CONTINUOUSWAVE

I have a NEWTAUK—-a NEWPORT with a center console. The advantage to the Newport cap is that it has lots of storage for fenders. To remove it would require removing the rub rail that probably has lots of rivets in it, then many screws that hold the lower parts of the cap, and then you'd need a MONTAU...

I have a 1987 Newtauk (Newport with center console) - Mills Canvas recently made me a mooring cover for it using the Newport patterns. Turns out it's too tight to fit properly over the console. Mills will modify it but needs both a Newport and a Montauk console measurement. I can obviously measure t...

I have an [1987-ALWAYS USE FOUR DIGITS FOR YEAR] MONTAUK-NEWPORT hybrid [“NewTauk”] with Teleflex NFB mechanical cable steering with a new 2020 E-TEC 90 mounted one-hole-up. The NewTauk is easy to steer out of the water and at idle, but it gets very hard to steer at engine speeds of 1500 to 5200 RPM...

Phil T, We're talking about the same thing: it's the anti-ventilation plate and it's right at the surface of the water when planing with spray around it—not dry. And I think that's correct. The propeller is as new as the engine—not even an hour on both yet. I'll have the boat in the water later this...

Phil T. Thanks for the response. Just in answer to your first question - I think it's generally accepted on here (see the Sakonnet post below) that 5000 to 5200 is ideal. Youre correct about the 5000 to 5500 recommendation. And thanks for the prop input. Reason I posted is that this boat is differen...

[An E-TEC 90-HP outboard engine is model number ] E90DPGLAFD] [and also has a number] 5493829 [associated with it]. Boston Whaler 1987 Newport has a Montauk center console. [This is known as a NEWTAUK—Moderator] I recently bought this boat and re-powered it with an E-TEC 90. I previously had a 1979 ...