Search found 199 matches
- Tue Sep 05, 2023 9:17 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2016 G2 E-TEC 200 H.O Fuel Priming
- Replies: 1
- Views: 1918
2016 G2 E-TEC 200 H.O Fuel Priming
On my 2016 210 Montauk I have a 2016 G2 E-TEC 200 H.O. model E200XHAGD. The fuel pump-reservoir gasket is leaking, and unfortunately the entire pump-reservoir needs to be replaced. My G2 uses the obsolete Carter #5009838 pump-reservoir which has been replaced with a Walbro pump-reservoir kit #501069...
- Wed Nov 16, 2022 3:46 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2014 170 MONTAUK: Fuel Hose Route with 22-gallon Tank
- Replies: 19
- Views: 3296
Re: 2014 170 MONTAUK: Fuel Hose Route with 22-gallon Tank
The on-deck Moeller white fuel tank shown above in Figure 2 has been moved aft about three inches. I presume the fuel hose enters the rigging tunnel on the forward side of the fuel tank. Jim is correct. Figure 2 illustrates my 2005 170 Montauk with the 22-gallon Moeller on-deck fuel tank. The fuel ...
- Mon May 17, 2021 9:48 am
- Forum: MARKETPLACE
- Topic: Free Dometic's SaniPottie
- Replies: 2
- Views: 4035
Re: Free Dometic's SaniPottie
The Dometic SaniPottie is no longer available.
- Sun May 16, 2021 1:38 pm
- Forum: MARKETPLACE
- Topic: Free Dometic's SaniPottie
- Replies: 2
- Views: 4035
Free Dometic's SaniPottie
Cleaning out the garage so here is a free Dometic's SaniPottie. I removed this Dometic's SaniPottie (Model 962 - I believe) from my 2016 Montauk 210 when I took delivery of the boat. It was never used and is the OEM model that Boston Whaler uses. I am asking $20 for shipping or free local pickup (Ma...
- Mon May 03, 2021 12:17 pm
- Forum: The GAM
- Topic: 170 Montauk Instrument Panel Replacement
- Replies: 12
- Views: 6003
Re: 170 Montauk Instrument Panel Replacement
As a side note to your [i.e., BMAT5's] comment about a factory stereo audio amplifier option not being available: indeed there was an option for a factory installed stereo audio amplifier. A specialized KING StarBoard mounting bracket (Callout 65) was installed behind the console door to hold the st...
- Sun May 02, 2021 2:09 pm
- Forum: MARKETPLACE
- Topic: FS: Flanging Tool, $3 Shipping
- Replies: 4
- Views: 5287
Re: FS: Flanging Tool, $3 Shipping
You got it Phil, no cost.
You give a lot to the forum happy to send it to you.
You give a lot to the forum happy to send it to you.
- Sun May 02, 2021 11:06 am
- Forum: MARKETPLACE
- Topic: FS: Flanging Tool, $3 Shipping
- Replies: 4
- Views: 5287
FS: Flanging Tool, $3 Shipping
For-sale: for $3 (to cover shipping cost) a 1-inch OD Flanging Tool Moeller Part Number 020700-00
Email: josephp732@aol.com
Email: josephp732@aol.com
- Thu Nov 19, 2020 7:03 pm
- Forum: The GAM
- Topic: The MOELLER 24-gallon White On-deck Fuel Tank for Boston Whaler Boats
- Replies: 4
- Views: 11159
Re: The MOELLER 24-gallon White On-deck Fuel Tank for Boston Whaler Boats
Here is the [Moeller 24-gallon on-deck fuel] tank mounted under the reversible pilot seat (RPS) on a 2005 170 Montauk. It was installed in 2010 and has performed well for over 10 years.
- Sun Sep 13, 2020 10:25 am
- Forum: MARKETPLACE
- Topic: 2005 170 Montauk with 2010 E-Tec 115 HO - for sale in FL
- Replies: 1
- Views: 2317
SOLD - 2005 170 Montauk with 2010 E-Tec 115 HO - for sale in FL
This boat has been sold.
- Sat Sep 05, 2020 12:46 pm
- Forum: MARKETPLACE
- Topic: 2005 170 Montauk with 2010 E-Tec 115 HO - for sale in FL
- Replies: 1
- Views: 2317
2005 170 Montauk with 2010 E-Tec 115 HO - for sale in FL
I am putting up for sale my 2005 170 Montauk with 2010 E-Tec 115 HO The boat is located in Punta Gorda, FL If you search the CW forum you can follow the re-power and build. Asking $22k Joe Pickel 732-580-9701 I here is my ebay listing with a full description and pictures. https://www.ebay.com/itm/17...
