Search found 716 matches

by Oldslowandugly
Thu Sep 01, 2022 8:22 pm
Forum: The GAM
Topic: White All-Round PERKO Lamp
Replies: 1
Views: 1270

Re: White All-Round PERKO Lamp

Jim, thanks for that catalogue.pdf. Almost all my lights and electrical things are Perko brand. I would rather restore an original Perko part than waste my time and money on the imported junk available today.
by Oldslowandugly
Mon May 23, 2022 11:55 am
Forum: SMALL BOAT ELECTRICAL
Topic: PMA Alternator: Metal Face Plate on Coil
Replies: 16
Views: 4736

Re: PMA Alternator: Metal Face Plate on Coil

This is the charge oil. What confuses me more is why the larger two cylinder motors need that shield but the smaller ones don't. You would think any benefit would be applicable to all models.
by Oldslowandugly
Mon May 23, 2022 10:47 am
Forum: SMALL BOAT ELECTRICAL
Topic: PMA Alternator: Metal Face Plate on Coil
Replies: 16
Views: 4736

Re: PMA Alternator: Metal Face Plate on Coil

My other cousin replied with this: "Oh you mean that disk in front? OK that is what they call a shunt plate. It is shielding the coil windings from the passing magnet. Hence ‘shunting’ the field as it goes by. That is to sharpen the timing pulse at the center pole. The other two poles are just ...
by Oldslowandugly
Sun May 22, 2022 9:39 am
Forum: SMALL BOAT ELECTRICAL
Topic: PMA Alternator: Metal Face Plate on Coil
Replies: 16
Views: 4736

Re: PMA Alternator: Metal Face Plate on Coil

Thanks for that info Jimh. It is still way above my pay grade.
by Oldslowandugly
Sat May 21, 2022 6:03 pm
Forum: SMALL BOAT ELECTRICAL
Topic: PMA Alternator: Metal Face Plate on Coil
Replies: 16
Views: 4736

Re: PMA Alternator: Metal Face Plate on Coil

Green Bay Propeller sent me the CDI-brand replacement coil; they sent just the coil, not the coil and its laminated core. The the original laminated core must be used with the new coil winding assembly. CDI calls the metal face plate a SHUNT PLATE. If the coil being replaced used a shunt plate, the ...
by Oldslowandugly
Fri May 20, 2022 8:32 pm
Forum: SMALL BOAT ELECTRICAL
Topic: PMA Alternator: Metal Face Plate on Coil
Replies: 16
Views: 4736

Re: PMA Alternator: Metal Face Plate on Coil

jimh wrote:
When you got a new coil with a face plate, have you tested that face plate material to see if it is magnetic?

I tested it. It is very magnetic. Just plain steel but it must be chrome plated. It is very shiny.
by Oldslowandugly
Wed May 18, 2022 6:19 pm
Forum: SMALL BOAT ELECTRICAL
Topic: PMA Alternator: Metal Face Plate on Coil
Replies: 16
Views: 4736

Re: PMA Alternator: Metal Face Plate on Coil

Green Bay Propeller contacted me. They apologized for the dead coil, and they were ordering me a new one. No charge. What service!

I highly recommend this outfit as I have always gotten excellent parts at a very fair price. You hardly ever find such great customer service anymore.
by Oldslowandugly
Tue May 17, 2022 10:46 am
Forum: REPAIRS and MODIFICATIONS
Topic: Painting Vinyl Cushions
Replies: 7
Views: 1180

Re: Painting Vinyl Cushions

Yes Jim, I assumed the same thing, that the OP was asking about the Colorcoat product. I buy it at an old school mom-n-pop auto parts store that carries auto paint and body working supplies. They had the best price and color selection. Also most dedicated auto paint supply shops carry it. I have als...
by Oldslowandugly
Mon May 16, 2022 11:01 am
Forum: REPAIRS and MODIFICATIONS
Topic: Painting Vinyl Cushions
Replies: 7
Views: 1180

