Search found 33 matches
- Sat Jun 06, 2020 8:59 pm
- Forum: The GAM
- Topic: Sometimes you are dealt a raw deal, but then something really makes big impact on you
- Replies: 14
- Views: 6893
Re: Sometimes you are dealt a raw deal, but then something really makes big impact on you
Well that’s not quite where I expected this story to end, and I am extremely happy for you and hope the prognosis continues so positive. Welcome to the club no one wants to be in. On the upside, you’ll never be the same person again. You’ll be a better person and you now have an even better idea of ...
- Tue Mar 10, 2020 10:59 pm
- Forum: The GAM
- Topic: Fun things to do in your 19 Outrage.
- Replies: 9
- Views: 4829
Re: Outrage 19 pictorial thread: Fun things to do in your 19 Outrage. Scalloping, lobstering, fishing, sharks toothing,
Have you considered adopting an older adult? Low maintenance, gets along well with dogs and cats. Fully house trained.
PS really really nice photos of the boat, activities, and a family that clearly loves being together. Thanks for posting.
PS really really nice photos of the boat, activities, and a family that clearly loves being together. Thanks for posting.
- Sun Jan 19, 2020 1:07 pm
- Forum: The GAM
- Topic: Moving up to MONTAUK 17 or OUTRAGE 18
- Replies: 34
- Views: 14841
Re: Moving up to MONTAUK 17 or OUTRAGE 18
Jim is spot on: For the love of all things holy, the most recent Outrage with the Yamaha saltwater series AND a trailer is your new boat. Assuming, that is, if you have the vehicle to trailer it and the space to store it. In my albeit limited experience, Yamaha 2 strokes are generally quieter than o...
- Thu Jan 09, 2020 2:37 pm
- Forum: MARKETPLACE
- Topic: Appraisal 1987 Outrage 18
- Replies: 8
- Views: 4915
Re: Appraisal 1987 Outrage 18
Very pretty boat. Good comments by everyone. If it’s helpful there are two Whaler Outrage 18 boats of similar style to yours that show up on Facebook marketplace in the Houston TX area. Though one is a dual seat rather than the classic RPS. Not a lot of detailed info but it’s at least a couple data ...
- Wed Nov 27, 2019 1:03 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Pocket Hose Silver Bullet Expanding Hose for Rigging Tunnel Cleaning
- Replies: 4
- Views: 2359
Re: Pocket Hose Silver Bullet Expanding Hose for Rigging Tunnel Cleaning
It’s soft and has sideways give that a regular hose doesn’t. Use whatever works for you. I also like that I can store it in a small space.
- Tue Nov 26, 2019 5:25 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Pocket Hose Silver Bullet Expanding Hose for Rigging Tunnel Cleaning
- Replies: 4
- Views: 2359
Re: Pocket Hose Silver Bullet Expanding Hose for Rigging Tunnel Cleaning
The Silver Bullet Expanding Hose flattens out when it’s empty as well as shortening up and is very compact. It has a some sort of fabric covering, Something between a slinky and a fire hose. Diameter when full of water is like a medium garden hose. The hose I bought is 50-feet long. Another aspect i...
- Mon Nov 25, 2019 5:45 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Pocket Hose Silver Bullet Expanding Hose for Rigging Tunnel Cleaning
- Replies: 4
- Views: 2359
Pocket Hose Silver Bullet Expanding Hose for Rigging Tunnel Cleaning
Before running in a new SONAR transducer cable, I wanted to clean debris out of my [boat's] rigging tunnel I found an expanding hose at the local home improvement center called the "Pocket Hose Silver Bullet". The Pocket Hose Silver Bullet hose is nice, flexible, and when it's under pressu...
- Mon Nov 25, 2019 5:29 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1989 OUTRAGE 22 Loose Deck Under Console
- Replies: 9
- Views: 4098
Re: 1989 OUTRAGE 22 Loose Deck Under Console
[Endorses the suggested from ACASSIDY:] What about unscrewing the console and removing the strips of mounting wood under the console. Then proceed with filling those holes in the deck and then re-drilling new holes in the mounting boards and deck for mounting the console with new holes slightly off ...
