Search found 43 matches

by Seahorse
Wed Jun 03, 2020 5:55 pm
Forum: The GAM
Topic: Relationship Between Evinrude and Suzuki in Four-Stroke Outboard Engines
Replies: 8
Views: 6042

Re: Relationship Between Evinrude and Suzuki in Four-Stroke Outboard Engines

Note the 2004 shift away from Suzuki occurred within a year of Bombardier selling BPR to an investor group led by Bain Capitol. That time was the expiration of the Suzuki contract, nothing to do with Bain. Because BRP was selling more Suzukis than Suzuki USA did, there were unreasonable demands put...
by Seahorse
Sat Nov 16, 2019 10:56 pm
Forum: The GAM
Topic: E-TEC 140-HP G2: A Closer Look
Replies: 27
Views: 28213

Re: E-TEC 140-HP G2: A Closer Look

by Seahorse
Sat Nov 16, 2019 6:44 am
Forum: The GAM
Topic: E-TEC 140-HP G2: A Closer Look
Replies: 27
Views: 28213

Re: E-TEC 140-HP G2: A Closer Look

Cooling System The most noticeable change in the new E-TEC G2 1.9-liter engines cooling system is the provision of a hose at the front of the engine cowling for attachment of an adaptor (if desired) to permit easy connection of a garden hose. This will allow freshwater flushing of the engine withou...
by Seahorse
Tue Nov 12, 2019 11:19 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Rage 15: Engine Will Not Start Due to Fuel Malfunction
Replies: 6
Views: 3631

Re: Rage 15: Engine Will Not Start Due to Fuel Malfunction

Can you feel the manual primer pump pressurize the engine's fuel system? That is your first step for troubleshooting the fuel system if you are sure that is the culprit. Secondly, have you determined if the electric primer is operational? It delivers fuel to the intake manifold when the key is pushe...
by Seahorse
Wed Oct 30, 2019 5:54 pm
Forum: REPAIRS and MODIFICATIONS
Topic: RACOR Fuel Filter Clear Bowl Falls Off
Replies: 9
Views: 12223

Re: RACOR Fuel Filter Clear Bowl Falls Off

Here is the link to the Racor bulletin about the change in bowl material.

https://www.parker.com/Literature/Racor ... ilters.pdf
by Seahorse
Tue Oct 22, 2019 5:03 pm
Forum: The GAM
Topic: BASS & WALLEYE BOATS Magazine
Replies: 6
Views: 16993

Re: BASS & WALLEYE BOATS Magazine

Outboard engine manufacturers have done head-to-head comparison testing on the same boat. Evinrude presented a motion-picture and sound recording of their engine mounted with a competitor's engine on a twin engine boat. They showed how the Evinrude engine could put the boat on plane by itself but t...
by Seahorse
Fri May 17, 2019 8:52 am
Forum: The GAM
Topic: XD50 Oil
Replies: 8
Views: 8988

Re: XD50 Oil

An online site has also replaced the XD30 with XD50. They said this: We have replaced XD30 with XD50, all clients using XD30 should now purchase XD50. XD50 is a superior TCW3 alternative. From your description, it sounds more like the website, not Evinrude, is no longer carrying XD30 and wants you ...
by Seahorse
Wed Mar 27, 2019 7:22 am
Forum: REPAIRS and MODIFICATIONS
Topic: 210 OUTRAGE Replacing Scuppers
Replies: 9
Views: 7234

Re: 210 OUTRAGE Replacing Scuppers

Here is a tool that I have used for years in tight places for tightening scupper nuts.

https://www.homedepot.com/p/Husky-Adjus ... /304217578
by Seahorse
Mon Jan 21, 2019 8:13 am
Forum: The GAM
Topic: Cost Comparison Yamaha and Suzuki Re-power
Replies: 12
Views: 7253

Re: Cost Comparison Yamaha and Suzuki Re-power

Suzuki has promotion now that includes a six year warranty Be aware that it is not a warranty for 6 years. Suzuki only warrants the motor for the first 3 years and the remaining 3 years of coverage are administered by a service contract company, not Suzuki. The administrator is CornerStone United, ...
by Seahorse
Wed Jan 02, 2019 9:45 am
Forum: The GAM
Topic: 1963 Boston Whaler ad
Replies: 2
Views: 3106

1963 Boston Whaler ad

1963 Boston Whaler ad.JPG
1963 Boston Whaler ad.JPG (91.7 KiB) Viewed 3106 times
by Seahorse
Tue Dec 18, 2018 9:18 am
Forum: PERFORMANCE
Topic: XD100 instead of TCW3 Oil in Older Engine
Replies: 10
Views: 13832

