Search found 1608 matches
- Tue May 21, 2024 10:10 am
- Forum: The GAM
- Topic: Boston Whaler 420 OUTRAGE Involved in Tragic Death
- Replies: 9
- Views: 172
Re: Boston Whaler 420 OUTRAGE Involved in Tragic Death
I'm often disgusted by the press, particularly the television press. It seems their goal is not so much to inform as to incite in order to increase viewership. The Boston Whaler owner at the center of this accident is being pilloried because he is wealthy and elderly.
- Thu May 16, 2024 9:41 am
- Forum: The GAM
- Topic: Boston Whaler 420 OUTRAGE Involved in Tragic Death
- Replies: 9
- Views: 172
Re: Boston Whaler 420 OUTRAGE Involved in Tragic Death
Given the robust hull construction of the Outrage and the foam core it is entirely possible the operator would not notice a strike to a small human head. Assuming the boat was on plane the ambient noise level would have masked any noise made from the strike. I seriously doubt the operator was aware ...
- Tue May 14, 2024 9:55 am
- Forum: The GAM
- Topic: Best Practices for Storage
- Replies: 1
- Views: 96
Re: Best Practices for Storage
Consider using a fitted and vented cover. It will provide UV protection and help to keep unwanted critters from nesting in your boat and feasting on upholstery, wiring and rubber tubing. I recommend a cover made of Sunbrella. A good source of a cover is
https://www.carvercovers.com/
https://www.carvercovers.com/
- Mon May 06, 2024 9:20 am
- Forum: MARKETPLACE
- Topic: FS: 1981 Sport 13 in Alabama for $7,700
- Replies: 0
- Views: 122
FS: 1981 Sport 13 in Alabama for $7,700
For-sale a 1982 SPORT 13 with Mercury 30-HP engine on custom-fitted trailer for $7,7000 in Gulf Shores, Alabama. CONTACT: butch6494@gmail.com Age and recent injury forces the sale of this very nice 1982 Sport 13. The boat's bottom is painted with anti-fouling paint for use in this saltwater area. Th...
- Sat May 04, 2024 10:33 am
- Forum: The GAM
- Topic: Max Marine Electronics
- Replies: 0
- Views: 70
Max Marine Electronics
I just saw an article on this subject @ Panbo.com. This company sells used marine electronics. I believe the article is worth a read for the community.
- Wed May 01, 2024 9:05 am
- Forum: The GAM
- Topic: 2002 275 CONQUEST Hull Deadrise, SONAR Transducer
- Replies: 2
- Views: 155
Re: 2002 275 CONQUEST Hull Deadrise, SONAR Transducer
Contact SONAR transducer makers. There are SONAR transducers available for different dead rise hulls and different depth sounder makers. Be prepared to provide that information. The maker of your sounder may be a good starting point. A telephone call is often more effective than email.
- Sat Apr 27, 2024 10:31 am
- Forum: The GAM
- Topic: Trailer for 2000 Dauntless 160
- Replies: 5
- Views: 567
Re: Trailer for 2000 Dauntless 160
As the nation's population grows older and expected lifespans increase lawn services will increase also. You and especially me are pretty good examples.
- Thu Apr 25, 2024 10:09 am
- Forum: The GAM
- Topic: Trailer for 2000 Dauntless 160
- Replies: 5
- Views: 567
Re: Trailer for 2000 Dauntless 160
To find a source for a trailer it's useful to include your location. Aluminum trailers are probably the best selection to minimize corrosion but it's important to ensure the trailer uses high quality stainless steel hardware throughout. A galvanized steel trailer is often selected for it's lower cos...
- Tue Apr 23, 2024 10:13 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Keel Guard for Hulls with Rounded Keel Edge
- Replies: 3
- Views: 521
Re: Keel Guard
You may find a site search useful. I have seen a keel guard used on a small Boston Whaler but don't know what year or model it was.
- Sat Apr 13, 2024 11:03 am
- Forum: The GAM
- Topic: A Custom 15-footer
- Replies: 4
- Views: 448
Re: A Custom 15-footer
That looks like a well thought out conversion to accommodate two anglers.