Re: Painting Vinyl Cushions

More about [SEM Color Coat aerosol paint]: Many years ago [SEM Color Coat aerosol paint] was advertised as "vinyl dye". [SEM Color Coat aerosol paint] did not actually dye the vinyl and eventually the name changed to [SEM Color Coat aerosol paint], but [SEM Color Coat aerosol paint] is the...
by Oldslowandugly
Sun May 15, 2022 8:16 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Painting Vinyl Cushions
Replies: 7
Views: 1180

Re: Painting Vinyl Cushions

The [way to have success when applying SEM Color Coat aerosol paint to paint old vinyl cushions] is to clean, clean, clean [the old vinyl cushions before applying the new SEM Color Coat aerosol paint]. [There can be] no dirt or oils on the [vinyl cushions]. [Apply SEM Color Coat aerosol paint] on a ...
by Oldslowandugly
Sun May 15, 2022 10:12 am
Forum: SMALL BOAT ELECTRICAL
Topic: PMA Alternator: Metal Face Plate on Coil
Replies: 16
Views: 4736

Re: PMA Alternator: Metal Face Plate on Coil

My other cousin said: All I can think of is a metal core increases the inductance of a coil. Lenz law states and inductor will provide an opposing voltage to a changing field. Where v = -L di/dt. I assume this coil with more [inductance] provides a bit more kick to the ignition pulse. [You can] fabr...
by Oldslowandugly
Sat May 14, 2022 6:44 pm
Forum: SMALL BOAT ELECTRICAL
Topic: PMA Alternator: Metal Face Plate on Coil
Replies: 16
Views: 4736

Re: PMA Alternator: Metal Face Plate on Coil

Just great. I purchased an entire timing plate complete with all the coils, and the charge coil is bad. I contacted Green Bay Prop to see what they can do. One of my cousins got back to me. He feels the steel shield may be to "concentrate, magnetic field energies". His words. Makes some se...
by Oldslowandugly
Fri May 13, 2022 2:29 pm
Forum: SMALL BOAT ELECTRICAL
Topic: PMA Alternator: Metal Face Plate on Coil
Replies: 16
Views: 4736

Re: PMA Alternator: Metal Face Plate on Coil

Yes, the lighting coils are for producing 12 volts to run accessories and recharge the battery. Rope start motors usually lack them but it is not unheard of. The Charge Coil sends voltage to the Capacitor Discharge Ignition(CDI) module. Electronic switching determines which cylinder gets fired. It t...
by Oldslowandugly
Fri May 13, 2022 10:54 am
Forum: SMALL BOAT ELECTRICAL
Topic: PMA Alternator: Metal Face Plate on Coil
Replies: 16
Views: 4736

Re: PMA Alternator: Metal Face Plate on Coil

I am totally confused now. I tested the shards with a magnet and while at first they appeared to be stainless steel, they are not. In fact they are extremely magnetic like mild steel. Would [the face plate being made of ferromagnetic steel] help to expand the exit-able [perhaps excitable] area of th...
by Oldslowandugly
Thu May 12, 2022 10:16 pm
Forum: SMALL BOAT ELECTRICAL
Topic: PMA Alternator: Metal Face Plate on Coil
Replies: 16
Views: 4736

PMA Alternator: Metal Face Plate on Coil

[On an older Evinrude outboard engine the permanent magnet alternator (PMA) stator assembly has a peculiar coil called a] "charge coil" that has a stainless steel [later found to be magnetic steel] faceplate attached to the front of the coil assembly as shown below. [Some other Evinrude ou...
by Oldslowandugly
Wed May 11, 2022 8:47 pm
Forum: SMALL BOAT ELECTRICAL
Topic: Outboard Engine Stator Repair: New Coils
Replies: 7
Views: 3792

Re: Outboard Engine Stator Repair: New Coils

Note the extended solid copper wire is protected by a flexible insulating sheath, which is probably rather heat resistant. Finding where one could get that material is an unknown to me at this moment. I think the heat resistant sheath that they use on stove and oven wiring would do the job. It is a...
by Oldslowandugly
Tue May 10, 2022 7:20 pm
Forum: SMALL BOAT ELECTRICAL
Topic: Outboard Engine Stator Repair: New Coils
Replies: 7
Views: 3792