Re: XD100 instead of TCW3 Oil in Older Engine

Johnson and Evinrude started recommending the 50:1 fuel-oil mixture in there 1964 and later engines. Several oil companies made a special outboard oils since the mid '50s that had less carbon formation than the 30 grade non-detergent automotive oils. Remember back then most service manuals recommend...
by Seahorse
Sat Oct 06, 2018 9:29 am
Forum: REPAIRS and MODIFICATIONS
Topic: E-TEC Engine: Maintenance History After Ten Seasons
Replies: 23
Views: 13418

Re: E-TEC Engine: Maintenance History After Ten Seasons

At idle your exhaust temperatures are relatively low. While on plane with the anti-ventilation plate is on the surface of the water, both motors would have the exhaust extensions at the same elevation out of the water. Did your exhaust pressure sensor tube show signs of burning up from extremely hig...
by Seahorse
Fri Oct 05, 2018 11:38 pm
Forum: REPAIRS and MODIFICATIONS
Topic: E-TEC Engine: Maintenance History After Ten Seasons
Replies: 23
Views: 13418

Re: E-TEC Engine: Maintenance History After Ten Seasons

That is a great post about the servicing history of your Evinrude E-TEC. It is proof that the E-TEC engines require less maintenance than older traditional outboards and the popular 4-strokes of today. In your post you mentioned " In-hose filter at EMM Cooling Return Line to Vapor Separator and...
by Seahorse
Tue Jul 10, 2018 9:37 am
Forum: PERFORMANCE
Topic: Nantucket 190 E-TEC G2 prop selection
Replies: 3
Views: 4761

Re: Nantucket 190 ETEC G2 prop selection

That [mentioned advice about height of the anti-ventilation plate relative to the water flow around it] is correct.

On most planing boats an E-TEC G2 can be mounted two-holes higher than the former engine was mounted.
by Seahorse
Tue Jul 10, 2018 7:39 am
Forum: PERFORMANCE
Topic: Nantucket 190 E-TEC G2 prop selection
Replies: 3
Views: 4761

Re: Nantucket 190 ETEC G2 prop selection

Check out the RX-4 propeller series, they are remarkable on most boats. Speed is good and the motors may be mounted higher for less drag.
by Seahorse
Fri Jun 22, 2018 12:10 pm
Forum: SMALL BOAT ELECTRICAL
Topic: OMC – Key-on alarm not working, other alarms OK - SOLVED
Replies: 3
Views: 8075

Re: OMC – Key-on alarm not working, other alarms OK

Did the horn previously give a short beep when the key was first turned on?

Does your warning horn have a separate black ground wire hooked up, or only the tan and purple-violet wires and no black wire?
by Seahorse
Thu Feb 01, 2018 8:59 am
Forum: PERFORMANCE
Topic: MONTAUK 17 Re-power with Suzuki DF60AV
Replies: 29
Views: 23330

Re: New Engine Purchase Advice

I have a 1966 16 Boston Whaler with a 2013 production E-TEC 60...On a couple of occasions I have had four or five people in the [c.1966 16-footer], or a load of gear for a week on an island, and the 60-HP was not adequate to efficiently push [the 16-foot Boston Whaler] onto plane or onto plane at a...
by Seahorse
Thu Jul 06, 2017 8:52 am
Forum: REPAIRS and MODIFICATIONS
Topic: 1989 Evinrude 225 No Spark
Replies: 14
Views: 10478

Re: 1989 Evinrude 225

Connections are under the CDI pack. Exercise care when testing the timer base, it is easily damaged electronically if you do something wrong.
by Seahorse
Sun May 28, 2017 7:28 am
Forum: The GAM
Topic: Memorial Day Thanks
Replies: 10
Views: 7226

Re: Memorial Day Thanks

Image
by Seahorse
Sun Apr 16, 2017 11:49 pm
Forum: REPAIRS and MODIFICATIONS
Topic: c.1980 Johnson 50 Tiller Handle Wiring
Replies: 4
Views: 3726

Re: Johnson 50 horse power tiller handle wiring

What is the model number of your 50 hp?