- Sat Apr 13, 2024 10:59 am
- Forum: The GAM
- Topic: BEARCAT Engine Water Pump Parts
- Replies: 5
- Views: 475
Re: BEARCAT Engine Water Pump Parts
Because the engine was automotive I asked if the pump was engine or gear case mounted. To learn the Bearcat had two pumps much like a typical sterndrive cooling system would not surprise me. We had a 260 Mercruiser sterndrive with closed cooling which had three water pumps. One was located in the dr...
- Thu Apr 11, 2024 9:40 am
- Forum: The GAM
- Topic: BEARCAT Engine Water Pump Parts
- Replies: 5
- Views: 475
Re: BEARCAT Engine Water Pump Parts
If you have exhausted the usual sources ebay may be worth a look.
Q2: Is the water pump engine-mounted or in the lower unit?
If you need an impeller or seal McMaster Carr is worth a look.
Q2: Is the water pump engine-mounted or in the lower unit?
If you need an impeller or seal McMaster Carr is worth a look.
- Fri Apr 05, 2024 10:00 am
- Forum: The GAM
- Topic: Towing Capacity Necessary for 2021 190 Montauk
- Replies: 10
- Views: 1457
Re: Towing Capacity Necessary for 2021 190 Montauk
More towing capacity is not necessarily better. More capacity often requires a more heavy-duty tow vehicle which possibly will require more fuel to operate. It may also require a heaver-duty suspension resulting in a rougher ride for the trailer and cargo. When we purchased our 190 Montauk we travel...
- Thu Apr 04, 2024 9:25 am
- Forum: The GAM
- Topic: Towing Capacity Necessary for 2021 190 Montauk
- Replies: 10
- Views: 1457
Re: Towing Capacity Necessary for 2021 190 Montauk
Q3: do you not trust your vehicle manufacturer's tow rating?
If the vehicle is in good condition use it to tow your Montauk home. Before towing ensure the tires are fully inflated on both your vehicle and the boat trailer.
If the vehicle is in good condition use it to tow your Montauk home. Before towing ensure the tires are fully inflated on both your vehicle and the boat trailer.
- Wed Apr 03, 2024 10:02 am
- Forum: PERFORMANCE
- Topic: 2003 275 Conquest With Twin 300
- Replies: 2
- Views: 723
Re: 2003 275 Conquest With Twin 300
What is too much power? There are thousands of boats successfully operating with more power than the boat is rated for. I believe he weight of the engines is a more critical factor than the horsepower. Horsepower is easily controlled by throttle position.
- Tue Apr 02, 2024 10:22 am
- Forum: PERFORMANCE
- Topic: 1986 OUTRAGE 18 Re-power
- Replies: 10
- Views: 2463
Re: 1986 OUTRAGE 18 Re-power
A change in engine trim can have a significant effect on boat speed as can any change in engine mounting.
- Fri Mar 22, 2024 10:31 am
- Forum: PERFORMANCE
- Topic: 1988 MONTAUK 17 Re-power
- Replies: 5
- Views: 1514
Re: 1988 MONTAUK 17 Re-power
There is virtually no such thing as too much horsepower. There is a problem with an under powered boat. There are things an under powered boat can not do which a boat with enough power can do. An under powered boat is difficult to sell and the selling price would be much lower than expected.
- Fri Mar 15, 2024 9:48 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1981 OUTRAGE 24 Fuel Tank Replacment
- Replies: 3
- Views: 961
Re: 1981 OUTRAGE 24 Fuel Tank Replacment
Q4: are the original tanks defective?
- Sat Mar 09, 2024 10:36 am
- Forum: The GAM
- Topic: My new MISCHIEF 15
- Replies: 24
- Views: 3171
Re: Just got a Mischief 15
[Your new MISCHIEF 15 is a] nice boat and a good find. Q1: can an original equipment boat cover be purchased? No. You won't find any OEM canvas. Carver Covers (http://www.carvercovers.com) makes covers fitted to several different model boats. They also make high quality Bimini tops, some of which wo...
