Search found 27 matches
- Sat May 19, 2018 8:19 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1988 Montauk 17: Battery Location Survey
- Replies: 14
- Views: 10116
Re: 1988 Montauk 17: Battery Location Survey
If I'm correct, originally the battery would be located in the stern of the boat. My father had a 1975 STRIPER 17 with the battery in the stern, but we re-located it inside the console. This helped to keep the battery dry and it made for less mess in the stern. Your dealer might think this battery p...
- Mon May 14, 2018 1:08 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: My 17 Montauk Adventure
- Replies: 4
- Views: 3652
Re: My 17 Montauk Adventure
Those are some nice boats you have there sir.
Best of luck!
Best of luck!
- Thu May 10, 2018 11:39 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: So my dad and I bought a boat 2 : 1981 striper 17' restoration
- Replies: 19
- Views: 12471
Re: So my dad and I bought a boat 2 : 1981 striper 17' restoration
Final coat of paint has been applied and we're satisfied to say the least.
We're letting everything dry up right now for us to inspect it later.
After this we'll re-apply a thicker anti-slip, and afterwards we'll continue with interior detailing like the console and casting deck.
We're letting everything dry up right now for us to inspect it later.
After this we'll re-apply a thicker anti-slip, and afterwards we'll continue with interior detailing like the console and casting deck.
- Thu May 10, 2018 11:35 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: So my dad and I bought a boat 2 : 1981 striper 17' restoration
- Replies: 19
- Views: 12471
Re: So my dad and I bought a boat 2 : 1981 striper 17' restoration
Weather finally cleared up. We lightly sanded down the original coat of paint using a light grid sanding sponge.
- Thu May 10, 2018 11:22 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: So my dad and I bought a boat 2 : 1981 striper 17' restoration
- Replies: 19
- Views: 12471
Re: Now back to our regularly scheduled program
We've had a bit of a rough week due to sudden heavy rains. The paint that was already applied did hold, but we decided to wait out the bad weather and choose a date to re-apply paint. While this was going on, we did find time to apply the new anti-fouling. What we used was Total Boat's copper-free a...
- Thu May 10, 2018 10:56 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: So my dad and I bought a boat 2 : 1981 striper 17' restoration
- Replies: 19
- Views: 12471
Re: So my dad and I bought a boat 2 : 1981 striper 17' restoration
Before I continue telling the story of our progress, The same day we repaired our boat's floor, we also applied our anti slip. We primarily decided on the interlux anti slip of which pictures of its result will follow. Not that its a bad brand, but the result did not give an aggressive enough grip. ...
- Sun May 06, 2018 3:57 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: So my dad and I bought a boat 2 : 1981 striper 17' restoration
- Replies: 19
- Views: 12471
Re: So my dad and I bought a boat 2 : 1981 striper 17' restoration
jimh wrote:BERT--thanks for the further details. I know it is hard to accomplish work and take pictures at the same time, particularly when the work involves getting your hands dirty. You are doing a nice job of documenting this work.
No problem. I'll do anything to make it better :)
- Sun May 06, 2018 11:19 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: So my dad and I bought a boat 2 : 1981 striper 17' restoration
- Replies: 19
- Views: 12471
Re: So my dad and I bought a boat 2 : 1981 striper 17' restoration
BERT--you also mention removing some wood from the hull interior. Can you describe in more detail where the wood was located? Was it part of the deck underlayment to reinforce the deck? Yes [the removed wood] was the deck underlayment. Where we cut open and dug out the foam, we also removed and rep...
- Sun May 06, 2018 11:04 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: So my dad and I bought a boat 2 : 1981 striper 17' restoration
- Replies: 19
- Views: 12471
Re: So my dad and I bought a boat 2 : 1981 striper 17' restoration
We did leave the cut-out as underlayment for the deck.
We did our best for the new foam to allign with the old foam.
We did our best for the new foam to allign with the old foam.
