Search found 83 matches
- Tue Apr 13, 2021 8:27 pm
- Forum: MARKETPLACE
- Topic: SOLD: 2007 - Outrage 210 $41,5000 in Florida
- Replies: 1
- Views: 3795
Re: FS: 2007 - Outrage 210 (Impeccable condition)
SOLD!!! Thanks to all that expressed interest
- Sun Apr 11, 2021 10:46 pm
- Forum: MARKETPLACE
- Topic: SOLD: 2007 - Outrage 210 $41,5000 in Florida
- Replies: 1
- Views: 3795
SOLD: 2007 - Outrage 210 $41,5000 in Florida
I am selling our 210 Outrage as we have moved up to a long range trawler and there is no room at the dock for both.... Of all the many boats I have owned under 27' the 210 has been my favorite! This is probably the nicest 210 Outrage to be found anywhere. Meticulously maintained and virtually all Bo...
- Thu Aug 06, 2020 6:02 pm
- Forum: MARKETPLACE
- Topic: SOLD: Montauk 17 with 115-HP and trailer
- Replies: 1
- Views: 3040
Re: FS: Beautiful 1979 Montauk with 115hp Tower of Power & Trailer
Boat is sold. Thank you for your interest.
- Wed Apr 01, 2020 6:58 pm
- Forum: The GAM
- Topic: c.2007 210 Outrage Bilge, Power, Defects
- Replies: 26
- Views: 9255
Re: c.2007 210 Outrage Bilge, Power, Defects
I've been away from the forum for a bit, so I just noticed this thread. Q6: Do cupholders, storage and fish boxes, and the center console drain into the bilge? Yes, the rear cup holders on a 210 Outrage do drain into [the aft below deck open space]. The fish boxes on a 210 Outrage do not drain into ...
- Wed Jan 15, 2020 6:27 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 210 Outrage - Verado Power Steering Hose Replacement
- Replies: 19
- Views: 7665
Re: 210 Outrage - Verado Power Steering Hose Replacement
The process of removing the power steering hoses was moderately difficult, but do-able for a good backyard mechanic that has access to a hot-tub to soak in after a day of squeezing into awkward positions and tight spaces. To gain access to the console side of the hoses, I removed the radio (and moun...
- Wed Jan 15, 2020 6:11 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 210 Outrage - Verado Power Steering Hose Replacement
- Replies: 19
- Views: 7665
Re: 210 Outrage - Verado Power Steering Hose Replacement
vze2gbs4: Thanks for that information. I left the house at 8:30 this morning and didn't see your post until just a few minutes ago (6pm). I would have bought that damper from you, had I known you had one. Unfortunately,I wound up purchasing one from my local dealer. The good news is that the entire ...
- Tue Jan 14, 2020 5:58 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 210 Outrage - Verado Power Steering Hose Replacement
- Replies: 19
- Views: 7665
Re: 210 Outrage - Verado Power Steering Hose Replacement
Interestingly, a post from a user on THT identified the problem correctly, despite my bad diagnosis and incorrect information from Boston Whaler. I didn't see this, but there was a short "damper" hose hidden inside the tube leading from the pump to the bilge. Unfortunately, even after I...
- Mon Jan 13, 2020 5:27 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 210 Outrage - Verado Power Steering Hose Replacement
- Replies: 19
- Views: 7665
Re: 210 Outrage - Verado Power Steering Hose Replacement
Ok, so here's what I learned today: I called Boston Whaler, and I discussed how the hoses were installed. They weren't much help, but did confirm the Mercury part number for this item. Next per Jim's suggestion, I called Lauderdale Marine. Unfortunately they don't work on boats over 10 years old (mi...
- Sun Jan 12, 2020 7:01 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Verado power steering fluid mystery: where did it go?
- Replies: 6
- Views: 7312
Re: Verado power steering fluid mystery: where did it go?
FWIW, Verado PS fluid is very unique and can be hard to find. I live in Florida and called a dozen stores to find it this weekend. BE SURE that you get 0W-30 FULL Synthetic fluid. Do not listen to the uniformed boat store people who will tell you that the regular Quicksilver PS fluid is fine for use...
