Is hull sweating common?
I was sanding in preparation for applying a primer paint. I noticed the bottom of the hull was sweating. It was a very humid day after a cool down. I never noticed hull sweating before when working on the hull on several summer humid days.
Search found 10 matches
- Sun Oct 07, 2018 9:08 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Hull Sweating
- Replies: 5
- Views: 4191
- Fri Sep 07, 2018 8:25 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1974 Montauk 17 Restoration
- Replies: 0
- Views: 3389
1974 Montauk 17 Restoration
My process [to restore a 1974 Montauk 17] is in action; I am: —patching the floor holes where needed —laying fiberglass on the deck edges where the deck soft and cracked —filling in the small voids with spray foam. Should I fair the entire deck with a resin and additive to smooth it all out before p...
- Mon Aug 27, 2018 12:03 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Montauk 17 interior restoration project prep
- Replies: 1
- Views: 2343
Re: Montauk 17 interior restoration project prep
Sounds familiar..i just joined this club. 74 Montauk 17.
- Fri Aug 24, 2018 8:47 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1974 Montauk 17 Wood Location Diagram
- Replies: 1
- Views: 2543
Re: Plywood locations
Believe I've found [the wood locating diagram for a 1974 MONTAUK 17 in the REFERENCE article at CONTINUOUSWAVE about the 16/17-foot hull under the sub-heading "Embedded Wood"] at
http://continuouswave.com/whaler/reference/16-17/graphics/17wood1190x743.jpeg
http://continuouswave.com/whaler/reference/16-17/graphics/17wood1190x743.jpeg
- Fri Aug 24, 2018 7:20 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1974 Montauk 17 Wood Location Diagram
- Replies: 1
- Views: 2543
1974 Montauk 17 Wood Location Diagram
Can anyone shed light on the flooring of a 74 Montauk 17?
Is it all-plywood core or just in center areas.
On my Montauk there is some floor lifted,and it seems very thin mostly on the outer edges.
Is it all-plywood core or just in center areas.
On my Montauk there is some floor lifted,and it seems very thin mostly on the outer edges.
- Wed Aug 22, 2018 11:35 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Inner Hull Foam Repair
- Replies: 19
- Views: 12568
Re: Inner Hull Foam Repair
[I] was thinking: just drill two [holes], one at the head of the problem and one at the end. [W]hen [the expanding foam that was introduced in some unexplained method] comes out the end [hole you drilled] the void is full—is that correct? I want to explore options and ideas. I have 1974 Montauk 17 p...
- Tue Aug 21, 2018 9:41 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 150 MONTAUK Hull Damage Repair
- Replies: 47
- Views: 33171
Re: 150 MONTAUK Hull Damage Repair
ZIP system seam tape [will] stick better than any Duct or Gorilla tape.
- Tue Aug 21, 2018 9:29 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Inner Hull Foam Repair
- Replies: 19
- Views: 12568
Re: Inner Hull Foam Repair
[Are] moisture and water in the plywood [removed by this process]?
- Tue Aug 21, 2018 8:41 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Inner Hull Foam Repair
- Replies: 19
- Views: 12568
Re: Inner Hull Foam Repair
[What is the purpose of the extra holes]?
- Tue Aug 21, 2018 6:24 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Inner Hull Foam Repair
- Replies: 19
- Views: 12568
Re: Inner Hull Foam Repair
Does this method [of repairing the soft deck with introduction of a liquid that cures into foam] push out water that is present?