- Sun May 06, 2018 10:05 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: So my dad and I bought a boat 2 : 1981 striper 17' restoration
- Replies: 19
- Views: 12471
- Sun May 06, 2018 10:04 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: So my dad and I bought a boat 2 : 1981 striper 17' restoration
- Replies: 19
- Views: 12471
Re: So my dad and I bought a boat 2 : 1981 striper 17' restoration
The following shows us filling the compartment with foam. We used 2-lbs two-part polyurethane foam from SeaHawk. We used [less than] than a cup of our half-and-half mixture. It took about two minutes for the foam to expand and dry. We closed off everything with 1.5-ounce chop-mat fiberglass soaked i...
- Sun May 06, 2018 9:58 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: So my dad and I bought a boat 2 : 1981 striper 17' restoration
- Replies: 19
- Views: 12471
Re: So my dad and I bought a boat 2 : 1981 striper 17' restoration
We've finally come to the part where my helpers and I dig out and replace the old foam. We started out checking how far the soft spot of fiberglass was spread, cut this out using a grinder, and we started digging out the old wet foam. Thankfully the general area of soft fiberglass wasn't all that bi...
- Fri May 04, 2018 12:50 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Exact Color for Blue Paint to Match 13-footer Interior
- Replies: 11
- Views: 6605
Re: Exact Color for Blue Paint to Match 13-footer Interior
BWBERT--having used the Jamestown Distributors "Boston Whaler Blue" Wet Edge Topside Paint for restoring the 17-footer in your second restoration thread, how did you like the color it gave for a classic Boston Whaler restoration? Would you use the Jamestown Distributors "Boston Whale...
- Thu May 03, 2018 11:03 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Exact Color for Blue Paint to Match 13-footer Interior
- Replies: 11
- Views: 6605
Re: Exact Color for Blue Paint to Match 13-footer Interior
BWBert—...Are you using the same paint as shown in the Jamestown Distributors YouTube presentation in the thread you linked to? The paint used in the thread "my dad and I bought a boat 2" (restoring a 17-footer is the ["Boston Whaler Blue"] that Jamestown Distributors has develo...
- Thu May 03, 2018 1:35 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Exact Color for Blue Paint to Match 13-footer Interior
- Replies: 11
- Views: 6605
Re: Exact Color for Blue Paint to Match 13-footer Interior
Hi Jimh--the paint used in the first restoration is a mix of topside white/blue/green paint. The second restoration shows the use of the BW blue paint.
- Fri Apr 27, 2018 10:08 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Exact Color for Blue Paint to Match 13-footer Interior
- Replies: 11
- Views: 6605
Re: Exact Color for Blue Paint to Match 13-footer Interior
Hi inksails. You can check with Jamestown Distributors for the Boston Whaler blue paint. I'm using the same paint for my 17-footer
viewtopic.php?f=6&t=3339
viewtopic.php?f=6&t=3339
- Wed Apr 25, 2018 11:08 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 15 Whaler Super Sport Project - Baystar Steering
- Replies: 127
- Views: 152500
Re: 15 Whaler Super Sport Project
Visited three lumber yards last week that carried exotic woods, and the first two were disappointing. A 50-mile ride to NH was worth the time and gas. This place has everything and I mean everything. This is just one of the wood sheds. https://i.imgur.com/EupcOjlb.jpg Met the owners daughter and to...
- Wed Apr 25, 2018 10:49 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: So my dad and I bought a boat 2 : 1981 striper 17' restoration
- Replies: 19
- Views: 12471
Re: So my dad and I bought a boat 2 : 1981 striper 17' restoration
All our hard work is paying off.
My dad is loving the result and so is our mechanic.
Pictures taken yesterday.