- Sun Jan 12, 2020 6:12 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 210 Outrage - Verado Power Steering Hose Replacement
- Replies: 19
- Views: 7665
Re: 210 Outrage - Verado Power Steering Hose Replacement
Floater, If I can avoid pulling hoses, that would be preferable, as long as the fix is done properly. I would need to have a longer "pipe" section if I cut out the old fitting as the hose would be 3-4" too short after cutting the old crimp.
- Sun Jan 12, 2020 5:06 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 210 Outrage - Verado Power Steering Hose Replacement
- Replies: 19
- Views: 7665
Re: 210 Outrage - Verado Power Steering Hose Replacement
Jim, The Verado PS pump has been reported by many to be troublesome when it gets wet, making BW's choice of location for that pump pretty bad. The condensation problem on the hatches (see my previously posted topic) further exacerbates the rust. To help prevent this problem occuring again in the fut...
- Sun Jan 12, 2020 1:20 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 210 Outrage - Verado Power Steering Hose Replacement
- Replies: 19
- Views: 7665
Re: 210 Outrage - Verado Power Steering Hose Replacement
This is a 2007 Outrage 210.
Link to diagram attached. Reference page 3 and page 5
http://bostonwhaler.com.s3.amazonaws.co ... t-2007.pdf
Link to diagram attached. Reference page 3 and page 5
http://bostonwhaler.com.s3.amazonaws.co ... t-2007.pdf
- Sun Jan 12, 2020 8:45 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 210 Outrage - Verado Power Steering Hose Replacement
- Replies: 19
- Views: 7665
210 Outrage - Verado Power Steering Hose Replacement
The VERADO power steering on my 210 OUTRAGE was acting funny. I checked the power steering reservoir, and it was almost empty. I returned to the dock. I found a pinhole leak in the metal pipe on the fitting for the power steering pressure line. veradoPowerSteering.jpg I'm not sure if the fitting can...
- Thu Jan 09, 2020 10:54 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 210 Outrage - Rear lockers always wet
- Replies: 7
- Views: 3332
Re: 210 Outrage - Rear lockers always wet
This morning I came up with an idea to experiment with 1" rigid insulation to see if this may help with the starboard condensing. I will cut a piece to the size of the rear seat and lay it over the hatch on one side. I'll compare the results of the left and right sides after a few days to see i...
- Wed Jan 08, 2020 8:20 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 210 Outrage - Rear lockers always wet
- Replies: 7
- Views: 3332
Re: 210 Outrage - Rear lockers always wet
FNO, thanks for your input. I do have a router table, but not sure I completely understand your idea. Do you mean to cut a 1/8-inch-deep groove around the entire underside of the hatch cover at 1/2-inch in from the outer edge? If that is correct, I still don't understand how it stops the condensatio...
- Mon Jan 06, 2020 5:33 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 210 Outrage - Rear lockers always wet
- Replies: 7
- Views: 3332
210 Outrage - Rear lockers always wet
I do love my 210 Outrage, except for one constant annoyance. The rear lockers are always wet. When I open the hatches, the inside (underneath) is soaked, even when it hasn't rained. There are drain groves all around the hatch cover, but no rubber seals on the hatch itself. What can be done to stop t...
- Wed Dec 25, 2019 4:25 pm
- Forum: MARKETPLACE
- Topic: Free: Knurled Lock Nut for classic pole lamp
- Replies: 6
- Views: 4775
- Wed Dec 25, 2019 11:34 am
- Forum: MARKETPLACE
- Topic: Free: Knurled Lock Nut for classic pole lamp
- Replies: 6
- Views: 4775
Re: Free: Knurled Lock Nut for classic pole lamp
Jim, I could use that nut. My '79 is virtually all original, except my kids lost that nut and washer.
Thanks
Thanks
- Wed Dec 25, 2019 11:24 am
- Forum: MARKETPLACE
- Topic: SOLD: Montauk 17 with 115-HP and trailer
- Replies: 1
- Views: 3040
SOLD: Montauk 17 with 115-HP and trailer
Anyone looking for an outstanding classic, this is it, See photos at
https://www.thehulltruth.com/13213238-post8.html
$10,000 for boat, motor and trailer with folding tongue).
All interested parties can email me at jkc.zigzag@gmail.com or on THT.
https://www.thehulltruth.com/13213238-post8.html
$10,000 for boat, motor and trailer with folding tongue).
All interested parties can email me at jkc.zigzag@gmail.com or on THT.