- Sat Aug 31, 2019 9:05 am
- Forum: The GAM
- Topic: 16 to 17-footer for Commercial Passenger Use
- Replies: 20
- Views: 16679
Re: 16 to 17-footer for Commercial Passenger Use
Jimh - There is one direct-injection four-stroke-power-cycle outboard engine. Although not fit for purpose for the application being discussed. The Yamaha V8 5.6L uses direct-injection with fuel delivery up to 2900 PSI. https://yamahaoutboards.com/en-us/home/outboards/xto-offshore/v8-5-6l Direct-inj...
- Sat Aug 31, 2019 8:51 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2004 Nantucket 190 Vibration
- Replies: 26
- Views: 28682
Re: 2004 Nantucket 190 Vibration
I do not think that vibration is being caused by an off balanced propeller - that does seem like the engine is dropping a cylinder. As recommended, a Mercury mechanic should do a diagnostic on the engine.
- Mon Jun 17, 2019 9:15 am
- Forum: MARKETPLACE
- Topic: SOLD - 1986 OUTRAGE 18, $8,500 in New Jersey
- Replies: 21
- Views: 21330
Re: FS: 1986 OUTRAGE 18, $9,500 in New Jersey
I sent you a PM.
- Sat Feb 02, 2019 9:16 am
- Forum: SMALL BOAT ELECTRICAL
- Topic: Adding USB outlet
- Replies: 15
- Views: 18489
Re: Adding USB outlet
PAT--get a dual LED Waterproof Rocker Switch Control Panel and change out one of the switches with a rocker style USB outlet.
This would keep more of a marine appearance.
This would keep more of a marine appearance.
- Sat Feb 02, 2019 12:47 am
- Forum: MARKETPLACE
- Topic: Appraisal: 2015 170 Montauk
- Replies: 3
- Views: 4261
Re: Appraisal: 2015 170 Montauk
Some quick research puts a private sale at $26,000 to $27,000; if offered by a dealer then the price would be $28,000 to $29,000.
- Thu Jan 31, 2019 11:02 am
- Forum: The GAM
- Topic: 150 Montauk v. 158 Edgewater v. 15 Key West
- Replies: 11
- Views: 10676
Re: 150 Montauk v. 158 Edgewater v. 15 Key West
Out of all three the 150 Montauk will have the most usable space, as the beam is carried all the way forward, and as noted the stern is unobstructed. The Keywest is the oldest desgn by far - that boat dates back to the late 1990's and it's amusing that Keywest still has the boat on their website sho...
- Tue Jan 29, 2019 9:35 am
- Forum: The GAM
- Topic: VW Jetta For Towing MONTAUK
- Replies: 12
- Views: 8544
Re: VW Jetta For Towing MONTAUK
The only engine available in a 2019 VW Jetta is the VW gasoline 1.4L TSI a 16-valve, DOHC, in-line 4-cylinder turbocharged, direct injection engine with 147 hp, 184 lb-ft of torque. Ever since the diesel scandal in 2015, VW stopped offering TDI versions of the Golf, Jetta, Beetle, Passat and Touareg...
- Fri Jan 25, 2019 5:54 pm
- Forum: The GAM
- Topic: VW Jetta For Towing MONTAUK
- Replies: 12
- Views: 8544
Re: VW Jetta For Towing MONTAUK
I would say that your going to be really pushing the limit of the car for a trip of this length. I have towed my boats from NJ to FL many times and I would be concerned with the 1.4L Turbo engine being in boost often and the ability to stop in an emergency situation with the Jetta's smaller brakes. ...
- Thu Jan 10, 2019 12:08 pm
- Forum: The GAM
- Topic: Winter Boat-dreaming About a New Boston Whaler
- Replies: 15
- Views: 10146
Re: Winter Boat-dreaming About a New Boston Whaler
With Jerry's Jones net worth of ~$6.2 billion then he under spent by about 60% on his new to him $250 million 358-foot long boat with annual maintenance costs of about $25 million. Maybe he's getting ready for a Great Lakes loop trip in 2022 when the Cowboys play at the Bears, Lions and Packers! I w...
- Wed Dec 26, 2018 12:30 pm
- Forum: PERFORMANCE
- Topic: 2001 28 Conquest re-power
- Replies: 5
- Views: 9964
Re: 2001 28 Conquest re-power
As a former owner of a 2002 295 Conquest (the same boat - ~31' in length, 6,600LBS dry weight, 10'4" beam), going up 150hp and keep the weight the same is a good move. I believe that you would be much happier with the performance of twin OptiMax 300XS'. This is a big boat with a wide beam and a...
