a brand of towing bar, mounted]. Mechanic said he would just keep the six bolts. The prop is a VIPER 14 3/4 x 17-pitch WOT is exactly 6,000-RPM. Before [...
by InVision
Tue Jul 03, 2018 5:48 pm
Forum: PERFORMANCE
Topic: 2004 190 Nantucket Re-power with Evinrude E-TEC G2
Replies: 73
Views: 6384

Re: 2004 190 Nantucket Re-power

a couple misc ones...

M

IMG_0843.jpeg
IMG_0843.jpeg (159.56 KiB) Viewed 3383 times


IMG_0850.jpeg
IMG_0850.jpeg (180.3 KiB) Viewed 3383 times


IMG_0855.jpeg
IMG_0855.jpeg (142.31 KiB) Viewed 3383 times
by InVision
Tue Jul 03, 2018 5:47 pm
Forum: PERFORMANCE
Topic: 2004 190 Nantucket Re-power with Evinrude E-TEC G2
Replies: 73
Views: 6384

Re: 2004 190 Nantucket Re-power

More of console

M

IMG_0854.jpeg
IMG_0854.jpeg (157.42 KiB) Viewed 3383 times


IMG_0853.jpeg
IMG_0853.jpeg (166.97 KiB) Viewed 3383 times


IMG_0851.jpeg
IMG_0851.jpeg (184.4 KiB) Viewed 3383 times
by InVision
Tue Jul 03, 2018 5:44 pm
Forum: PERFORMANCE
Topic: 2004 190 Nantucket Re-power with Evinrude E-TEC G2
Replies: 73
Views: 6384

Re: 2004 190 Nantucket Re-power

Got boat back today. What a difference a ETEC G2 makes. Quieter all around and shift is like silk. We have 15 mph winds today, 2-3ft whitecaps in bay but I went back in the bayous and she was cruising at 37 mph GPS and getting 5.8 mpg. The trim tabs that Boston Whaler recommends for this boat 9"...
by InVision
Thu Jun 21, 2018 5:32 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Nantucket or Outrage 190: Adding Water Tank
Replies: 1
Views: 352

Nantucket or Outrage 190: Adding Water Tank

Has anyone replaced the oil tank on a Nantucket or Outrage 190 with a fresh water tank?

Is there a good solution for a tank with a pump mounted on the tank?

Thanks for any help.—M
by InVision
Thu Jun 21, 2018 3:55 pm
Forum: PERFORMANCE
Topic: 2004 190 Nantucket Re-power with Evinrude E-TEC G2
Replies: 73
Views: 6384

Re: 2004 190 Nantucket Re-power

Boat was completely striped of Optimax. Engine sold for $3700 which helps a bunch on re-power cost. Technician relocated key to Optimax buzzer hole. Mounted trim tab LED control in lanyard hole. Fiberglass guy is up next to fix console and transom. Making room for fresh water tank where oil tank was...
by InVision
Tue Jun 19, 2018 5:19 pm
Forum: PERFORMANCE
Topic: 2004 190 Nantucket Re-power with Evinrude E-TEC G2
Replies: 73
Views: 6384

Re: 2004 190 Nantucket Re-power

Starting removing console and preparing for new layout.

M

IMG_0740.JPG
IMG_0740.JPG (154.54 KiB) Viewed 3650 times
by InVision
Tue Jun 19, 2018 5:18 pm
Forum: PERFORMANCE
Topic: 2004 190 Nantucket Re-power with Evinrude E-TEC G2
Replies: 73
Views: 6384

Re: 2004 190 Nantucket Re-power

I plan on documenting the re-power in this thread. Here is what we started with.

M

IMG_0726.JPG
IMG_0726.JPG (155.87 KiB) Viewed 3650 times


IMG_0727.JPG
IMG_0727.JPG (141.69 KiB) Viewed 3650 times


IMG_0729.JPG
IMG_0729.JPG (123.99 KiB) Viewed 3650 times
by InVision
Tue Jun 19, 2018 5:10 pm
Forum: SMALL BOAT ELECTRICAL
Topic: Replacement Gauges for SmartCraft
Replies: 2
Views: 496

Re: Replacement Gauges for SmartCraft

Here is what I purchased. Icon Basic which fit in the Smartcraft holes. As soon as I get the SmartCraft Gauges, Harness and speedo speedo sender removed I will list in classified incase anyone wants the Mercury SmartCraft. Only wish would be for black bezels but it should be good looking. Thanks you...