Q1: does [an increase in the engine weight of] 60- to 70-lbs make much difference when considering a repower?
I know this has been discussed here for years but seems like every year the modern engines get lighter. I am asking:
Q2: does [an increase in engine weight by 70-lbs] really matter?
Search found 10 matches
- Sun Apr 09, 2023 12:54 pm
- Forum: PERFORMANCE
- Topic: Compensating for Added Engine Weight
- Replies: 4
- Views: 2682
- Sun Apr 09, 2023 9:03 am
- Forum: PERFORMANCE
- Topic: Compensating for Added Engine Weight
- Replies: 4
- Views: 2682
Compensating for Added Engine Weight
If I move battery to the center console from the transom, will it compensate for increased engine weight on the transom? ASIDE: My 1989 Montauk [ALWAYS MENTION THE TWO DIGIT OR THREE DIGIT LENGTH DESIGNATOR WHEN DESCRIBING A PARTICULAR BOSTON WHALER MODEL] has a Johnson 110-HP engine that is said to...
- Sat Dec 10, 2022 8:20 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: MONTAUK 17 RPS Placement
- Replies: 7
- Views: 1337
Re: MONTAUK 17 RPS Placement
Thanks Markcz. That should do it.
- Sat Dec 10, 2022 8:11 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: MONTAUK 17 RPS Placement
- Replies: 7
- Views: 1337
MONTAUK 17 RPS Placement
I just had the [cockpit deck] of my [1987--ALWAYS USE FOUR DIGITS FOR YEARS] MONTAUK 17 redone. I need to [re-install] the reversible pilot seat. I neglected to measure where its fasteners were located on the deck, and the old fastener holes are now covered. The access hole into the deck for the fue...
- Thu Jul 22, 2021 7:31 am
- Forum: The GAM
- Topic: MONTAUK 17 Stick Pins for Control When Angling
- Replies: 2
- Views: 3224
MONTAUK 17 Stick Pins for Control When Angling
Will manual stick pins control a MONTAUK 17 when angling? BACKSTORY I'm getting my [1987 MONTAUK 17 boat] refurbished. I plan to use the 1987 MONTAUK 17 on the Atlantic Intracoastal Water Way, and fish close to shore on the coast of North Carolina. I was planning on using stick pins or a power pole ...
- Thu Apr 15, 2021 9:27 am
- Forum: PERFORMANCE
- Topic: SUZUKI DF60 Owners Sought For Comments
- Replies: 4
- Views: 4455
Re: SUZUKI DF60 Owners Sought For Comments
Thanks Jimh for referencing that story! Very interesting.
- Thu Apr 15, 2021 6:33 am
- Forum: PERFORMANCE
- Topic: SUZUKI DF60 Owners Sought For Comments
- Replies: 4
- Views: 4455
SUZUKI DF60 Owners Sought For Comments
TO ANYONE WHO HAS REPOWERED A MONTAUK 17 WITH A SUZUKI DF60: please reply to this thread and give information about your experience. BACK STORY: My 1987 MONTAUK [17] boat originally had a Johnson 110-HP engine that always felt too powerful to me, and it weighed 300-lbs. I use my 1987 MONTAUK [17] mo...
- Tue Apr 13, 2021 6:45 pm
- Forum: The GAM
- Topic: Recommend Yamaha Dealer in North Carolina; Gel Coat Repair Vendor
- Replies: 3
- Views: 2795
Recommend Yamaha Dealer in North Carolina; Gel Coat Repair Vendor
Give me a recommendation for a Yamaha outboard engine dealer in North Carolina. Also, give me a recommendation for a vendor in North Carolina to do gel coat work. BACK STORY I want to re-power my 1987 Montauk with a Yamaha 70. I contacted a dealer in Morehead City, North Carolina. This dealer said m...
- Mon Apr 12, 2021 12:48 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1986 Montauk Rot
- Replies: 2
- Views: 1913
Re: 1986 Montauk Rot
I would say the soft areas are about a square foot each, in the rear on each side of the bilge pump.
- Sun Apr 11, 2021 6:17 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1986 Montauk Rot
- Replies: 2
- Views: 1913
1986 Montauk Rot
Should I be concerned about rot in a 1986 MONTAUK? I had have this 1986 Montauk since c.1995 and neglected it many years. I wonder if [the 1986 MONTAUK boat has] rot. In the [stern] on the side opposite the battery, the [cockpit deck] seems to have separated some from the [underlying structure]. The...