Search found 132 matches
- Tue Apr 02, 2024 10:40 am
- Forum: The GAM
- Topic: 2018 270 DAUNTLESS Pump Runs Continually
- Replies: 2
- Views: 559
Re: 2018 270 DAUNTLESS Pump Runs Continually
If your bilge pump has a float switch to turn on the pump it may be stuck in the on position.
- Sat Mar 16, 2024 7:02 pm
- Forum: PERFORMANCE
- Topic: 1984 OUTRAGE V-20 Re-power
- Replies: 4
- Views: 463
Re: 1984 OUTRAGE V-20 Re-power
Your 1984 boat was rated for a maximum of 180 HP so I think you could drop way down from what you have now.
- Mon Jan 08, 2024 6:53 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2001 DAUNTLESS 16: Adding Bow Mounted Trolling Motor
- Replies: 11
- Views: 1423
Re: 2001 DAUNTLESS 16: Adding Bow Mounted Trolling Motor
On my 1987 Montauk [17] I used the 9-inch shuttle slide—but your bow may be slightly different.MarkCz wrote:Q3: Is there a particular size [ShuttleSide] that you would recommend?
- Mon Dec 25, 2023 1:47 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1985 MONTAUK 17: Preventing Water Overflowing Transom
- Replies: 7
- Views: 1035
Re: 1985 MONTAUK 17: Preventing Water Overflowing Transom
[A commercial product website about "custom made splash guards" to prevent water overflowing the transom is:]
https://wavewackers.com/
https://wavewackers.com/
- Fri Dec 15, 2023 9:28 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1985 MONTAUK 17: Preventing Water Overflowing Transom
- Replies: 7
- Views: 1035
Re: 1985 MONTAUK 17: Preventing Water Overflowing Transom
You may want to search for the words: back trolling transom splash guards. Walleye fisherman often backtroll to go slow and have fabricated some devices to minimize water ingress while still allowing water egress.
- Wed Dec 13, 2023 5:29 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1985 MONTAUK 17: Preventing Water Overflowing Transom
- Replies: 7
- Views: 1035
Re: 1985 MONTAUK 17: Preventing Water Overflowing Transom
I have a similar vintage Montauk 17 and on a few occasions wish I had some kind of spring loaded flap on each side of the motor to keep water from entering over the transom notch. I never got around to building the thing, but I wanted a sort of one-way-flap that if need be would open if I took on lo...
- Sat Nov 04, 2023 6:40 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1987 MONTAUK 17 Trolling Motor Installation Illustrated
- Replies: 4
- Views: 2158
Re: 1987 MONTAUK 17 Trolling Motor Installation Illustrated
Q2: why not three holes and three bolts...? I probably could have used only three bolts. Q3: what made you feel comfortable drilling holes in the hull? Drilling the first hole is the most painful. Q4: is there anything that you would change or do differently? Were I to do this again I would use G10...
- Fri Nov 03, 2023 10:24 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2001 DAUNTLESS 16: Adding Bow Mounted Trolling Motor
- Replies: 11
- Views: 1423
Re: 2001 DAUNTLESS 16: Adding Bow Mounted Trolling Motor
ShuttleSlide makes a large range of sliding trolling motor mounts in various lengths. I love the ShuttleSlide sliding trolling motor mount on my 1987 MONTAUK. It keeps the trolling motor inside the rub rail, unless it's deployed. I also thought I was going to have to [install a] hinge the [1987 MONT...
- Fri Aug 18, 2023 10:35 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1996 Montauk 17 Hatch Hinge Repair
- Replies: 13
- Views: 3065
Re: 1996 Montauk 17 Hatch Hinge Repair
Apex fasteners makes a line of high quality 316 stainless steel sex nuts or barrel nuts in many different lengths and thread sizes. 316 would hold up better than 304 stainless with respect to corrosion. If you add a backing plate make sure the added thickness of the barrel nuts plus backing plate on...
- Thu Aug 17, 2023 10:28 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Engine Water Pressure Drops with Engine Speed Increase
- Replies: 16
- Views: 8773
Re: Engine Water Pressure Drops with Engine Speed Increase
I am assuming your running the engine in the water and not on a set of clamp on water muffs when you are running at 3000 rpms. I suggest removing the engine cowl and take the boat for a ride and either use an infrared temperature gauge or even your hand to see how hot the engine is getting.