- Fri Mar 08, 2024 11:18 am
- Forum: The GAM
- Topic: Recommend Suitable Boat for Multiple Criteria
- Replies: 6
- Views: 1107
Re: Recommend Suitable Boat for Multiple Criteria
A 160 Dauntless or Dauntless 16 could fit your requirements if it will fit in your garage. A swing-tongue trailer is very useful if storage space is a problem. A trailer can be easily converted to a swing-tongue trailer using a widely available kit. If a Dauntless is being considered I recommend it ...
- Wed Feb 28, 2024 11:08 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 270 DAUNTLESS Rod Holders Flush Mounted
- Replies: 3
- Views: 980
Re: 270 DAUNTLESS Rod Holders Flush Mounted
I recommend stanchion mounted rod holders. To properly install gunwale flush mount rod holders drains should be included. A hard rain can put a lot of water in a holder. It would either need to be removed or allowed to evaporate AND soak into the hull's foam. Flush mount rod holders with covers are ...
- Sun Feb 25, 2024 10:36 am
- Forum: The GAM
- Topic: Choosing between a T-Top and a Canvas Bimini Top
- Replies: 7
- Views: 1217
Re: Choosing between a T-Top and a Canvas Bimini Top
Mas - I agree but would say 80-percent of the center console boats 20 feet and over.
- Wed Feb 21, 2024 10:39 am
- Forum: The GAM
- Topic: Choosing between a T-Top and a Canvas Bimini Top
- Replies: 7
- Views: 1217
Re Choosing between a T-Top and a Canvas Bimini Top
Some boaters like T-Tops because they offer a convenient place to mount a RADAR antenna. Others like T-Tops because they have become something of a status symbol. And finally, many boats are equipped with T-Tops because dealers order so many stock boats with them installed. I prefer Bimini Tops. A r...
- Mon Feb 19, 2024 9:16 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Re-installation of Screw Fastners Into Existing Holes
- Replies: 9
- Views: 1280
Re: Re-installation of Screw Fastners Into Existing Holes
Be aware of the different grades of stainless steel' corrosion resistance before buying.
- Sat Feb 03, 2024 10:20 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: My Plans for a New Interior for a 15-footer; Where to buy L-shaped Brackets
- Replies: 2
- Views: 893
Re: My Plans for a New Interior for a 15-footer; Where to buy L-shaped Brackets
Be aware that KING StarBoard marine plastic lacks strength and may not be the best material to use for thwart seats. It will bend under load. Some form of added reinforcement will be needed.
- Mon Jan 29, 2024 10:28 am
- Forum: PERFORMANCE
- Topic: 1984 SPORT 15 Re-power
- Replies: 12
- Views: 1425
Re: 1984 SPORT 15 Re-power
I would have doubts about advice from a salesman who recommends an engine which needs trim tabs. A properly powered 15 foot boat should not need trim tabs.
Q1: why do you feel a jack plate is needed?
Q1: why do you feel a jack plate is needed?
- Mon Jan 29, 2024 10:17 am
- Forum: SMALL BOAT ELECTRICAL
- Topic: Moving Battery
- Replies: 8
- Views: 1960
Re: Moving Battery
Is there something wrong with the boats' original battery location? That is probably a pretty good battery location. Many Boston Whaler boats have ample room for two batteries in the designed space.
- Sat Jan 27, 2024 10:37 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Overhaul Fuel Delivery on 1987 REVENGE 22
- Replies: 18
- Views: 1696
Re: Overhaul Fuel Delivery on REVENGE 22
Use rubber fuel line approved by the USCG.
- Fri Jan 26, 2024 9:53 am
- Forum: The GAM
- Topic: 1988 SPORT 13 Navigation Lamp
- Replies: 6
- Views: 1430
Re: 1988 SPORT 13 Navigation Lamp
That [bi-color combined sidelights lamp] is a gorgeous piece of jewelry. At $300 it would make a nice anniversary gift for an understanding spouse.
- Fri Jan 19, 2024 10:58 am
- Forum: PERFORMANCE
- Topic: 2001 DAUNTLESS 16 Struggles to Accelerate Onto Plane
- Replies: 9
- Views: 1825
Re: 2001 DAUNTLESS 16 Struggles to Accelerate Onto Plane
We owned a Dauntless 16 for about ten years. It was powered by a 115 HP FICHT 2 stroke engine turning a four blade propeller. The engine was raised to the next to the highest mounting position [two-holes-up]. We found the Dauntless to be a very stable platform once on plane although it was sensitive...