- Sun Dec 16, 2018 11:14 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 170 Montauk: Identify Part Name
- Replies: 2
- Views: 2976
Re: 170 Montauk: Identify Part Name
Boatsmith - This was discussed in a previous thread: viewtopic.php?f=6&t=3303
Jim posted a source for this part in the link above.
Jim posted a source for this part in the link above.
- Thu Dec 13, 2018 1:25 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Summer storage
- Replies: 5
- Views: 4667
Re: Summer storage
Florida is tough environment to shrink-wrap a boat and not incur some type of mold or mildew. Buckets of Damp-Rid will fill up in short order on any covered boat in Florida. Mine did. I had a tight fitting waterproof cover on a non-Boston-Whaler boat, It was a constant battle with mold and mildew. S...
- Sun Dec 09, 2018 9:48 am
- Forum: The GAM
- Topic: Which Whaler
- Replies: 7
- Views: 6107
Re: Which Whaler
Hey Jim - I just sent you a PM!
- Mon Nov 19, 2018 5:45 pm
- Forum: The GAM
- Topic: Which Whaler
- Replies: 7
- Views: 6107
Re: Which Whaler
I have a 210 Montauk and use it on the Gulf Coast of Florida. Charlotte Harbor out into the Gulf up to ~25 miles offshore on a nice day - I will tow it to the keys every once in awhile. If your doing a mixed of inshore flats with some offshore reef fishing on nice days, the Montauk is a good platfor...
- Fri Nov 16, 2018 9:29 am
- Forum: The GAM
- Topic: November Gales
- Replies: 21
- Views: 11952
Re: November Gales
Yes, [an atmospheric pressure of 979 mBar] is [interesting]. On the Dvorak Intensity Chart, 978 mBar pressure in the Atlantic would be a Saffir-Simpson Category-1 hurricane or a Category-2 hurricane, depending on wind speed: 64 to 83 Knots is Category-1; 84 to 96 knots is Category-2. With the wind s...
- Tue Nov 13, 2018 9:51 am
- Forum: The GAM
- Topic: 190 Montauk Outriggers
- Replies: 4
- Views: 3629
Re: 190 Montauk Outriggers
The most difficult part will be having someone weld the extrusion plate onto your T-Top.
http://tacomarine.com/product/GS-280/Gr ... -Top-Mount
https://www.youtube.com/watch?v=rM697WNiP4E
http://tacomarine.com/product/GS-280/Gr ... -Top-Mount
https://www.youtube.com/watch?v=rM697WNiP4E
- Fri Nov 09, 2018 9:14 pm
- Forum: The GAM
- Topic: 130 SUPER SPORT 2019
- Replies: 17
- Views: 11494
Re: 130 SUPER SPORT 2019
I found interesting how many seating options there are and all are dealer installed. After finishing your build and going to the summary page, there is a notice that "Dealer installed options may require additional freight and installation charges." The stainless steel steering wheel is al...
- Wed Nov 07, 2018 7:36 am
- Forum: The GAM
- Topic: Range of Discount on New 150 MONTAUK
- Replies: 6
- Views: 4553
Re: Range of Discount on New 150 MONTAUK
I don't believe there are any general rules on discounting off the MSRP of Boston Whaler boats. As you noted there are a variables that can affect your ability to get a discount. - Time of year you are purchasing in a specific market - Dealer's on-site inventory - What type of dealer you are working...
- Fri Nov 02, 2018 7:10 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Filling Console Cut-outs
- Replies: 6
- Views: 5771
Re: Filing console cut outs
I can't tell the size of your cut-outs but another choice could be to have Boat Outfitters custom build a small glove box. Minimum dimensions are 6-inch-H x 8-inch-W. If your cut-outs are too small it looks like you might be able to enlarge your port side opening to meet the minimum. I have used Boa...
- Thu Nov 01, 2018 7:57 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Keeping Dashboard Panel and Gauges Watertight
- Replies: 16
- Views: 10547
Re: Keeping Dashboard Panel and Gauges Watertight
Jim - The 170 Montauk's console panel is not made from metal. Is is a plastic panel. The plastic panel does not have the same structural properties of the older metal panels used in classic Boston Whaler boats. One of the concerns with this specific plastic panel is that the two lower corner screws ...