- Mon Aug 07, 2023 5:29 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1996 Montauk 17 Hatch Hinge Repair
- Replies: 13
- Views: 3065
Re: 1996 Montauk 17 Hatch Hinge Repair
I would not use an impact driver with stainless steel. I did that and severely galled some screws to the point where they were impossible to remove. I learned from that mistake.
- Sun Aug 06, 2023 8:12 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1996 Montauk 17 Hatch Hinge Repair
- Replies: 13
- Views: 3065
Re: 1996 Montauk 17 Hatch Hinge Repair
You mention the screws on the bottom are not connected to the screws on the top which I find hard to believe as the location and spacing seem identical to to the screw location on the other side. What happens when you try to loosen the screws that are on the underside of the hatch? Just looking at t...
- Thu Jul 27, 2023 9:55 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Cutting Unibond Hull in Half to Add Length
- Replies: 5
- Views: 2228
Re: Cutting Unibond Hull in Half to Add Length
I think you would be better off selling the heavy motor and finding an older used 2 stroke power cycle engine as opposed to your plan. The resale value of your lengthening project would suffer compared to an original hull.
- Sat Jul 22, 2023 12:10 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1961 Sport 13Transom Reinforcement
- Replies: 9
- Views: 3425
Re: 1961 Sport 13Transom Reinforcement
Very nice job on the fabrication and I am sure that will absorb some of the stresses on the transom caused by the extra leverage of the 5 inch set back of the jackplate. I assume you are next going to through bolt the other side of the plate similar to what you did for the transom side?
- Mon Jul 17, 2023 2:36 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Mercury 90-HP Starting Problems
- Replies: 3
- Views: 2304
Re: Mercury 90-HP Starting Problems
I have a 1987 70-HP three-cylinder two-stroke-power-cycle engine that exhibited similar problems a few years ago. I also noted oil in the water around the engine. I replaced the engine's fuel pump and [my boat's fuel supply line] check valve: that fixed the problem, without great expense. A fuel pum...
- Sun Jun 25, 2023 9:33 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: MONTAUK 17 Console Rod Holder Installation
- Replies: 3
- Views: 1995
Re: MONTAUK 17 Console Rod Holder Installation
On my 1987 Montauk the top of the horizontal teak part of the rod holder assembly is almost touching the lower edge of the windshield.
- Sun Jun 11, 2023 9:11 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1981 Montauk 17 Battery Installation
- Replies: 10
- Views: 2451
Re: 1981 Montauk 17 Battery Installation
You can make an adjustable thickness support out of a 4 x 4 cut into wedge shapes like a giant pair of door stoppers. The individual pieces will fit in the lower kick space and if you then align and stack them you can slide their inclined-plane faces together; the thickness will increase and you can...
- Tue May 30, 2023 4:14 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1998 Mercury 135XL dies at idle speed
- Replies: 2
- Views: 2394
Re: 1998 Mercury 135XL dies at idle speed
How old is the gasoline fuel in the fuel tank?
- Fri May 26, 2023 4:00 pm
- Forum: The GAM
- Topic: 1987 Outrage 18
- Replies: 16
- Views: 4137
Re: 1987 Outrage 18
The after cleaning pictures look amazing. It's hard to believe it's the same boat.
- Fri May 05, 2023 8:38 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1982 STRIPER 15 Seat Modification
- Replies: 5
- Views: 934
Re: 1982 STRIPER 15 Seat Modification
My boat was in so-so condition so I drilled the holes. The added comfort the padded seats provide eases the pain of drilling that first hole.
- Fri May 05, 2023 9:06 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1982 STRIPER 15 Seat Modification
- Replies: 5
- Views: 934
Re: 1982 STRIPER 15 Seat Modification
To make a new thwart seat use something similar to a solid wood butcher block wood [linked below] that is thick. A rabbit may have to be cute on the plank ends so the thicker material will fit into the side rail notches that hold the thwart seats down. You can stain and varnish to match your existin...