Re: Outboard Engine Stator Repair: New Coils

JIMH--upon investigation I see that the thin coated wire from the coil does in fact enter the blob (as you suggested) and the thicker marine grade wire exits the blob. The blobs are sealing the connection and securing them against movement. [The blobs are] a hard substance similar to automotive seam...
by Oldslowandugly
Tue May 10, 2022 4:01 pm
Forum: SMALL BOAT ELECTRICAL
Topic: Outboard Engine Stator Repair: New Coils
Replies: 7
Views: 3792

Re: Outboard Engine Stator Repair: New Coils

Here is clear indication that either the charge coil or the motor have over-heated. I have read that either occurrence can cause this melting of the potting material. The coil shows an open circuit so it is unusable. IMG_0405.JPG To allow the charge coil and trigger coil to be removed from the timin...
by Oldslowandugly
Tue May 10, 2022 1:54 pm
Forum: SMALL BOAT ELECTRICAL
Topic: Outboard Engine Stator Repair: New Coils
Replies: 7
Views: 3792

Re: Outboard Engine Stator Repair: New Coils

I took the entire timing plate off. The charge coil has definitely melted and the ohm meter test says open circuit. The trigger coil is OK and the lighting coils on the stator are good too. Just the wiring is crumbling. The original charge coil had a stainless steel faceplate that must have come off...
by Oldslowandugly
Tue May 10, 2022 10:41 am
Forum: SMALL BOAT ELECTRICAL
Topic: Outboard Engine Stator Repair: New Coils
Replies: 7
Views: 3792

Re: Outboard Engine Stator Repair: New Coils

I haven't removed the stator from the timing plate yet. I was hoping that I could splice new wires to the OEM wires right after they exit just under the timing plate. At that spot they seem to be more intact. Testing shows that the coils are not shorted to ground but I need to separate them from the...
by Oldslowandugly
Mon May 09, 2022 6:03 pm
Forum: SMALL BOAT ELECTRICAL
Topic: Outboard Engine Stator Repair: New Coils
Replies: 7
Views: 3792

Outboard Engine Stator Repair: New Coils

I am about to remove the flywheel on my 1996 48SPL to see if I can splice in new stator wire leads. The insulation at the terminals has deteriorated to the point of shorting out. I thought that in case I need to replace the entire stator, I researched buying one. It seems the original design which i...
by Oldslowandugly
Mon May 09, 2022 2:19 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Repair of 1996 OMC 48 SPL Engine
Replies: 14
Views: 1675

Re: Repair of 1996 OMC 48 SPL Engine

Today I tested the two T-n-T relays and a spare I had. All worked fine. OMC used a common relay used in many automobiles that is easily substituted for the expensive and hard to find OMC item. I unscrewed the relay mount from the electrical board. The back side was covered in dirty grease. I sprayed...
by Oldslowandugly
Sun May 08, 2022 10:10 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Repair of 1996 OMC 48 SPL Engine
Replies: 14
Views: 1675

Re: Repair of 1996 OMC 48 SPL Engine

Today I finished fabricating a ground cable for the T-n-T. Since the mounts are insulated by plastic bushings you need a dedicated ground from the T-n-T to the outboard motor body. I used some 10 gauge marine grade wire and stainless steel ring terminals. I soldered and sealed them. Then I connected...
by Oldslowandugly
Fri May 06, 2022 8:40 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Repair of 1996 OMC 48 SPL Engine
Replies: 14
Views: 1675

Re: Repair of 1996 OMC 48 SPL Engine

The rain chased me back down to the basement today so I looked at the T-n-T pump. I drained the oil and tested the motor. There was no noise so I knew the problem must be inside the hydraulic system. The only thing I changed the last time I worked on it was the O-ring on the manual release valve. I ...
by Oldslowandugly
Thu May 05, 2022 7:40 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Repair of Minor Chips
Replies: 4
Views: 767