- Tue Dec 24, 2019 6:09 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Raising height of All-Round Pole Lamp
- Replies: 1
- Views: 1749
Raising height of All-Round Pole Lamp
Today, I decided to raise the all-round light on the T-top of my 210 Outrage. The addition of a radome made seeing the white light very difficult from dead ahead, and that has bothered me and is against the Navigation Rules. The lamp is made by Perko and stood about 13.5-inches overall. I decided to...
- Tue Oct 08, 2019 4:37 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Adding Subwoofer and Amp to Outrage 210
- Replies: 23
- Views: 20133
Re: Adding Subwoofer and Amp to Outrage 210
A few more....
- Tue Oct 08, 2019 4:36 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Adding Subwoofer and Amp to Outrage 210
- Replies: 23
- Views: 20133
Re: Adding Subwoofer and Amp to Outrage 210
Finally had some time to work on the sub again. Today, the box was belt sanded, routered with a radius, filled (wood putty) and re-sanded with a palm sander. Then decided to try "Flex Seal" liquid rubber paint instead of epoxy & painting (my original plan). Box could have been wood fil...
- Mon Sep 23, 2019 1:07 pm
- Forum: MARKETPLACE
- Topic: WTB - Old Clarion CMD4 for parts
- Replies: 0
- Views: 13305
WTB - Old Clarion CMD4 for parts
Anyone have a Clarion CMD4 laying around collecting dust? I need a few parts for mine (knob, rubber trim piece, etc.)
Thanks
J
Thanks
J
- Sun Sep 22, 2019 9:45 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Adding Subwoofer and Amp to Outrage 210
- Replies: 23
- Views: 20133
Re: Adding Subwoofer and Amp to Outrage 210
Jim, my sub is actually a 10", so it does go pretty low. By the way as an audiophile, I never understood a subwoofer's role to produce "sub-sonic" frequencies, although many may do that. In general a "subwoofer" is designed to re-produce "sub-bass" sounds to help o...
- Sat Sep 21, 2019 6:04 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Adding Subwoofer and Amp to Outrage 210
- Replies: 23
- Views: 20133
Re: Adding Subwoofer and Amp to Outrage 210
Today, I constructed a box for the Kenwood sub to experiment a bit. The box was built out of 3/4" plywood. Dimensions were 12 x 12 x 7.5 (external). This did not provide a large volume for air space, but I deliberately made it a small as I could, which would allow the Kenwood to fit. As space i...
- Fri Sep 20, 2019 1:11 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Adding Subwoofer and Amp to Outrage 210
- Replies: 23
- Views: 20133
Re: Adding Subwoofer and Amp to Outrage 210
Today's update. Finished running the rear speaker wires and tidying up all the wires under the console. I hooked up the 10" Kenwood sub again, just to play around. It was left in the open on a helm pad on the deck. I attached hooked it up to channel 5 (mono sub) on the JL and listened for a whi...
- Wed Sep 18, 2019 7:27 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Adding Subwoofer and Amp to Outrage 210
- Replies: 23
- Views: 20133
Re: Adding Subwoofer and Amp to Outrage 210
A few more photos.
- Wed Sep 18, 2019 7:25 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Adding Subwoofer and Amp to Outrage 210
- Replies: 23
- Views: 20133
Re: Adding Subwoofer and Amp to Outrage 210
Day one: the project begins. Today, I cut a PVC board to mount the audio amplifier, circuit breaker and secure all the leads and wiring. Then I had to figure out where to mount everything, and there were not many choices for location. Originally I was thinking about the starboard side of the console...
- Sun Sep 08, 2019 10:51 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Adding Subwoofer and Amp to Outrage 210
- Replies: 23
- Views: 20133
Re: Adding Subwoofer and Amp to Outrage 210
The audio amplifier and loudspeakers are on the way, so I hope to be updating this thread soon. Tonight I ordered 12-ASG speaker wire, 4-AWG power wire, a 60-Ampere circuit breaker, and crimp battery lugs. I spent another $100 on the project and I haven't even started yet. My plan is to install the ...
