This is a bummer, I just put two E-TEC G2 150-HP engines on my boat.
Will this affect the warranty?
Search found 8 matches
- Wed May 27, 2020 7:02 pm
- Forum: The GAM
- Topic: BRP Ending Production of Evinrude E-TEC
- Replies: 58
- Views: 23637
- Tue May 05, 2020 3:55 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1989 OUTRAGE 22 Fuel Tank Replacement
- Replies: 8
- Views: 4619
1989 OUTRAGE 22 Fuel Tank Replacement
A gentleman has a custom 85-gallon fuel tank made up for his [1987--always use four digits for years] OUTRAGE 20. The tank fits in the fuel tank cavity space with room to spare. He achieved [the increase in volume capacity to 85-gallons from the usual 77-gallons] by making the entire tank 3-inches w...
- Tue Apr 21, 2020 12:20 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1989 22 Outrage Drain
- Replies: 2
- Views: 1399
1989 22 Outrage Drain
[Wonders if there is information available about the brass tubing drains on a 1989 OUTRAGE 22.]
- Tue Feb 18, 2020 9:14 am
- Forum: PERFORMANCE
- Topic: 1989 22 Outrage Whaler Drive: Re-power with Twin E-TEC G2 150-HP
- Replies: 11
- Views: 5576
1989 22 Outrage Whaler Drive: Re-power with Twin E-TEC G2 150-HP
[As a follow-up to an earlier thread discussing maximum engine weight for a 22 Whaler Drive boat] I wanted to let everyone know I installed two new E-TEC G2 three-cylinder 150-HP engines on my 1989 Outrage 22 Whaler Drive boat. The boat runs like a champion and is super smooth and dry. [The combined...
- Tue Feb 18, 2020 8:44 am
- Forum: The GAM
- Topic: Outrage 22 WD Super Console T-Top Cover
- Replies: 5
- Views: 2610
Outrage 22 WD Super Console T-Top Cover
Hello. I have a 1989 Outrage 22 Whaler Drive with the Super Console and a T-Top. I recently fitted [twin] E-TEC G2 three-cylinder 150-HP engines. http://continuouswave.com/forum/download/file.php?id=5325 I want to buy a boat cover that would work in a dry stack, probably using sand bags instead of s...
- Thu Nov 14, 2019 10:20 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Circular Cover Plate with Three Holes to Match Railing Stanchion Base
- Replies: 1
- Views: 1385
Circular Cover Plate with Three Holes to Match Railing Stanchion Base
I plan to remove the bow rail on my 1989 OUTRAGE 22. I want to retain the option to re-install it in the future. To that effect I have been looking (unsuccessfully) to find a source of small stainless steel disks that would cover the circular areas where the bow rail attaches to the gunwale and has ...
- Thu Nov 14, 2019 11:45 am
- Forum: PERFORMANCE
- Topic: 1989 22 Outrage with Whaler Drive: Outboard Weight Capacity
- Replies: 6
- Views: 4297
Re: 1989 22 Outrage with Whaler Drive: Outboard Weight Capacity
Jim--Thanks so much for the [collected] knowledge. ASIDE: ASIDE: If I were going to re-power a 22-foot hull with Whaler Drive with twin 150-HP engines, I would get the new E-TEC.. I live down in Charleston and have always heard horror stories about the e-tec's especially the gen 1's have they been a...
- Wed Nov 13, 2019 10:22 pm
- Forum: PERFORMANCE
- Topic: 1989 22 Outrage with Whaler Drive: Outboard Weight Capacity
- Replies: 6
- Views: 4297
1989 22 Outrage with Whaler Drive: Outboard Weight Capacity
[ Q1: What is the maximum allowed engine weight specification for a 1989 OUTRAGE 22 Whaler Drive?] BACKSTORY: I found maximum weight capacity of the OUTRAGE 22 Whaler Drive as 2,655-lbs and the max power as 300-HP. I can not find the max allowable engine weight. Hello everyone. First post here. I ha...