Search found 14 matches
- Wed Oct 24, 2018 10:56 am
- Forum: MARKETPLACE
- Topic: FS: 1999 OUTRAGE 17 in Rhode Island, $20,000
- Replies: 0
- Views: 4012
FS: 1999 OUTRAGE 17 in Rhode Island, $20,000
1999-Outrage-17a.jpg FOR SALE: a 1999 Outrage 17, 2018 E-TEC 150, 2017 Karavan trailer, new 56-gallon fuel tank. Oil tank moved under center console. 2017 Garmin GPS chartplotter. Horn added 2018. Bottom was painted 2018. $20,000. Need a bigger boat for Rhode Island Sound fishing. email: todd@insct...
- Mon Jun 11, 2018 10:11 am
- Forum: MARKETPLACE
- Topic: WTB: 18 pitch propeller for E-TEC 150
- Replies: 0
- Views: 2748
WTB: 18 pitch propeller for E-TEC 150
Wanted to buy: an 18-pitch right-hand rotation propeller for E-TEC150. My [boat’s] bottom must be getting dirty because engine speed is down 300-RPM with the 19 pitch Viper that I have now.
- Fri May 11, 2018 9:55 am
- Forum: The GAM
- Topic: Rinsing Fuel Tank Top
- Replies: 15
- Views: 8734
Re: Rinsing Fuel Tank Top
[In reply to the implicit question about what models of Boston Whaler boats in what years had fuel tanks from what materials]: my 1999 Outrage 17 had an aluminum tank. I just replaced the aluminum tank.
- Fri May 11, 2018 9:50 am
- Forum: PERFORMANCE
- Topic: 1999 Outrage 17
- Replies: 5
- Views: 4994
Re: 1999 Outrage 17
the picture file is too large to attach.
- Thu May 10, 2018 1:59 pm
- Forum: PERFORMANCE
- Topic: 1999 Outrage 17
- Replies: 5
- Views: 4994
Re: 1999 Outrage 17
rpm range is 4850-5850 on this engine according to the owners manual. The anti-ventilation plate isn't above the water.
- Thu May 10, 2018 9:47 am
- Forum: PERFORMANCE
- Topic: 1999 Outrage 17
- Replies: 5
- Views: 4994
1999 Outrage 17
Got the Viper prop changed to a 19 pitch on the Gen 1 E-tec 150 and ran it last night. Got 48.9 mph against the wind and 50.5 mph with the wind. Wide open RPMs were between 5500 and 5700. The boat didn't porpoise. It porpoised before with the 17 pitch Viper prop and was at the max rpms. It only went...
- Wed Apr 25, 2018 10:48 am
- Forum: PERFORMANCE
- Topic: 1999 OUTRAGE 17 with E-TEC 150: First Ride
- Replies: 10
- Views: 7166
Re: 1999 OUTRAGE 17 with E-TEC 150: First Ride
The engine is mounted three-holes-up. I have used the boat once then brought it back to the dealer to get the bottom painted and have the propeller sorted out. My wife wasn't comfortable moving around the boat while it was on plane. I will let her drive and take a picture when I get the boat back. T...
- Mon Apr 23, 2018 1:23 pm
- Forum: PERFORMANCE
- Topic: 1999 OUTRAGE 17 with E-TEC 150: First Ride
- Replies: 10
- Views: 7166
Re: 1999 OUTRAGE 17 with E-TEC 150: First Ride
[The engine under discussion is a legacy] E-TEC 150 mounted in the [ambiguous description--again, please use the recommended method to describe engine mounting height--jimh]. There are three holes above it now.
I will try a higher pitch propeller. I appreciate any and all comments. Thank you
I will try a higher pitch propeller. I appreciate any and all comments. Thank you
- Mon Apr 23, 2018 10:04 am
- Forum: PERFORMANCE
- Topic: 1999 OUTRAGE 17 with E-TEC 150: First Ride
- Replies: 10
- Views: 7166
1999 OUTRAGE 17 with E-TEC 150: First Ride
An E-TEC 150 on 1999 Outrage 17 is mounted all-the-way-up [possibly means mounted three-holes-up from the lowest position--jimh] and has a Viper 17-pitch propeller. The bottom of the OUTRAGE 17 is painted. Aboard were 35-gallons of fuel, my wife, and I; a total crew weight of 300-lbs. The E-TEC acce...
- Mon Jan 29, 2018 3:24 pm
- Forum: PERFORMANCE
- Topic: 1999 Outrage 17, 150-HP
- Replies: 11
- Views: 8056
Re: 1999 Outrage 17, 150-HP
I noticed [repeated oscillation of the bow] with the old engine. I was hoping to pick a stern-lifting propeller for the new [legacy E-TEC] 150 .
- Fri Jan 26, 2018 12:33 pm
- Forum: PERFORMANCE
- Topic: 1999 Outrage 17, 150-HP
- Replies: 11
- Views: 8056
Re: 1999 Outrage 17, 150-HP
The [1999 OUTRAGE 17] boat was empty except for a 12-gallon fuel tank under the RPS. The new [E-TEC 150-HP legacy engine] is 15 or 20-lbs lighter [than a previous engine] so that should help a bit--plus I replacing the inboard fuel tank.
- Thu Jan 25, 2018 10:59 am
- Forum: PERFORMANCE
- Topic: 1999 Outrage 17, 150-HP
- Replies: 11
- Views: 8056
Re: 1999 Outrage 17, 150-HP E-Tek G 1
The engine isn't bouncing, the boat is. [The engine is a] 2017 [E-TEC] 150 G1. [I am ] not sure of the gear ratio. The engine is being mounted today. I asked for it to be mounted as high as possible. I never got to hit the maximum speed because the boat would [go into repeated up and down oscillatio...
- Wed Jan 24, 2018 11:24 am
- Forum: PERFORMANCE
- Topic: 1999 Outrage 17, 150-HP
- Replies: 11
- Views: 8056
Re: prop help for new E-Tek 150 on 1999 Outrage 17
[The] propeller on the 135 was a 19-pitch MIRAGEplus, [and the engine was] mounted two-holes-up.
Thank you for the input. Many thanks.
I am most interested in stopping the bouncing when I trim the motor.
Thank you for the input. Many thanks.
I am most interested in stopping the bouncing when I trim the motor.
- Tue Jan 23, 2018 3:35 pm
- Forum: PERFORMANCE
- Topic: 1999 Outrage 17, 150-HP
- Replies: 11
- Views: 8056
1999 Outrage 17, 150-HP
The dealer is saying [the propeller pitch that is appropriate for a new E-TEC 150 should be a 17-pitch, but [the 1999 OUTRAGE 17] had a 19 pitch [when it was powered by] a [Mercury 135-HP OptiMax].
[I am wondering] if Tom Clark or another expert would give their opinion?
[I am wondering] if Tom Clark or another expert would give their opinion?