A white wire for the starter circuit has not been used since I believe the late 1960s. Where did you get that harness and from what engine?
by Seahorse
Sat Oct 01, 2016 7:43 am
Forum: PERFORMANCE
Topic: April Fool's Article on Propeller
Replies: 4
Views: 4708

Re: ASIDE: Old April Fool's Article

I think that was published about 14 days before my income taxes were due
by Seahorse
Fri Sep 30, 2016 7:35 am
Forum: PERFORMANCE
Topic: Evinrude RX-4 Propeller and TBX Hub Kits
Replies: 7
Views: 8251

Re: Evinrude RX-4 Propeller and TBX Hub Kits

BRP has the propellers cast to their specifications by several companies that specialize in that.
by Seahorse
Fri Sep 16, 2016 5:46 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Evinrude 175 RAM Ficht - Code 22 assistance
Replies: 3
Views: 3645

Re: Evinrude 175 RAM Ficht - Code 22 assistance

Since the motor is a '99 , the powerhead is NOT a 2000 according to the software report. A 2000 175 engine is completely different. If the EMM overheated, you would get a CHECK ENGINE light, not a HOT light. With overheating problems, replace the whole factory pump assembly, not just an impeller. Mo...
by Seahorse
Fri Sep 16, 2016 1:22 pm
Forum: REPAIRS and MODIFICATIONS
Topic: 2010 E-TEC 225 Exhaust Overheat
Replies: 16
Views: 13792

Re: 2010 E-TEC 225 Exhaust Overheat

Wouldn't it be a lot cheaper and quicker to replace the M2 gearcase with an M1 gearcase which does not have the forward open water inlet holes?

i will bet you could find CWers here and even dealers who who do a swap with you
by Seahorse
Wed Sep 14, 2016 6:45 pm
Forum: REPAIRS and MODIFICATIONS
Topic: 2010 E-TEC 225 Exhaust Overheat
Replies: 16
Views: 13792

Re: 2010 E-TEC 225 Exhaust Overheat

I am aware of that concern. I run a 17 pitch prop and empty it will turn over 6000 RPM. I rarely ever run over 5200. I have tried a 15 and a 13 and it over revs. Have you removed the exhaust sensor nipple for inspection lately? If it is burned away, you may be lugging the motor. It may be a good id...
by Seahorse
Wed Sep 14, 2016 7:53 am
Forum: REPAIRS and MODIFICATIONS
Topic: 2010 E-TEC 225 Exhaust Overheat
Replies: 16
Views: 13792

Re: 2010 E-TEC 225 Exhaust Overheat

Be sure to include the engine serial number and the name of your servicing dealer in your correspondence

Customer Service - After Sales Support
BRP US Inc. / Marine Propulsion Systems,
After Sales Support,
P.O Box 597,
Sturtevant, WI 53177,
1- 844-345-4277

You can also email at brp.care@brp.com
by Seahorse
Thu Sep 08, 2016 7:35 am
Forum: REPAIRS and MODIFICATIONS
Topic: Johnson 120 Looper Idle and Spark Plugs
Replies: 3
Views: 3659

Re: Johnson 120 Looper Idle and Spark Plugs

Yes, .030" is the correct gap but the biggest problem is water on the sparkplugs. How did it get there?

Is the fuel supply suspect or are there internal engine problems?
by Seahorse
Sat Aug 27, 2016 6:58 pm
Forum: REPAIRS and MODIFICATIONS
Topic: 115 Ficht Engine NO OIL Alarm
Replies: 4
Views: 4463

Re: 115 Ficht Engines

First we have to know which 115 HP FICHTs that you have. They are not "all the same." What is the model number on the affected engine?
by Seahorse
Mon Aug 01, 2016 8:54 pm
Forum: PERFORMANCE
Topic: Outrage 25 E-TEC 300 G2
Replies: 12
Views: 9802

Re: Outrage 25 E-TEC 300 G2

An 18" RX4 prop may be a good one to try. They are amazing propellers in many cases.
by Seahorse
Wed Jun 22, 2016 12:58 am
Forum: REPAIRS and MODIFICATIONS
Topic: E-TEC 75 rigging with ICON Basic Tachometer
Replies: 7
Views: 5176

Re: E-TEC 75 rigging with ICON Basic Tachometer

Thanks. I guess I have to go buy a NMEA cable. Does this one look right? https://www.amazon.com/Lowrance-Evinrude-Engine-Interface-Cable/dp/B0017SHX4U I thought my gauge was 4" because thats what it says on the label. Again Thanks That is only one of the several cables and accessories that you...
by Seahorse
Fri Jun 10, 2016 2:44 pm
Forum: REPAIRS and MODIFICATIONS
Topic: 1989 Johnson 40 hp 2 stroke idle problems
Replies: 15
Views: 14271