- Wed Apr 25, 2018 10:44 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: So my dad and I bought a boat 2 : 1981 striper 17' restoration
- Replies: 19
- Views: 12471
Re: So my dad and I bought a boat 2 : 1981 striper 17' restoration
man'sFeet.jpg openPaintContainers_a.jpg workshed.jpg We've been going at it like clockwork. Our progress has been twice as fast compared to our previous restoration. The boat's interior has been painted and we're planning on tackling the floor today. There is one minor soft spot upfront and the old...
- Wed Apr 25, 2018 10:40 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: So my dad and I bought a boat 2 : 1981 striper 17' restoration
- Replies: 19
- Views: 12471
Re: So my dad and I bought a boat 2 : 1981 striper 17' restoration
We called our favorite glass mechanic, and he started immediately.
- Wed Apr 25, 2018 10:35 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: So my dad and I bought a boat 2 : 1981 striper 17' restoration
- Replies: 19
- Views: 12471
Re: So my dad and I bought a boat 2 : 1981 striper 17' restoration
The whole point to restoring this boat has been to come up with something unique. Our clients loved our first restoration, so we wanted to use that as a base. I started doing some google searching, till I came about the 40th anniversary whaler 13 My dad and I both love that model so we thought, heck...
- Wed Apr 25, 2018 10:29 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: So my dad and I bought a boat 2 : 1981 striper 17' restoration
- Replies: 19
- Views: 12471
Re: So my dad and I bought a boat 2 : 1981 striper 17' restoration
The day the boat came, we could already tell it was in a bit of a rough shape.
We stripped the railings and fixed the engine up as well.
All the e-tec needed was a new fuel pump and it fired right up.
We stripped the railings and fixed the engine up as well.
All the e-tec needed was a new fuel pump and it fired right up.
- Wed Apr 25, 2018 10:25 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: So my dad and I bought a boat 2 : 1981 striper 17' restoration
- Replies: 19
- Views: 12471
So my dad and I bought a boat 2 : 1981 striper 17' restoration
Hi everybody. I'm back! with a new restoration. Our current project, a 1981 17' striper was bought a couple of months ago from one of our clients. She is planning on buying a bigger boat for her resort, and she wanted us to be the first ones to consider buying the boat. Well..., we did and we're exc...
- Sun Apr 22, 2018 8:19 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: So my dad and I bought a boat
- Replies: 34
- Views: 24275
Re: I'm back! Bringing the thread back to life for some good news
Hi everyone, First of, I'm back! I took a short break from continuouswave more to keep my focus on school, my new business, and most of all 'boats' My builds will be posted under my new handle from now on and off-course, I have a new build waiting for you all to see. Hope you will all enjoy, and mak...
- Sun Apr 22, 2018 8:01 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Mercury 115 FOURSTROKE Won't Start
- Replies: 3
- Views: 2769
Re: Found a solution
Hi Jimh, Thankyou for the reply. We did take the temperature sensor into consideration, but it was functioning just fine. We finally decided to scan the engine again as a last ditch effort. After some testing, the engine wouldn't start at all and we also saw that the CPS sensor wasn't giving an rpm ...
- Fri Apr 13, 2018 2:02 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Mercury 115 FOURSTROKE Won't Start
- Replies: 3
- Views: 2769
2008 Mercury 115 FOURSTROKE Cold Starting
I am currently working on a 2008 Mercury 115 FOURSTROKE engine, and we are having some big problems starting this engine. A scan of the engine told us that we needed to change the fuel pump. So we did. No luck. After a bit of time, we bypassed the safety lanyard switch, and we then noticed that coil...
- Fri Apr 13, 2018 1:28 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Mercury 115 FOURSTROKE Won't Start
- Replies: 3
- Views: 2769
Mercury 115 FOURSTROKE Won't Start
Goodday all--I'm Bert and I'm a big fan of Whalers. I am currently working on a Mercury 115 FOURSTROKE that won't start. Where I can post about the topic?
[BERT--I moved your post to the REPAIRS and MODIFICATION FORUM--jimh]
Thank you
[BERT--I moved your post to the REPAIRS and MODIFICATION FORUM--jimh]
Thank you