- Sat Sep 21, 2019 9:52 am
- Forum: The GAM
- Topic: My new 1990 Super Sport 15
- Replies: 24
- Views: 15464
Re: New to me 1990 15' Super Sport
That is terrific. Cute family, beautiful area, classic boat. Those girls will never forget growing up with the SS. Excellent, excellent decision.
- Sat Sep 21, 2019 9:47 am
- Forum: The GAM
- Topic: 160 DAUNTLESS OUTRAGE 17II GUARDIAN 18
- Replies: 8
- Views: 11490
Re: 160 DAUNTLESS OUTRAGE 17II GUARDIAN 18
Since you make fairly long runs, is there any meaningful difference in fuel capacity? Engine efficiency? The other thing I would consider strongly is the layout. Does the [GUARDIAN] have a dive door? I’ve never seen a [GUARDIAN\ but I understand they are more customized so the layout could be really...
- Thu Sep 19, 2019 2:42 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Classic Montauk All-round White Lamp Relocation
- Replies: 24
- Views: 21075
Re: Classic Montauk All-round White Lamp Relocaton
The question on my mind about the placement of an anchor light has been whether it might interfere with night vision in the event the light were in front of me. An anchor light is shown when the boat is at anchor, not when it is underway. So there is really no concern about having one's night visio...
- Thu Sep 19, 2019 2:10 pm
- Forum: The GAM
- Topic: Advice on Purchase
- Replies: 9
- Views: 11232
Re: Advice on Purchase
Mr Whaler101 Take a look in the classifieds. Someone just posted a Supersport 15 and it looks really nice and sounds like it has been well maintained and not a ton of use, at least at first glance from the photos and description. Not sure where you are, but if NE, it’s not that terribly far. And a f...
- Thu Sep 19, 2019 3:06 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Classic Montauk All-round White Lamp Relocation
- Replies: 24
- Views: 21075
Re: Classic Montauk All-round White Lamp Relocaton
On the location of the all around white light, all the recent 19/17/15 foot Whalers I see have them mounted on the console amidships. At first I thought it was an odd thing not to be on the transom. Now I'm a fan. This is very helpful, including the explanation and information on antenna placement....
- Tue Sep 17, 2019 1:00 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1983 Montauk 17 Re-fastening RPS to Deck
- Replies: 13
- Views: 14133
Re: 1983 Montauk 17 Re-fastening RPS to Deck
Phil and Archie, Wow, I just had an epiphany. What if you guys are right? I think that I may finally be old enough to accept that someone else could be right... getting this weird out-of-body floating feeling... Archie, to your question about the plug spinning, the first step in the bonding is wetti...
- Mon Sep 16, 2019 2:40 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1983 Montauk 17 Re-fastening RPS to Deck
- Replies: 13
- Views: 14133
Re: 1983 Montauk 17 Re-fastening RPS to Deck
Thanks all. Im revising my thoughts thanks to the feedback. 5200 for the riser to deck. Instead of creating a void in the foam immediately under the plywood, I’m going to go with a 1” forstener through the plywood and fill it with 404 thickened epoxy (peanut butter consistency). Maybe a small void i...
- Mon Sep 16, 2019 2:30 pm
- Forum: The GAM
- Topic: Advice on Purchase
- Replies: 9
- Views: 11232
Re: Advice on Purchase
Just my two centavos but it depends on what you want. A boat that you can enjoy now or a project. MOST I’d pay is $3,000 and only if I didn’t observe any significant problems. If no problems other than cosmetic, then you can enjoy it for a while and buy mahogany in the off season. Even with the ugly...
- Sun Sep 15, 2019 4:37 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: White All-Round Lamp Too High
- Replies: 13
- Views: 14237
Re: White All-Round Lamp Too High
If you don’t have a tube cutter, I cut my anchor light pole shorter using a metal blade hacksaw. Cheap pole so it was easy to cut. Put the pole in a vise and cut carefully till you just pierce through the tube a bit. Rotate tube. Cut a bit, repeat. Touch up the sharp edges with fine file, sandpaper,...