- Wed Jan 10, 2024 10:24 am
- Forum: PERFORMANCE
- Topic: 2001 DAUNTLESS 16 Struggles to Accelerate Onto Plane
- Replies: 9
- Views: 1825
Re: 2001 DAUNTLESS 16 Struggles to Accelerate Onto Plane
I owned a 1999 Dauntless 16 powered by a 115 HP FICHT engine. The FICHT was the predecessor to the E-Tech. My experience was similar to yours. Based on recommendations on this forum I replaced the original 3 blade propeller with a 4 blade propeller and raised the engine mounting height. The improvem...
- Tue Jan 09, 2024 10:52 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2001 DAUNTLESS 16: Adding Bow Mounted Trolling Motor
- Replies: 11
- Views: 2070
Re: 2001 DAUNTLESS 16: Adding Bow Mounted Trolling Motor
Before deciding on how you will install the batteries and wiring for the trolling motor check inside the console for a rigging tunnel running forward from the console. If the tunnel is there it is to facilitate installation of trolling motor wiring. The buyer of our previous 1999 Dauntless 16 wanted...
- Fri Dec 29, 2023 12:15 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Marine Toilet and Windlass for 2000 CONQUEST 23
- Replies: 6
- Views: 1351
Re: Marine Toilet and Windlass for 2000 CONQUEST 23
I assume you are a salt water boater given your use of "Aloha". A boat we owned several years ago had a recirculating toilet with a pump out tank and hoses. Pumping out the effluent and cleaning up the toilet was a very unpleasant chore and required the head and cabin to be well ventilated...
- Thu Dec 21, 2023 10:48 am
- Forum: MARKETPLACE
- Topic: APPRAISAL: 2005 Montauk 170 (repowered)
- Replies: 6
- Views: 1600
Re: APPRAISAL: 2005 Montauk 170 (repowered)
If the new engine includes a transferable factory extended warranty it would increase the value for many buyers.
- Tue Dec 19, 2023 11:17 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 13-foot Hull Modification to Increase Beam
- Replies: 4
- Views: 1245
Re: 13-foot Hull Modification to Increase Beam
A 13 foot donor hull to provide a center section could be an alternative, although the suggestion to simply shorten an Outrage 17 would make more sense as would almost any alternative beginning with "forget about it".
- Thu Dec 14, 2023 10:09 am
- Forum: SMALL BOAT ELECTRICAL
- Topic: Connecting Mercury SmartCraft to a NMEA 2000 Network
- Replies: 6
- Views: 17106
Re: Connecting Mercury SmartCraft to a NMEA 2000 Network
It's been so long since I've dealt with SmartCraft that I'm simply unqualified to offer any useful advice on the system. Sorry.
- Wed Dec 13, 2023 11:20 am
- Forum: SMALL BOAT ELECTRICAL
- Topic: Connecting Mercury SmartCraft to a NMEA 2000 Network
- Replies: 6
- Views: 17106
Re: Connecting Mercury SmartCraft to a NMEA 2000 Network
A major reason I connected my SmartCraft information to an MFD was because the SC1000 gauges were so difficult to use. I never used the gauge(s) after connecting to the MFD.
- Thu Nov 30, 2023 10:37 am
- Forum: The GAM
- Topic: Canvas Vendors
- Replies: 4
- Views: 1291
Re: Canvas Vendors
An excellent manufacturer of bimini tops is Carver Covers, http://www.carvercovers.com . They sell covers with high quality stainless steel bows and hardware and Sunbrella fabric. For something as simple as a console and or seat cover I recommend you use a local fabricator. A local fabricator can ma...
- Fri Nov 24, 2023 10:25 am
- Forum: The GAM
- Topic: PARKIT Trailer Dollies are Having a Black Friday Sale
- Replies: 0
- Views: 1986
PARKIT Trailer Dollies are Having a Black Friday Sale
PARKIT trailer dollies are temporarily priced at some significant markdowns.
