CONTINUOUSWAVE

Do the boat weights in the specification sheets include the rigging. I weighed my Revenge 20 W-T. My best guess it weighs 2,560 lbs, and 410-lbs over empty weight. In the winter of 2017-2018, I drilled a 1/4-inch hole in the keel of the Revenge 20 W-T to check for water—not a drop in four months in ...

Thanks jimh . You answered my question.

I was asking if they [Boston Whaler] rated them [Boston Whaler boats] by horsepower or weight.

According to the specifications, a 1987 Revenge 20 W-T is 20' 3" long so it should be exempt from the 20' and under rule.

[Note: thread moved to PERFORMANCE forum for discussion. Initial question has been rewritten to be a direct question instead of a survey asking for the number of people that knew the answer to the question—jimh] Why [that is, for what reason or due to what element of the design] is the Revenge 20 Wh...

I left the engine throttle [for a 1996 Evinrude Ocean Pro] at wide open for a week after checking compressions. Now [the throttle] is stuck and the culprit is the timing base plate. How freely should the timing base plate move with the engine not running?

Any tips on repairs?

Thanks Phil

On my REVENGE with a 1996 Evinrude 200 I winterize as follows: --drain all the gasoline --run the 200 and Honda 15-HP until they quit --add 5-gallon of aviation gasoline 100ll to the tank (Aviation gasoline does not break down like auto fuel and does not produce varnish) --run both engines --do fogg...

I don't plan on making my box's that big. I want to be able to swivel the seats around and not loose so much deck space. When I start the project I will post pics ( as soon as I learn how to. I am new to the site. I'm a lot better with a wrench than computers) I have my oil tank behind the pilot sea...

Good idea thanks. I would only need one hole in the top plus that would solve the problem of a good structural attachment to the deck. the box will be over the center deck panel so they need to be removable to access the fuel tank. If I go that route I will probably just make some molds so I can mak...

Thanks for the input. I will keep the butcher knife away from my deck.
I have worked on composite aircraft so I plan on using foam and glass. That way it would be easy to shape them to make them look oem.

I agree. I'm now thinking of building some seat [boxes] for more storage

I have a 20 Revenge I plan on replacing my upholstery my self. I found an old walking foot sewing machine and started to practice.
Check out Sailrite.com They have a lot of great videos' for marine upholstery work

I would like to install a fish box on either side of the fuel tank on a 1987 REVENGE 20 W-T. By looking at pictures of the hull with center deck cover removed, I don't think it would be a good idea fo just cut a hole, dig out the foam. and glass-in [the new live well] without knowing where to cut. H...