- Thu Sep 05, 2019 7:10 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Adding Subwoofer and Amp to Outrage 210
- Replies: 23
- Views: 20133
Re: Adding Subwoofer and Amp to Outrage 210
I found a guy today who is selling a JL M700/5 amp (700 watt RMS, 5 channels), 10" sub and four 8" speakers. We've agreed on price, so if this sale goes through, I will update the forum on my results as soon as I receive them. While not part of my original plan, I think enlarging the 6.5&q...
- Thu Sep 05, 2019 7:45 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Adding Subwoofer and Amp to Outrage 210
- Replies: 23
- Views: 20133
Re: Adding Subwoofer and Amp to Outrage 210
I spoke with JL Audio and they claim their "infinite baffle" subs are designed specifically to work "outside" the box in open areas such as a console. Now how they get around the rear wave problems - I can't say, but they are a very well regarded audio company for marine/mobile a...
- Wed Sep 04, 2019 8:41 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Adding Subwoofer and Amp to Outrage 210
- Replies: 23
- Views: 20133
Re: Adding Subwoofer and Amp to Outrage 210
Jim, Regarding the SW - I was of the impression that there are two types. 1) those requiring installation in a "box" and 2) those designed to function in "free air". While I have never had any sub (at home) that wasn't in an extremely HD enclosure, the website at JL audio, sort o...
- Wed Sep 04, 2019 8:17 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Adding Subwoofer and Amp to Outrage 210
- Replies: 23
- Views: 20133
Re: Adding Subwoofer and Amp to Outrage 210
Jim, while I do like your cooler idea (especially down firing), I don't think this will work in my situation. My cooler (R-tic) is used for its traditional purpose and can not be sacrificed for audio. If only I could build a platform under it, that wouldn't raise the cooler too high - that would be ...
- Tue Sep 03, 2019 9:53 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Adding Subwoofer and Amp to Outrage 210
- Replies: 23
- Views: 20133
Adding Subwoofer and Amp to Outrage 210
What is a good location for a 10-inch-diameter loudspeaker for sub-sonic reproduction on a 210 Outrage? I cannot figure out a good location for the 10-inch diameter loudspeaker for reproduction of subsonic audio frequency. Earlier I though about a shallow mount on the front of the leaning post—clear...
- Sun Jul 28, 2019 10:43 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Anderson Upholstery
- Replies: 9
- Views: 11697
Re: Anderson Upholstery
You might want to bring those cushions to a local marine upholstery shop. I was in the same situation, not wanting to spend $280 ea for rear seat cushions that I walk on. Local shop did them for $100 ea and they are prefect.
- Mon Jul 08, 2019 8:35 pm
- Forum: The GAM
- Topic: 270 Vantage vs. Grady Freedom
- Replies: 5
- Views: 9828
Re: 270 Vantage vs. Grady Freedom
Seems pretty simple to me: Here would be my initial thoughts.... 1) If no local GW dealer, then how are you planning to get the boat serviced under warranty? There WILL be warranty problems no matter which you buy. 2) If you want to put your hands on a Vantage and are planning to spend $200K, then t...
- Sun Jun 09, 2019 7:00 pm
- Forum: PERFORMANCE
- Topic: 210 Outrage Trim Tab: Recommendation; Installation
- Replies: 21
- Views: 19902
Re: 210 Outrage Trim Tab: Recommendation; Installation
fno: Any updates?
- Thu May 30, 2019 1:33 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: DIY ideas for forward facing seats on 210 Outrage
- Replies: 6
- Views: 6572
Re: DIY ideas for forward facing seats on 210 Outrage
I will check to see if these might work. Not sure if the inside of the hull wall is flat or curved in the area of the forward seating, but I'll check tomorrow.
Thanks
Thanks
- Sun May 26, 2019 2:01 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: DIY ideas for forward facing seats on 210 Outrage
- Replies: 6
- Views: 6572
Re: DIY ideas for forward facing seats on 210 Outrage
Yes, I looked at the Birdsall products and they look like something that might work - except I don't know about mounting into fiberglass without some sort of backing plate or thru-bolt. Afraid a few hard waves and they might pull out. I really don't want to 5200 them to the inside of the hull either...
- Sun May 26, 2019 8:29 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: DIY ideas for forward facing seats on 210 Outrage
- Replies: 6
- Views: 6572
DIY ideas for forward facing seats on 210 Outrage
In December I purchased my 2007 Outrage 210. I've completed many upgrades since that time, but one improvement remains. I'd like to add forward facing backrests to the bow cushion area. Many of the new boats offer these and the wife would love to have them. Unfortunately the area under the bow cushi...