- Wed Mar 15, 2023 7:11 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2007 150 MONTAUK Wire Chase Location Between Bow and Console
- Replies: 6
- Views: 1076
Re: 2007 150 MONTAUK Wire Chase Location Between Bow and Console
Use silicone coated marine wire. Silicon coated marine wire is flexible and lays flat on the floor.Gpettinaro wrote:....an extension cord running from the [trolling motor] to the console...creates a trip hazard while in use.
- Wed Feb 22, 2023 9:10 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Mercury 40-HP: Remedy for very stiff steering
- Replies: 10
- Views: 3140
Re: Mercury 40-HP: Remedy for very stiff steering
My 1987 70 HP Mercury outboard has grease zerks on both the tilt tube and the pivot tube.
- Sun Feb 19, 2023 6:17 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Transom Engine Mounting Holes 1985 MONTAUK 17
- Replies: 5
- Views: 1014
Re: Transom Engine Mounting Holes 1985 MONTAUK 17
This has some information from the forum regarding mounting outboards https://continuouswave.com/ubb/Forum4/HTML/007774.html
- Sat Feb 18, 2023 10:11 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Transom Engine Mounting Holes 1985 MONTAUK 17
- Replies: 5
- Views: 1014
Re: Transom Engine Mounting Holes 1985 MONTAUK 17
I have a 1987 Boston whaler 17 ft Montauk with a 1987 mercury 70 HP 2 stroke power cycle engine and all four engine mounting bolts go through the transom and are visible inside the boat. My engine was originally mounted resting directly on the transom but I was able to raise the engine 2 holes up. A...
- Tue Jan 10, 2023 11:04 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 190 Outrage Trolling Motor Installation
- Replies: 22
- Views: 4656
Re: 190 Outrage Trolling Motor Installation
The batteries I bought were made by Chins. [Moderator’s note: this thread is now closed. If others want to solicit advice on similar projects, please start a new thread, giving explicit details about you new project. A year has passed without comment from the thread originator regarding his plans to...
- Sun Jan 08, 2023 4:10 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 190 Outrage Trolling Motor Installation
- Replies: 22
- Views: 4656
Re: 190 Outrage Trolling Motor Installation
The 100-Ampere-hour LiFePO4 batteries I bought on Amazon from Chins weigh 24.5-lbs and now cost only $300. Their build quality was good according to Will Prowse. I do not charge them with my outboard. I bought a two bank charger that has a Lithium setting. I was willing to take the gamble on the Chi...
- Sat Jan 07, 2023 2:07 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 190 Outrage Trolling Motor Installation
- Replies: 22
- Views: 4656
Re: 190 Outrage Trolling Motor Installation
On Amazon you can buy a 100-Ampere-hour LiFePO4 12-Volt battery that weighs 24-lbs for $300. Two of those batteries could be placed in a cooler, using plywood cut to fit the bottom inside of the cooler to spread the load. Add a connector on the cooler to plug-in the trolling motor. With decent hold ...
- Thu Jan 05, 2023 4:49 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 190 Outrage Trolling Motor Installation
- Replies: 22
- Views: 4656
Re: 190 Outrage Trolling Motor Installation
The anchor locker in the front of the boat would cause the batteries to be subject to more pounding from the boat encountering waves and wakes compared to batteries located further aft.
- Tue Dec 27, 2022 11:17 am
- Forum: The GAM
- Topic: Source to Buy Lead
- Replies: 19
- Views: 3499
Re: Source to Buy Lead
I see Amazon sells a 50 pound bag of steel shot listed as a wake boat bag for $69. It did say free shipping which surprised me. https://www.amazon.com/BALLASTExtra-Lb-Weight-Wakesurf-Surfing-Warranty/dp/B01LI2HK9W/ref=asc_df_B01LI2HK9W/?tag=hyprod-20&linkCode=df0&hvadid=312134475503&hvpo...
- Fri Dec 23, 2022 10:08 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2014 170 MONTAUK: Fuel Hose Route with 22-gallon Tank
- Replies: 19
- Views: 3263
Re: 2014 170 MONTAUK: Fuel Hose Route with 22-gallon Tank
I also used foam for my 1987 Montauk 17 boat to fill the space between the top of a new fuel tank and the RPS seat bottom to prevent shifting. After three years I have had no concerns about the tank shifting.