Re: Repair of Minor Chips

Evercoat 27 is an all purpose polyester filler for fiberglass repairs. The benefit is that it is white in color so it will blend well to most boat hulls. For minor fairing it will be fine. But for stronger repairs I would recommend white Marine Tex which is much stronger than polyester filler. If th...
by Oldslowandugly
Wed May 04, 2022 10:52 am
Forum: The GAM
Topic: Selling Used Outboard
Replies: 7
Views: 1685

Re: Selling Used Outboard

I have sold several old outboard motors on the Craigslist website. Aside from dealing with the "dreamers" that call, I have found that there is a strong market for reasonably priced old outboard motors. The key to a quick sale is being able to demonstrate that it works and comes with every...
by Oldslowandugly
Fri Apr 29, 2022 9:24 am
Forum: REPAIRS and MODIFICATIONS
Topic: 1979 11-footer Water Drain Hole in Bow Locker
Replies: 5
Views: 991

Re: 1979 11-footer Water Drain Hole in Bow Locker

My guess: the hole [that is the topic of this thread in a 1979 11-foot hull] is a factory feature. The lack of any other drain means that the locker would otherwise fill to the brim . The depression at the hole in the locker also indicate [the hole was a made at the factory]. If Boston Whaler used a...
by Oldslowandugly
Thu Apr 28, 2022 3:17 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Rigging 13-footer Center Console
Replies: 9
Views: 1579

Re: Rigging 13-footer Center Console

I painted mine because it was so bad. It is a never-ending chore. After filling in all the holes I did a base coat of Interlux Epoxy two part primer. Then I painted over that with Interlux Interthane Plus, a two part Urethane. You would think that would be indestructible. It was not. It peeled, it c...
by Oldslowandugly
Wed Apr 27, 2022 5:28 pm
Forum: The GAM
Topic: Wasps
Replies: 7
Views: 1227

Re: Wasps

We once drove way up into Connecticut to take body parts from a 1968 Buick LeSabre. Upon arrival we discovered what appeared to be about a million yellowjacket wasps that had taken up residency in the Buick. The owner advised us to merely work slowly and not swing at the wasps. Seeing that we had dr...
by Oldslowandugly
Wed Apr 27, 2022 10:53 am
Forum: The GAM
Topic: Indicators of a 1985 Striper 15
Replies: 2
Views: 637

Re: Indicators of a 1985 Striper 15

The most prominent features of a STRIPER that would leave distinguishable screw holes in the deck of a bare hull are: ⋅ a circular mounting base for a swivel pedestal seat in cockpit slightly aft of amidships ⋅ a molded helm console of modest height located on Starboard--not a &...
by Oldslowandugly
Tue Apr 26, 2022 2:07 pm
Forum: The GAM
Topic: Indicators of a 1985 Striper 15
Replies: 2
Views: 637

Indicators of a 1985 Striper 15

What factors would identify a c.1985 STRIPER 15 model? LONG BACK STORY WITH MANY DETAILS OF AN EXISTING HULL I thought I owned a 1985 SPORT 15, but now I am not sure. The HIN and stencil numbers indicate a 1985 hull. The models for that year were the Sport, Super Sport, Center Console, and Striper. ...
by Oldslowandugly
Tue Apr 26, 2022 12:45 pm
Forum: The GAM
Topic: Wasps
Replies: 7
Views: 1227

Re: Wasps

At my marina they hang traps. Someone must empty them on a regular basis to be effective. https://www.wikihow.com/Make-a-Wasp-Trap
by Oldslowandugly
Sun Apr 24, 2022 11:26 am
Forum: REPAIRS and MODIFICATIONS
Topic: Rigging 13-footer Center Console
Replies: 9
Views: 1579

Re: 13 foot center console conversion (rigging questions)

P7070100.JPG The 13 footer is smaller but a small console like the TODD console seen in Figure 4 should fit well. My biggest complaint about Boston Whaler boats is that the factory seating and console waste too much space. The folding bench stores the gasoline fuel tanks and provides for more seati...
by Oldslowandugly
Sun Apr 24, 2022 11:14 am
Forum: REPAIRS and MODIFICATIONS
Topic: Rigging 13-footer Center Console
Replies: 9
Views: 1579