- Mon Apr 22, 2019 9:22 am
- Forum: PERFORMANCE
- Topic: 210 Outrage VERADO 200
- Replies: 17
- Views: 17278
Re: 210 Outrage VERADO 200
I have the 2006 six cylinder. I don't believe the [Mercury VERADO in-line four-cylinder] came out until a few years later.
- Mon Apr 22, 2019 7:48 am
- Forum: PERFORMANCE
- Topic: 210 Outrage VERADO 200
- Replies: 17
- Views: 17278
Re: 210 Outrage VERADO 200
The propeller [on the boat under discussion] is a Revolution4 17-pitch. I believe the REVOLUTION4 17-pitch is the propeller used in the Boston Whaler test [of the same type boat with VERADO 200 FOURSTROKE engine]. [The Mercury VERADO 200 FOURSTROKE engine] seems to run perfectly, so I'm not too conc...
- Wed Apr 17, 2019 11:47 pm
- Forum: PERFORMANCE
- Topic: 210 Outrage Trim Tab: Recommendation; Installation
- Replies: 21
- Views: 19902
Re: 210 Outrage Trim Tab: Recommendation; Installation
I'll be very interested in how your installation goes. Please take pics if there are any special requirements and let us know your opinion on how well they work.
- Mon Apr 15, 2019 9:23 pm
- Forum: PERFORMANCE
- Topic: 210 Outrage VERADO 200
- Replies: 17
- Views: 17278
Re: 210 Outrage VERADO 200
I will get over to the boat and check the prop later this week. Thanks for all the insight and detailed analysis.
- Sun Apr 14, 2019 11:17 pm
- Forum: PERFORMANCE
- Topic: 210 Outrage VERADO 200
- Replies: 17
- Views: 17278
- Sat Apr 13, 2019 8:32 am
- Forum: PERFORMANCE
- Topic: 210 Outrage VERADO 200
- Replies: 17
- Views: 17278
210 Outrage VERADO 200
TO OWNERS OF c.2007 210 OUTRAGE with VERADO 200: tell me the maximum engine speed reached. [The maximum engine speed reached on my 2007 210 OUTRAGE with a VERADO 200 with around 175-hours running time,] with a T-top, with two people, with no water, with 55-gallons of fuel, and with the stock four-bl...
- Wed Apr 10, 2019 9:27 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 210 OUTRAGE Electronic Boxes and Outrigger Bases
- Replies: 1
- Views: 3328
Re: 210 OUTRAGE Electronic Boxes and Outrigger Bases
FNO--thanks for your reply. Timing is everything right? Well my electronics box was delivered by FedEx today. I was looking for the Smith box, but I don't think they still make them. I ordered a Fishmaster, which appears to be a nice box and good size for the 210 Outrage. I plan to install the box t...
- Wed Mar 27, 2019 12:31 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 210 OUTRAGE Replacing Scuppers
- Replies: 9
- Views: 7401
Re: 210 OUTRAGE Replacing Scuppers
I couldn't get a wrench on there, but I used 4200 on the outside and on the nut and tightened them down by hand as far as I could get them. They are a hard to reach and no tool I had (and I have plenty) seemed to help. I believe the fitting is well secured and will test for leaks this weekend. Thank...
- Fri Mar 22, 2019 11:34 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 210 OUTRAGE Replacing Scuppers
- Replies: 9
- Views: 7401
Re: 210 OUTRAGE Replacing Scuppers
VZE'--thanks for that information. I called Boston Whaler and they gave me Eastern as the OEM for the scuppers. I have ordered four new fittings and will replace [the scuppers on the boat] this weekend. The hoses were replaced already and they are not too short. Two of the scuppers where already cha...
- Sun Mar 17, 2019 10:02 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 210 OUTRAGE Replacing Scuppers
- Replies: 9
- Views: 7401
210 OUTRAGE Replacing Scuppers
I have a 210 Outrage, and I have just noticed there is a broken scupper. The scuppers are (surprisingly) below the water line, so water has been leaking into the bilge. I am not the original owner but I see that two (of the four) self-bailing scuppers have been replaced with TH Marine [parts]. I'm n...