- Fri Dec 23, 2022 10:39 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Sources for Center Console and Reversible Pilot Seat
- Replies: 4
- Views: 1165
Re: Sources for Center Console and Reversible Pilot Seat
The price at specialty marine with a windshield and the grab rail with the teak doors is over $2900. You can select the options you want.
- Sat Dec 10, 2022 6:10 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: MONTAUK 17 RPS Placement
- Replies: 7
- Views: 1318
Re: MONTAUK 17 RPS Placement
I have a 1987 Montauk. The front of the RPS base is located 17.75 inches back from the rear of the center console. That should get you close.
- Thu Dec 08, 2022 3:21 pm
- Forum: The GAM
- Topic: Advice for Using Front-mounted Hitch on Tow Vehicle
- Replies: 9
- Views: 3439
Re: Advice for Using Front-mounted Hitch on Tow Vehicle
What kind of advice do you want? I know this may sound obvious but if you want the trailer to move to the right steer left initially to get the turn started.
- Fri Nov 11, 2022 8:02 am
- Forum: The GAM
- Topic: Boston Whaler SPORT 13 Bow Hatch Alternative
- Replies: 7
- Views: 1534
Re: Boston Whaler SPORT 13 Bow Hatch Alternative
I made a replacement hatch for my c.1970 13-footer with a solid piece of varnished teak board. The varnished teak hatch board looked great.
I have always thought the hatch should have been a teak plank as used for the thwart seats and not from plywood.
I have always thought the hatch should have been a teak plank as used for the thwart seats and not from plywood.
- Tue Oct 18, 2022 12:47 pm
- Forum: The GAM
- Topic: Fire Extinguisher Requirements
- Replies: 5
- Views: 1484
Re: Fire Extinguisher Requirements
If someone has the actual dimensions of the 10 -B-C Jim mentioned above I would appreciate it. I have a 1987 Boston Whaler Montauk with the recessed wood fire extinguisher cabinet on the port side of the console and would like to find the largest extinguisher that will fit in that cabinet.
- Tue Sep 27, 2022 9:31 am
- Forum: The GAM
- Topic: A Boat for Lake Conroe in Texas and for a Garage
- Replies: 7
- Views: 3382
Re: Garage Fit
I am able to fit a 1987 Montauk 17 into my garage which is only 19-feet 10-inches. I replaced the stock trailer winch post and added a hinge to the trailer tongue. I have to store it in the garage with the engine down to save space.
- Fri Sep 16, 2022 7:46 pm
- Forum: PERFORMANCE
- Topic: 1964 NAUSET 16 Engine Weight
- Replies: 18
- Views: 5907
Re: 1964 NAUSET 16 Engine Weight
When I was age 15 we used to ski behind a 16-foot-boat with an 18-HP stroke-power-cycle-engine with two people in the boat and one on skis. We each weighed 150-lbs.
- Tue Jul 19, 2022 9:30 am
- Forum: The GAM
- Topic: Specialty Marine Reviews
- Replies: 4
- Views: 2060
Specialty Marine Reviews
Specialty Marine sells many interior wood kits for older Boston Whalers that come prefinished.
- Tue Jul 19, 2022 9:21 am
- Forum: The GAM
- Topic: Current Prices for Older 13-footers
- Replies: 2
- Views: 1209
Re: Current Prices for Older 13-footers
In 2017 I sold my 1970' 13-footer with an Evinrude 20-HP engine on a trailer for $2,500.
I then bought a nice 1987 MONTAUK 17 with a 1987 Mercury 70-HP engine for $3,500.
I am glad I was able to upgrade in 2017. Prices have gone up very high in the last few years.
I then bought a nice 1987 MONTAUK 17 with a 1987 Mercury 70-HP engine for $3,500.
I am glad I was able to upgrade in 2017. Prices have gone up very high in the last few years.