- Sun Sep 15, 2019 11:23 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Retaining Barrel Nuts in Hatch Covers.
- Replies: 13
- Views: 12708
Re: Retaining Barrel Nuts in Hatch Covers.
Hi Ratking Are you saying that the female and male ends are unscrewing and then the female part falls out of the hole in the cover? That’s how I’m envisioning what the problem is, because that’s the only way the female “barrel” would fall out. Normally the two ends would be screwed firmly together. ...
- Sat Sep 14, 2019 8:23 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1983 Montauk 17 Re-fastening RPS to Deck
- Replies: 13
- Views: 14133
Re: 1983 Montauk 17 Re-fastening RPS to Deck
It's too late now but you could have used T nuts made from stainless on the plywood section you made before you put it back in. In hindsight that is so obvious and elegant and simple, it is brilliant. Hopefully it helps the next person avoid a “palm to forehead” slap moment. All these ideas and obs...
- Fri Sep 13, 2019 8:00 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1983 Montauk 17 Re-fastening RPS to Deck
- Replies: 13
- Views: 14133
Re: 1983 Montauk 17 Re-fastening RPS to Deck
Thanks for he replies and thoughts. A couple answers to your comments. 1. The puck method is described here and is used where there is a backer. The problem with the plywood backer is that it is thin--only 1/2-inch and plywood has poor holding strength compared to wood and much poorer compared to ep...
- Thu Sep 12, 2019 10:26 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1983 Montauk 17 Re-fastening RPS to Deck
- Replies: 13
- Views: 14133
1983 Montauk 17 Re-fastening RPS to Deck
The reversible pilot seat (RPS) fasteners on my recently purchased 1983 Montauk 17 had loosened over time and the plywood substrate rotted. A 4-foot by 4-foot area of the deck was replaced where the RPS sits. Now I need to re-fasten the RPS to the deck. On my boat, the RPS is fastened to the deck wi...
- Wed Sep 11, 2019 8:31 pm
- Forum: The GAM
- Topic: Checklist for Buying Classic 17-footer
- Replies: 8
- Views: 11250
Re: Checklist for Buying Classic 17-footer
This article is very informative. I did a lot of research and talked to a couple well respected accredited surveyors that confirmed what this guy says. I didn’t buy a meter. Go with what Phil T said. http://www.pcmarinesurveys.com/Moisture%20meter%20mythology.htm A few adds: Ask the seller for maint...
- Sat Jul 20, 2019 1:19 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: CAUTION: Montauk 17 Drilling out RPS Deck Fastener Holes
- Replies: 4
- Views: 5764
Re: CAUTION: Montauk 17 Drilling out RPS Deck Fastener Holes
Thanks, biggie. Took your advice and also found the CW FAQ on hull repairs. A little hole expansion (3/16”), a bit of dishing of the area around the hole and roughing it up, and then created a void in the foam area on the inside... then Marine-Tex... voila. Fingers crossed and an offering to Neptune...
- Sat Jul 20, 2019 1:10 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Classic 1983 Whaler Montauk 17 RPS Seat Cushion
- Replies: 5
- Views: 5527
Re: Classic 1983 Whaler Montauk 17 RPS Seat Cushion
Thanks everyone for your replies and information. This is my first Whaler and it’s very helpful to hear other’s experience. My first thought was that there would be a metal or rubber “stop”, fixed to the z-side seat, against which the side arms of the reversible seat would rest. Instead it appears t...
- Mon Jul 15, 2019 9:39 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Classic 1983 Whaler Montauk 17 RPS Seat Cushion
- Replies: 5
- Views: 5527
Classic 1983 Whaler Montauk 17 RPS Seat Cushion
I've searched and can't find the exact answer to my question. Is it normal for the RPS seat cushion on a 1983 Montauk to take a "set" on the forward and aft edges of the cushion due to the seat back sitting and pressing down on the cushion? Hopefully the question makes sense. On my 1983 Mo...
