Search found 9 matches

by azegarra43
Mon Feb 08, 2021 10:11 pm
Forum: REPAIRS and MODIFICATIONS
Topic: 1998 17 OUTRAGE II: Wire Path for Bow Trolling
Replies: 7
Views: 573

Re: 1998 17 OUTRAGE II: Wire Path for Bow Trolling

Continuous Wave Family, Here is my update on my 36-Volt Minn-Kota TERRANOVA saltwater trolling motor installation on my 1998 17 Outrage II. TM-mount_.jpg Note I had to remove the OEM bow railing, and I am now in the process of fabricating a new bow railing. TM_WirePath.jpg TM-wiring-2_.jpg Everythin...
by azegarra43
Fri Jan 22, 2021 1:02 am
Forum: REPAIRS and MODIFICATIONS
Topic: 1998 17 OUTRAGE II: Wire Path for Bow Trolling
Replies: 7
Views: 573

1998 17 OUTRAGE II: Wire Path for Bow Trolling

Give me recommendations on routing the [bow] trolling motor wiring to the console on a 1998 17 OUTRAGE II.

I don’t have much to work with and want to try to get the [power outlet connector] as close as possible to the trolling motor.
by azegarra43
Mon Dec 21, 2020 4:47 pm
Forum: PERFORMANCE
Topic: 17 OUTRAGE II Yamaha I-4 V MAX SHO® 115
Replies: 10
Views: 728

Re: 17 OUTRAGE II Yamaha I-4 V MAX SHO® 115

[The new engine model designation] is the VF115 SHO [but Yamaha refers to it as a VF115LA--Moderator]. I just finished the break-in period. [In the future] I will be performing [the factory specified] 20-hour-service; currently [the new engine has] 13 hours [running time]. The previous 130-HP two-st...
by azegarra43
Mon Dec 21, 2020 1:55 pm
Forum: PERFORMANCE
Topic: 17 OUTRAGE II Yamaha I-4 V MAX SHO® 115
Replies: 10
Views: 728

17 OUTRAGE II Yamaha I-4 V MAX SHO® 115

I have a 1998 17 Outrage II with a new Yamaha [that was later clarified to be an I-4 V MAX SHO 115]; it replaced a 1998 Yamaha 130-HP two-stroke-power-cycle engine. I chose the [Yamaha I-4 V MAX SHO 115] due to [concern about too much] transom weight. I wanted to stay within specification. Boston Wh...
by azegarra43
Fri Jun 12, 2020 12:56 am
Forum: REPAIRS and MODIFICATIONS
Topic: REVENGE 22 W-T Using Two 22-gallon On-Deck Tanks
Replies: 5
Views: 848

Re: REVENGE 22 W-T Using Two 22-gallon On-Deck Tanks

If [the REVENGE 22 W-T] has an aluminum tank I would replace it yourself.

I am in the process of replacing a fuel tank on a different boat. See

http://continuouswave.com/forum/viewtopic.php?f=6&t=5505#p32017
by azegarra43
Thu Jun 11, 2020 8:04 pm
Forum: REPAIRS and MODIFICATIONS
Topic: 1998 OUTRAGE 17 Fuel Leak
Replies: 9
Views: 1521

Re: 1998 OUTRAGE 17 Fuel Leak

The process of removing the fuel tank from the hull was not too bad. I used flat-blade screwdriver pushed through the foam all around the tank. This took time but was not hard. The OEM fuel tank depth is onLY 6-inches on the outside edges. The fuel tank has a v-bottom shape that matches the fuel tan...
by azegarra43
Wed Jun 10, 2020 10:01 pm
Forum: REPAIRS and MODIFICATIONS
Topic: 1998 OUTRAGE 17 Fuel Leak
Replies: 9
Views: 1521

Re: 1998 OUTRAGE 17 Fuel Leak

17OUTRAGE_FuelTank.jpg I pulled out the fuel tank and ordered another one from Vince at American Tanks in San Diego. The cost is $840 for the new tank and peace of mind. Also I am installing a new fuel line and filler hose. Thanks for all the advice and info. I do have one last question: Should I u...
by azegarra43
Tue Jun 09, 2020 11:10 am
Forum: REPAIRS and MODIFICATIONS
Topic: 1998 OUTRAGE 17 Fuel Leak
Replies: 9
Views: 1521

Re: 1998 OUTRAGE 17 Fuel Leak

Thanks to everyone for the help. I am looking for a local mechanic for a pressure test on the fuel tank, and for replacement of fuel hoses. I will post results.
by azegarra43
Tue Jun 09, 2020 12:28 am
Forum: REPAIRS and MODIFICATIONS
Topic: 1998 OUTRAGE 17 Fuel Leak
Replies: 9
Views: 1521

1998 OUTRAGE 17 Fuel Leak

I bought [a 1998 OUTRAGE 17] boat from an owner who had the boat sitting for eight years. I notice fuel at the bottom [of the bilge ] when I opened the bilge . I unscrewed a drain plug on the forward wall of the bilge and more came out. Is a new fuel tank needed? To determine if a new fuel tank is n...