- Mon Oct 29, 2018 9:55 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Keeping Dashboard Panel and Gauges Watertight
- Replies: 16
- Views: 10547
Re: Keeping Dashboard Panel and Gauges Watertight
I have a 2005 170 Montauk, same panel as your 2007 170 Montauk, and the plastic console panel is just screwed to the console, there is no sealant from the factory on the panel. I didn't use sealant around the entire panel. I thought using sealant around the entire panel would make removing the panel...
- Sat Oct 27, 2018 8:23 pm
- Forum: The GAM
- Topic: 2016 Montauk 210 Locker: Six Questions
- Replies: 2
- Views: 2750
Re: 2016 Montauk 210 Locker: Six Questions
I have a 2016 210 Montauk; my answers are below; Q1: Is the anchor locker continuously wet and has mildew? My anchor locker stays fairly dry, I do wash down my archor in the locker and leave the cover open until dry. Any water that enters the front opening for the rode flows down to the drain. I do ...
- Mon Oct 08, 2018 8:36 am
- Forum: The GAM
- Topic: Montauk Mooring
- Replies: 9
- Views: 6353
Re: Montauk Mooring
For a helix anchor as described by Jim, does anyone have experience on what the life expectancy would be in Florida's warm coastal waters?
- Fri Aug 24, 2018 6:29 am
- Forum: The GAM
- Topic: PURSUIT to be sold to MALIBU for $100-million
- Replies: 5
- Views: 4654
Re: PURSUIT to be sold to MALIBU for $100-million
The Capital Markets like this deal. Malibu has $433M in revenue, Pursuit will add another $125M, making Malibu's annualized revenue about $550M. Malibu's stock (MBUU) jumped up nicely on the news, and their stock has been upgraded to a buy with 15% growth target to $51 a share. They are a very passi...
- Tue Aug 21, 2018 7:52 pm
- Forum: The GAM
- Topic: Large-HP Outboard Backorders
- Replies: 14
- Views: 9069
Re: Large-HP Outboard Backorders
[The duration and engine speed allowed before flywheel replacement should be done in the Yamaha F350 engine is said to be] 80 hours in the 3500 to 4200-RPM range. Yamaha will replace the flywheel and ECU. The new ECU will now record the time in that RPM range and will give the owner a warning when i...
Re: Tow arch
I have the factory tow arch on my 210 Montauk - I think the biggest concern with a putting a tow arch on a classic Montauk is that there will be no place with backing to bolt the tow arch to the deck. I think a turboswing is also the best option. This turboswing status update was just posted: http:/...
- Mon Jul 30, 2018 11:04 pm
- Forum: The GAM
- Topic: 2017 to 2019 Boston Whaler Boats with Self-bailing Cockpits
- Replies: 10
- Views: 8561
Re: 2017 to 2019 Boston Whaler Boats with Self-bailing Cockpits
My 210 Montauk is "self bailing", but as noted by Jefecinco as on his 190 Montauk, my 210 Montauk will accumulated a good amount of rain water in the bilge and the bilge pump will drain the battery dead. I keep my 210 Montauk on a lift with the garboard drain plug removed.
- Wed Jul 25, 2018 1:45 pm
- Forum: The GAM
- Topic: FL Keys Hotels, Marinas and Boat Ramps
- Replies: 2
- Views: 3116
FL Keys Hotels, Marinas and Boat Ramps
I am thinking about taking my 210 Montauk to the FL keys for a few days in September. Any recommendations on the best Key to stay at for fishing? I am hoping to find a hotel that allows trailers and boats, possibly a marina near by where I could keep the boat in the water or a near by ramp for daily...
- Tue Jul 17, 2018 11:41 pm
- Forum: The GAM
- Topic: Boating Newbie
- Replies: 15
- Views: 8716
Re: Boating Newbie
Echo - Welcome to the forum! and enjoy your boat buying experience. There is a large difference between a 170 Montauk and 210 Montauk and a 230 Outrage from price to size and weight. Is your budget that flexible? A new 170 Montauk is around ~35k and a 230 Outrage about ~120k. A 230 Outrage can weigh...
- Mon Jun 11, 2018 1:24 pm
- Forum: The GAM
- Topic: Chris-Craft Sold to Winnebago
- Replies: 10
- Views: 7022
Re: Chris-Craft Sold to Winnebago
Winnebago is not a large company: 2017 revenue was $1,500-million and net income of $71.3-million. Chris-Craft has some models that are over $1-million. It will be interesting to see if the purchase price gets published. There was another interesting deal as Polaris Industries Inc., also said it wou...