Visit http://www.parkit360.com
Visit http://www.parkit360.com
- Fri Nov 24, 2023 10:17 am
- Forum: The GAM
- Topic: Fall Boating Snowbird Migration Underway
- Replies: 4
- Views: 1293
Re: Fall Boating Snowbird Migration Underway
Good to know. Our population will come close to doubling by January. Some city facilities will become overcrowded, our library and fitness center are examples. Parking spaces for shopping will also become more difficult to find.
- Wed Nov 22, 2023 11:27 am
- Forum: The GAM
- Topic: Fall Boating Snowbird Migration Underway
- Replies: 4
- Views: 1293
Fall Boating Snowbird Migration Underway
Yachts and cruisers from Canada and the North continue to travel Southward through the ICW to Florida and points farther South. We wish them good luck and fair weather.
- Mon Nov 13, 2023 10:14 am
- Forum: The GAM
- Topic: Whaler 25 Dimensions
- Replies: 9
- Views: 1578
Re: Whaler 25 Dimensions
Your profile indicates you are on Padre Island, TX. Not all states require a over-wide permit to tow 10-foot-wide loads. Before rejecting a wide boat I would double check with DMV.
- Wed Nov 01, 2023 10:35 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2001 DAUNTLESS 16: Attaching Bracket for Swim Platform
- Replies: 3
- Views: 1105
Re: 2001 DAUNTLESS 16: Attaching Bracket for Swim Platform
Our previously owned Dauntless 16 was equipped with an OEM platform and ladder. It was barely adequate because the single lower step was not deep enough in the water when deployed. Our habit was to use the outboard engine as a booster step when boarding from the water. I recommend you try to find a ...
- Sun Oct 22, 2023 10:41 am
- Forum: The GAM
- Topic: Tesla Boat Trailer Towing
- Replies: 22
- Views: 3821
Re: Tesla Boat Trailer Towing
EV charging networks require careful advance planing before travel,
- Sat Oct 21, 2023 9:50 am
- Forum: The GAM
- Topic: Tesla Boat Trailer Towing
- Replies: 22
- Views: 3821
Re: Tesla Boat Trailer Towing
I suspect a query with Tesla will reveal any salt water towing precautions.
- Sat Oct 21, 2023 9:46 am
- Forum: The GAM
- Topic: Early Layup of 1981 Sport 13
- Replies: 3
- Views: 1533
Re: Early Layup of 1981 Sport 13
Gentlemen, thank you for the encouragement and advice.
- Fri Oct 20, 2023 10:42 am
- Forum: The GAM
- Topic: Early Layup of 1981 Sport 13
- Replies: 3
- Views: 1533
Early Layup of 1981 Sport 13
Since I am now laid up for at least the remainder of the year, I may as well lay-up the 13-foot Boston Whaler. About four weeks ago while on a bicycle ride with my wife I managed to fracture a femur. My age will delay a full recovery so there is little reason to put off the boat storage for the wint...
- Wed Oct 11, 2023 9:55 am
- Forum: The GAM
- Topic: Hull Weight of 1970 SPORT 13
- Replies: 5
- Views: 1333
Re: Hull Weight of 1970 SPORT 13
I believe fresh water weighs around 8.34 pounds per gallon.
- Sat Oct 07, 2023 10:32 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2007 190 Outrage: Cost to Install Electric Trolling Motor
- Replies: 9
- Views: 2923
Re: 2007 190 Outrage: Cost to Install Electric Trolling Motor
Unless I stumble upon a fair price from the start I look for other bids from shops with good reputations. Some Boston Whaler models often sold with a trolling motor option are all constructed with the cable tunnel from the center console to the bow to simplify production. Before cutting on your deck...
- Sat Oct 07, 2023 10:21 am
- Forum: The GAM
- Topic: 2012 130 Super Sport Trailer in Naples, Florida Area
- Replies: 10
- Views: 4962
Re: 2012 130 Super Sport Trailer in Naples, Florida Area
Before deciding which trailer brand is for you, consider these factors: ⋅ If you are boating in saltwater or brackish water, trailer corrosion becomes a very important factor. For boating in freshwater, perhaps trailer corrosion is a little less important. ⋅ Will you be towing ov...