Re: 13 foot center console conversion (rigging questions)

P7240459_01.JPG The cooler seat was attached the same way. That way I can remove either without disturbing the fiberglass deck. The mahogany wood bench seen in Figure 1 can be raised to access a storage compartment. I store two 6-gallon portable gasoline fuel tanks under it. I have two swivel seats...
by Oldslowandugly
Sun Apr 24, 2022 10:11 am
Forum: REPAIRS and MODIFICATIONS
Topic: Rigging 13-footer Center Console
Replies: 9
Views: 1579

Re: 13 foot center console conversion (rigging questions)

I was in a similar situation with my 15 footer. I fastened a mahogany frame to the deck with screws and adhesives, making sure to waterproof and seal the screw holes. Then I bolted a TODD center console to the frame. The console can be removed by just unbolting it [from the frame]. Rigging cables an...
by Oldslowandugly
Sat Apr 23, 2022 4:31 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Repair of 1996 OMC 48 SPL Engine
Replies: 14
Views: 1675

Re: Repair of 1996 OMC 48 SPL Engine

The first thing I did was to remove the manual release valve. That had an obviously bad O-ring on the section that separated two orifices on the release valve. All I had on hand in that size was an HNBR air conditioning O-ring so I used it. I also removed the UP check valve and it looked clean so I ...
by Oldslowandugly
Tue Apr 19, 2022 5:47 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Repair of 1996 OMC 48 SPL Engine
Replies: 14
Views: 1675

Re: Repair of 1996 OMC 48 SPL Engine

Yes, I was afraid of that. The FSM says to double check the emergency relief down first. If someone messed with it, it could be the problem. Otherwise it will require removing the motor and cleaning everything. At that point I may as well get an O-ring kit and just rebuild it. We shall see.
by Oldslowandugly
Tue Apr 19, 2022 5:20 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Repair of 1996 OMC 48 SPL Engine
Replies: 14
Views: 1675

Re: Repair of 1996 OMC 48 SPL Engine

Another problem. When I raise the motor to the full up position, it slowly lowers back down. I have to check the pump emergency down relief screw to make sure it is tightened to the correct torque.
by Oldslowandugly
Tue Apr 19, 2022 5:13 pm
Forum: REPAIRS and MODIFICATIONS
Topic: 1969 16-footer Paint or Gel Coat
Replies: 7
Views: 1087

Re: 1969 16-footer Paint or Gel Coat

If you have never owned a boat before then an old Whaler is an easy way to get started. A good motor, a portable gas tank, and off you go. With Whalers, old does not mean cheap. They were meant to last a long time and the prices reflect that. But the unsinkable nature of a Whaler is best reason for ...
by Oldslowandugly
Mon Apr 18, 2022 8:38 am
Forum: MARKETPLACE
Topic: APPRAISAL: 1969 16-footer
Replies: 10
Views: 2383

Re: APPRAISAL: 1969 16-footer

The boat [appears to be] very clean all over. The console looks like a TODD brand. I prefer a seat with a back to a leaning post. Railings and navigation lamps would complete it.
by Oldslowandugly
Sun Apr 17, 2022 11:45 am
Forum: REPAIRS and MODIFICATIONS
Topic: OMC Electric Shift
Replies: 4
Views: 1043

Re: OMC Electric Shift

I had a 1972 Evinrude 125-HP outboard engine. I believe that was the last year for the electric shift. That was also the first year for electronic ignition. There were solenoids inside the gearcase that selected the gears. The default position was forward. That way if the electrical system failed th...
by Oldslowandugly
Thu Apr 14, 2022 10:15 am
Forum: REPAIRS and MODIFICATIONS
Topic: 1967 13-footer Bow Eye Repair
Replies: 12
Views: 1760