- Thu Jul 11, 2019 8:48 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1988 Johnson 90 V4 VRO Broken Tube on Fixture
- Replies: 3
- Views: 4707
Re: 1988 Johnson V4 VRO 90hp
On the intake manifold parts diagram, could that broken tube be Part 38 - a cut to length "house" (odd name) associated with the "air silencer"? If so, then according to the diagram, part 43, a nipple, looks like it's supposed to be on the end of the "house". Diagram ht...
- Sat Jul 06, 2019 2:02 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: CAUTION: Montauk 17 Drilling out RPS Deck Fastener Holes
- Replies: 4
- Views: 5764
Re: Caution 1983 Montauk 17 Drilling out RPS deck screw holes
Thank you, Jim, that cross section shows exactly what I was trying to describe. Also, please excuse my lack of manners - I meant to thank you for creating and hosting this forum and for doing a GREAT job editing posts and subject lines to make the information shared accessible and understandable.
- Sat Jul 06, 2019 1:37 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: CAUTION: Montauk 17 Drilling out RPS Deck Fastener Holes
- Replies: 4
- Views: 5764
CAUTION: Montauk 17 Drilling out RPS Deck Fastener Holes
My first original post here describing a temporary solution for one problem and seeking advice on creating another problem. Perfectionists, experienced old salts, and newbies, please grab your favorite beverage and pull up a chair. The perfectionists will be horrified with my temporary solution, the...
- Fri Jun 28, 2019 9:11 am
- Forum: MARKETPLACE
- Topic: SOLD - 1986 OUTRAGE 18, $8,500 in New Jersey
- Replies: 21
- Views: 21393
Re: FS: 1986 OUTRAGE 18, $9,500 in New Jersey
I’ll add a small comment to hopefully help. I was on a recent search that became nationwide for a 17 or 18 Outrage. The two problems I had were, of course, how to inspect from afar and how could I reasonably ship a boat to Texas. The price looks reasonable based on the prices I saw. If you acquired ...
- Tue Jun 25, 2019 5:13 pm
- Forum: MARKETPLACE
- Topic: FS: 17 Outrage (SOLD)
- Replies: 1
- Views: 9554
Re: FS: 17 Outrage (SOLD)
I STILL LOVE THIS BOAT!
Sorry for the shouting. WJumper, sent you a hello note via the website. Hope it's made it's way to a great home.
Sorry for the shouting. WJumper, sent you a hello note via the website. Hope it's made it's way to a great home.
- Sat May 25, 2019 11:03 am
- Forum: The GAM
- Topic: Help to Survey Boat in Southeast Houston or Seabrook
- Replies: 1
- Views: 4543
Re: Help to Survey Boat in Southeast Houston or Seabrook
Hi, if my wife allows, I might could look. I will be in Houston later today for a wedding with possibly a chance tomorrow to look. Where is it? Is there an internet link I can look at? I’m not an expert but could take some photos, wiggle the transom, and give you at least one person’s take on whethe...
- Thu May 09, 2019 6:53 pm
- Forum: MARKETPLACE
- Topic: FS: Outrage 18 Stern Seat, Stainless Steel Legs $100
- Replies: 10
- Views: 13915
Re: FS: Outrage 18 Stern Seat, Stainless Steel Legs $100
This is killing me. I’m about to close on an Outrage 18 that lacks the stern seat, and I want one. But I am in Texas. If I arranged for pickup, packing, and shipping, would you consider it? If I found that it would go for a couple hundred in shipping I’d likely do it if you would. Lacking that I hav...
- Tue May 07, 2019 7:56 pm
- Forum: The GAM
- Topic: On Board Hand Tools
- Replies: 17
- Views: 12666
Re: On Board Hand Tools
My first post, so thank you to the host, Jim, and the contributors who have all helped me research my way into identifying a BW as my next (power) boat. I’ve been (power) boatless for a while. Tools onboard a boat, fresh or salt, like everything else on board, the boat itself, and the trailer if app...