Search found 12 matches

by Fenx
Tue Jul 23, 2019 1:38 pm
Forum: PERFORMANCE
Topic: 1988 Outrage 22 Yamaha F225F
Replies: 8
Views: 3686

Re: 1988 Outrage 22 Yamaha F225F

Thanks for your valuable advice biggiefl
by Fenx
Mon Jul 22, 2019 3:41 pm
Forum: PERFORMANCE
Topic: 1988 Outrage 22 Yamaha F225F
Replies: 8
Views: 3686

Re: 1988 Outrage 22 Yamaha F225F

Thanks so much guys Engine is mounted 1 hole up and judging by the shape of the water spray behind the transom i would think that the engine needs to go up one more hole at least This is confirmed by the fact that I reach top speed with a very high tilt Engine has 36 hours already ran mostly at 3400...
by Fenx
Sun Jul 21, 2019 2:43 pm
Forum: PERFORMANCE
Topic: 1988 Outrage 22 Yamaha F225F
Replies: 8
Views: 3686

Re: 1988 Outrage 22 Yamaha F225F

Thanks Jim Gear ratio is 1.75 and WOT is between 5000 and 6000 rpm I currently have a 19 in testing propeller of some unknown make. It reaches 43 knots at 5300 rpm with two persons on board. Here's a link to the engine data sheet https://www.yamaha-motor.eu/cy/en/products/marine-engines/high-power-r...
by Fenx
Sun Jul 21, 2019 8:04 am
Forum: PERFORMANCE
Topic: 1988 Outrage 22 Yamaha F225F
Replies: 8
Views: 3686

1988 Outrage 22 Yamaha F225F

I have finally finished restoring my beloved [1988 OUTRAGE 22]. It is re-powered with a new Yamaha F225F 4.2 liter model. Give me advice on propeller dimension re 17-inch or 19-inch.
Thanks.
by Fenx
Sun Mar 10, 2019 12:17 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Through Hull Drains: A New Technique
Replies: 4
Views: 2479

Re: Through Hull Drains: A New Technique

I created a guide with illustrations; it can be downloaded from:

https://drive.google.com/open?id=10T-VpM4a-u45Ge0R-zrPFIA58_mtD5wb
by Fenx
Sun Mar 10, 2019 3:18 am
Forum: REPAIRS and MODIFICATIONS
Topic: Through Hull Drains: A New Technique
Replies: 4
Views: 2479

Re: Through Hull Drains: A New Technique

Draft version. No pics yet. Step 1 – Prepare the carving tool and carve the hollow space to accomodate the resin. Use a bike spoke to create the carving tool. Cut it at about 15 cm length. The thick and conic part of the spoke is a perfect carving bit. Not only it will carve through the foam but it ...
by Fenx
Sun Mar 10, 2019 1:38 am
Forum: REPAIRS and MODIFICATIONS
Topic: Through Hull Drains: A New Technique
Replies: 4
Views: 2479

Re: Through Hull Drains: A New Technique

That [intrepretation of the "donut"] is correct: the walls of the annulus being about 3-cm thick, and that is the difference between the external diameter and the internal diameter of the annulus. I will post some pics and work on a guide as I had to go through some trial and error in the ...
by Fenx
Wed Mar 06, 2019 5:02 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Through Hull Drains: A New Technique
Replies: 4
Views: 2479

Through Hull Drains: A New Technique

I am in the process of restoring a 1988 OUTRAGE 22. Having noticed how the foam can get soaked through the brass drain tubes if they let water in, I went a bit radical with the fix. After removing the brass I basically carved a doughnut shaped cavity by working through the holes of the drain pipes w...
by Fenx
Sun Dec 16, 2018 3:07 am
Forum: REPAIRS and MODIFICATIONS
Topic: 150 MONTAUK Hull Damage Repair
Replies: 47
Views: 10091

Re: 150 MONTAUK Hull Damage Repair

also I would ask the repair main evidence of how big they needed to open the area to make sure there was no more plastic
by Fenx
Sun Dec 16, 2018 3:06 am
Forum: REPAIRS and MODIFICATIONS
Topic: 150 MONTAUK Hull Damage Repair
Replies: 47
Views: 10091

Re: 150 MONTAUK Hull Damage Repair

I think the moment a second [manifestation of damage to the hull gelcoat that is] of similar nature occurs, Boston Whaler should replace the hull.
by Fenx
Sun Sep 30, 2018 12:26 pm
Forum: PERFORMANCE
Topic: Engine Mounting Height for Outrage 22
Replies: 3
Views: 4439

Re: Engine Mounting Height for Outrage 22

Thanks Jim, much appreciated.
by Fenx
Sat Sep 29, 2018 4:44 pm
Forum: PERFORMANCE
Topic: Engine Mounting Height for Outrage 22
Replies: 3
Views: 4439

Engine Mounting Height for Outrage 22

Hello. I'm just about to re-power a 1988 Outrage 22 with a 2017 Yamaha F225.

Could you give me advice on engine height, please.