Re: 1967 13-footer Bow Eye Repair

IMPORTANT in this repair. When filling in the void made by the methods described above, it is a good idea to place a plastic drinking straw to provide a pilot hole to follow when re-drilling the hole for the bow eye. That is probably the smartest idea I have seen in years. [By using the drinking st...
by Oldslowandugly
Wed Apr 13, 2022 10:36 am
Forum: REPAIRS and MODIFICATIONS
Topic: Stainless Steel Hose Clamps on Fuel Lines
Replies: 8
Views: 2004

Re: Stainless Steel Hose Clamps on Fuel Lines

I use stainless steel hose clamps on everything, especially fuel lines. The little plastic tie wraps OMC used from the factory are OK until you touch them and then they are useless. The stainless clamp used on fuel lines usually is OK until it is not. Then I replace with stainless hose clamps. As fo...
by Oldslowandugly
Tue Apr 12, 2022 4:58 pm
Forum: REPAIRS and MODIFICATIONS
Topic: 1967 13-footer Bow Eye Repair
Replies: 12
Views: 1760

Re: 1967 13-footer Bow Eye Repair

The Allen-wrench-approach jimh just described would be the exact definition of "hog out" used at Shadetree Mechanics University.
by Oldslowandugly
Mon Apr 11, 2022 9:33 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Repair of 1996 OMC 48 SPL Engine
Replies: 14
Views: 1675

Re: Repair of 1996 OMC 48 SPL Engine

UPDATE on the [repair of the trim unit]: I temporarily installed the trim unit on the outboard engine. I was lifting and lowering the motor to check the operation with all that weight on it. I heard some squealing sounds and re-checked the oil level. The oil level was OK but I still suspected there ...
by Oldslowandugly
Mon Apr 11, 2022 8:44 pm
Forum: REPAIRS and MODIFICATIONS
Topic: 1967 13-footer Bow Eye Repair
Replies: 12
Views: 1760

Re: 1967 13-footer Bow Eye Repair

To "hog out the hole" means to remove any damaged glass fibers or resin that a moving fastener may have caused. When I replaced a bow eye set I witnessed a lot of damage to the surrounding area due to movement of the bolt. Fiberglass is really called FRP or Fiberglass Reinforced Plastic. T...
by Oldslowandugly
Sun Apr 10, 2022 4:56 pm
Forum: REPAIRS and MODIFICATIONS
Topic: 1967 13-footer Bow Eye Repair
Replies: 12
Views: 1760

Re: 1967 13-footer Bow Eye Repair

I suggest this procedure: ⋅ remove any remains of the bolt ⋅ hog out the hole [enlarge the hole to remove any damaged material] ⋅ fill the hole with fiberglass resin or epoxy resin, which will soak into all the spaces ⋅ or use MarineTex, which may be stronger,...
by Oldslowandugly
Sun Apr 10, 2022 4:42 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Repair of 1996 OMC 48 SPL Engine
Replies: 14
Views: 1675

Re: Repair of 1996 OMC 48 SPL Engine

When the tilt tube is installed correctly there are enough threads on the starboard side to screw the steering cable nut on. If your steering cable is on the port side then leave enough threads on that side. The instructions on the steering cable nut say to screw it on completely and make it tight. ...
by Oldslowandugly
Sun Apr 10, 2022 4:38 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Repair of 1996 OMC 48 SPL Engine
Replies: 14
Views: 1675

Re: Repair of 1996 OMC 48 SPL Engine

Today I mounted the motor mount bracket to the swivel bracket. Forget the big hammer. Use a length of threaded rod, nuts, big washers, and some short spacer pipes so you can press the tilt tube into the brackets smoothly and carefully. Clean and lube the plastic washers and tilt tube with Triple Gua...
by Oldslowandugly
Thu Apr 07, 2022 6:34 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Pettit Trailercoat is now Rustlok
Replies: 0
Views: 2113

Pettit Trailercoat is now Rustlok

I have been using the Pettit Trailercoat brand paint to keep my 1989 Magic Tilt trailer as rust free as possible. It is a moisture cured polyurethane that is extremely durable. It has been discontinued by Pettit and very hard to find. I saw that Pettit makes other rust inhibitor paints so I called t...