Re: 1989 Johnson 40 hp 2 stroke idle problems

That 2 cylinder design would often scuff the bottom piston, especially if run with a stuck open thermostat or without one. Compression readings may test OK but the scuffed piston could be discovered by performing a leakdown test. Two other items that affect the low speed operation when everything el...
by Seahorse
Sat Jun 04, 2016 7:01 am
Forum: The GAM
Topic: Evaluating E-TEC Engine on basis of hours and PSI
Replies: 17
Views: 9733

Re: Evaluating E-TEC Engine on basis of hours and PSI

I would like to add a tid-bit to this operating hours discussion. Last year the Catalina Island harbor patrol changed out two E-TEC 150's, each with well over 6,000-hours running time with mostly original parts. New E-TEC 150's with digital controls were installed on those two boats for re-power to ...
by Seahorse
Tue May 31, 2016 8:39 pm
Forum: REPAIRS and MODIFICATIONS
Topic: 1976 Johnson 70-HP Workhorse Giving Me Fits
Replies: 34
Views: 26193

Re: 1976 Johnson 70-HP Workhorse Giving Me Fits

Have you monitored the fuel pressure througout the RPM range?
by Seahorse
Tue Apr 19, 2016 4:25 pm
Forum: SMALL BOAT ELECTRICAL
Topic: Engine fuse blowing, sometimes
Replies: 6
Views: 6061

Re: Engine fuse blowing, sometimes

You can remove the purple wire from the keyswitch to eliminate the gauges and engine components. If it blows when priming remove purple-white wire and retest. if it still blows fuses there is a keyswitch problem. You said that it did not blow while cranking the motor, that is the yellow-red wire
by Seahorse
Mon Apr 18, 2016 1:32 am
Forum: SMALL BOAT ELECTRICAL
Topic: Engine fuse blowing, sometimes
Replies: 6
Views: 6061

Re: Engine fuse blowing, sometimes

That fuse feeds 12v through the red wire to the keyswitch which in turn feeds the 12v to the purple wire for gauges, accessories if installed, and power back to the motor when the key is ON. Look closely under the dash at the gauge wiring and connections and for any chafing or rubbing of the harness...
by Seahorse
Tue Jan 19, 2016 10:34 am
Forum: The GAM
Topic: John Greviskis Throws Evinrude Under the Bus
Replies: 31
Views: 29225

Re: John G. throws Evinrude under the bus!

I agree with Seahorse. I have not been able to find a link to the full episode where the bad mouthing takes place. Has anyone found a link[?] See the introductory remarks in this episode: https://www.youtube.com/watch?v=-cfQmPb-Oy8#t=30 His Evinrude comments start about one minute into the video [F...
by Seahorse
Tue Jan 19, 2016 8:42 am
Forum: The GAM
Topic: John Greviskis Throws Evinrude Under the Bus
Replies: 31
Views: 29225

Re: John G. throws Evinrude under the bus!

It is very surprising that a known figure like John Greviskis would specifically bad-mouth a product of any type so harshly. Whether he was encouraged to by Yamaha or if he did it on his own, he burned bridges behind him. Large companies are very fickle where they elect to spend their marketing doll...
by Seahorse
Sun Jan 17, 2016 3:42 pm
Forum: The GAM
Topic: John Greviskis Throws Evinrude Under the Bus
Replies: 31
Views: 29225

Re: John G. throws Evinrude under the bus!

What episode was this? What was the episode about?
by Seahorse
Tue Jan 12, 2016 7:21 am
Forum: PERFORMANCE
Topic: YAMAHA F70 manufacture date
Replies: 19
Views: 13820

Re: YAMAHA F70 manufacture date

Actually the elimination of yearly models was the brain child of the boat builders. With so many pre-rigged boats from the factories, they needed a way to cut down on year end inventory of motors, especially if they sold fewer boats than forecast. Now the builders can stockpile motors and sell them ...
by Seahorse
Fri Jan 01, 2016 12:19 pm
Forum: REPAIRS and MODIFICATIONS
Topic: VERADO and Hydro-lock
Replies: 21
Views: 21478

Re: VERADO and Hydro-lock

A 2-stroke can run in either direction and the exhaust always expels no matter what the rotation.
by Seahorse
Fri Nov 13, 2015 7:02 am
Forum: REPAIRS and MODIFICATIONS
Topic: VERADO and Hydro-lock
Replies: 21
Views: 21478

Re: VERADO and Hydro-lock

I have not seen this happen in a Verado but several times in Yamaha four-stroke-cycle outboards and the results are the same as well as the sequence of events that lead up to the situation. The hydro-locked four-stroke-cycle outboard engine with bent or broken rods usually show a cam timing error co...