- Mon Jul 04, 2022 8:48 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1987 MONTAUK 17 Trolling Motor Installation Illustrated
- Replies: 4
- Views: 2158
1987 MONTAUK 17 Trolling Motor Installation Illustrated
I show how I mounted a trolling motor to the bow on my 1987 MONTAUK in Figures 1, 2, and 3. I could not through-bolt the trolling motor mount to the deck. Instead, I made a plate out of High Density PolyEthylene (HDPE) that is 1/2-inch thick and cut in a shape that matches the Starboard corner of my...
- Mon Jun 27, 2022 3:49 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Mounting Trolling Motor on Side of Bow
- Replies: 6
- Views: 2193
Re: Mounting Trolling Motor on Side of Bow
My 1987 MONTAUK 17 and your OUTRAGE are different boats, but some of what I did may work for your OUTRAGE. My installation is not pretty but it is sturdy and works. See: 1987 MONTAUK 17 Trolling Motor Installation Illustrated https://continuouswave.com/forum/viewtopic.php?f=6&t=7293&p=42609#...
- Sat Jun 25, 2022 4:24 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Mounting Trolling Motor on Side of Bow
- Replies: 6
- Views: 2193
Re: Mounting Trolling Motor on Side of Bow
Do you have access to be able to add a backing plate and washers and nuts under the area where you would like to mount the trolling motor on the bow?
If you have access to through bolt the mount I would do that.
If you have access to through bolt the mount I would do that.
- Tue Jun 21, 2022 12:53 pm
- Forum: MARKETPLACE
- Topic: FS: Trolling Motor and accessories, $1,000 in Massachusetts
- Replies: 2
- Views: 1716
Re: FS: Trolling Motor and accessories, $1,000 in Massachusetts
That's a great price and wish you posted this a month ago.
- Thu Jun 09, 2022 12:04 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2000 Johnson 90-HP Drain Fitting
- Replies: 5
- Views: 1876
Re: 2000 Johnson 90-HP Drain Fitting
A description of where the fitting is located or a picture would be a huge help for us to suggest what it connects to. If the fitting is small for a 1/8-inch ID tubing and on the forward facing part of the lower unit it may be the attachment point for the speed sensor tubing which runs to the helm s...
- Thu May 26, 2022 12:50 pm
- Forum: The GAM
- Topic: 1985 Montauk 17: Splash Well has Access Plate
- Replies: 21
- Views: 3062
Re: 1985 Montauk 17: Splash Well has Access Plate
I have a 1987 Montauk. There is no access plate in the splash well.
There is a rectangular teak cover in front of the splash well that covers the cockpit sump.
There is a rectangular teak cover in front of the splash well that covers the cockpit sump.
- Fri May 20, 2022 2:50 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1987 OUTRAGE 18: Fuel Tank Location Below Deck
- Replies: 2
- Views: 632
Re: Alternative Idea
An idea that avoids drilling any new holes in the deck of the OUTRAGE 18: ⋅ fabricate a 3/4-inch-thick piece of KING StarBoard, sized a little larger than the base of the leaning post ⋅ position the new plate underneath the new leaning post ⋅ fasten the new leaning post...
- Tue May 03, 2022 12:00 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Adding New Mechanical Steering to Custom 13-footer
- Replies: 14
- Views: 3749
Re: 13-footer: Change to Cable Steering from Wire Rope
I had an early 1970's 13-footer with wire rope and pulley steering system. I never had a problem with the steering system.
- Tue May 03, 2022 11:49 am
- Forum: The GAM
- Topic: Buying Used Boston Whaler Boats
- Replies: 7
- Views: 1346
Re: Buying Used Boston Whaler Boats
If you are looking for a boat to buy. I would highly consider finding one that was stored on the trailer on land and not wet slipped. While on land storing the boat under either a cover or garage would also minimize the amount of water sitting in the boat if the plug was left in.
- Fri Apr 29, 2022 3:54 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Montauk 17 Console Door Latch
- Replies: 1
- Views: 643
Montauk 17 Console Door Latch
Recommend a quality door latch--other than from Specialty Marine--to hold closed the console door of a 1987 MONTAUK 17 while the boat us underway. A cost of $40 is okay. The door latch does not have to have a key lock.