CONTINUOUSWAVE

I likely won’t be able to find a “bolt on” option and may not be able to use the OEM swim ladder.

I'll try to work something up.

I will post any results if they’re different from Bob's method.

Thanks for your input.
Mark

Re-read the original article. Note the use of KING StarBoard plastic material to extend the swim ladder further from the transom as seen in the illustration identified as Figure 4 above. I would prefer to mount the [trim] tab under where the ladder currently hangs and extending the OEM hangers will...

[About three and half years later this thread is revived] After reading this post I couldn’t help but follow your lead. I have the switch and wiring installed in my [unclear--please give the year, the model designator, and the length when identifying a Boston Whaler boat model]. I haven’t yet mounte...

Hi Bob I’ve seen your write up. It was a big motivator for me. Tthanks for taking the time to do it. Also, thanks for your response to my question. I had the Baystar lines installed before realizing that I needed a different kit. From memory it seemed to have a good bit of extra tubing length. I hav...

QUALIFIED QUESTION--ONLY FOR THOSE WHO HAVE INSTALLED A SEASTAR HYDRAULIC STEERING KIT or CHANGED THE LENGTH OF A BAYSTAR HYDRAULIC STEERING KIT on a DAUNTLESS 16: Q1: do you agree with my choice of 16-foot lines? BACKSTORY I am currently installing hydraulic steering on my 1999 Dauntless 16. I have...

Thanks for the input gentlemen.


I wasn’t sure if the dealer would allow prop testing as I didn’t know if they would have a problem to sell the undesired ones.

Q1: What is the diameter of an ENERTIA 21-pitch propeller [that fits the gearcase of a 2021 Mercury 115-HP Command Thrust engine]? BACK STORY I have a [1999--always use four digits for years] Dauntless 16, and I just installed a 2021 Mercury 115-HP FOURSTROKE with CommandThrust gear case. [From read...