- Sat May 12, 2018 6:43 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 210 Montauk Trailer Adjustment
- Replies: 17
- Views: 11880
Re: 210 Montauk Trailer Adjustment
Taking Jim's advise; I proceeded to get my boat & trailer weighted. The complete rig weight was certified at 4,970-lbs. I tested the accuracy of the Sherline LM 1000 Trailer Tongue Weight Scale that I noted in thread: http://continuouswave.com/forum/viewtopic.php?f=6&t=3381 The scale has spo...
- Thu May 10, 2018 8:20 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Hitch Ball with a Built-in Scale
- Replies: 3
- Views: 3505
Re: Hitch Ball with a Built-in Scale
I decided to get a Sherline LM 1000 - Trailer Tongue Weight Scale - 1000LB. The cost was $159.00
- Thu May 10, 2018 8:16 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 210 Montauk Trailer Adjustment
- Replies: 17
- Views: 11880
Re: 210 Montauk Trailer Adjustment
Interesting enough, today I received Boston Whaler Service Bulletin #BW#17-027: "Your 2018 210MT is involved in a service campaign to verify the winch/roller stand position." "Dear Customer: Boston Whaler, in conjunction with Karavan Trailers, has determined the some 210MT winch/rolle...
- Mon May 07, 2018 3:41 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Hitch Ball with a Built-in Scale
- Replies: 3
- Views: 3505
Hitch Ball with a Built-in Scale
I am getting ready to tow my 210 Montauk to Florida at the end of next week, and in this previous post had a discussion about the trailer sway I was encountering: http://continuouswave.com/forum/viewtopic.php?f=6&t=3081&p=17648 Has anyone used the Weigh Safe Hitch Ball with a built in scale ...
- Sat Apr 21, 2018 9:04 am
- Forum: The GAM
- Topic: 2016 170 Montauk Trailer Guide Bunks
- Replies: 7
- Views: 5303
Re: 2016 Montauk 170
Congratulations! Very nice price for a great boat! Good luck with her.
- Fri Apr 20, 2018 10:09 am
- Forum: The GAM
- Topic: 170 Montauk: Remove rails and center console for shipping via container
- Replies: 7
- Views: 5232
Re: 170 Montauk: Remove rails and center console for shipping via container
Standard ISO 40 foot shipping container dimensions: - Container interior width: 7’8’’ (2.337 m) - Container interior height: 7’10’’ (2.388 m) - Container interior length: 39’5’’ (12.014 m) - Container door width: 7’8’’ (2.337 m) - Container door height: 7’6’’ (2.286 m) Owning a 170 on a trailer, Jim...
- Wed Apr 18, 2018 5:36 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2003 170 Montauk: Replacement part for sump cover plastic door catch
- Replies: 5
- Views: 4717
Re: 2003 170 Montauk Replacement part for sump cover plastic door catch
Tim - unfortunately that part does not carry its own part number. As you can see the factory parts listing and diagram show it as part of the cover assembly. cover.JPG The cover is line number 15: list.JPG You should call Boston Whaler Customer Service at 1-877-294-5645 and ask for the manufacture o...
- Tue Apr 17, 2018 1:13 am
- Forum: The GAM
- Topic: Exact Location of Console Cutout for 2018 150 MONTAUK
- Replies: 3
- Views: 3447
Re: Exact Location of Console Cutout for 2018 150 MONTAUK
Here is a pretty good image of the factory mounted electronic package on the 2018 150 Montauk: 2018 150 Montauk Console.jpg Mounting the Raymarine Axiom 7 DV in the console should not be that difficult, I understand your desire to exactly duplicate the factory mounting location, but you should test ...
- Mon Apr 16, 2018 11:01 pm
- Forum: MARKETPLACE
- Topic: Propellers for Sale
- Replies: 3
- Views: 3278
Re: Propellers for Sale
Rich - your asking prices are very reasonable. I have had excellent results selling used propellers on ebay, a good description with front, back and blade pictures of the prop usually sells a nice propeller quickly.
- Thu Apr 05, 2018 9:27 am
- Forum: The GAM
- Topic: 150 SPORT Trailer
- Replies: 12
- Views: 7208
Re: 150 SPORT Trailer
As stated above the price difference will be minimal, between a 1,250lb and 1,500lb capacity trailer. Do you have any other factors that need to be taken into consideration? Like the length of the trailer? Karvan makes two models of a 1,250-lbs capacity spring suspension bunk boat trailer: KB-1250-5...