Search found 180 matches
- Fri Apr 26, 2019 8:56 am
- Forum: SMALL BOAT ELECTRICAL
- Topic: NMEA-0183 Interface: GX2150, a Difficult Example
- Replies: 3
- Views: 15844
Re: NMEA-0183 Interface: GX2150, a Difficult Example
JimH, four conductor shielded cable with white, brown, yellow, and green conductors is quite common in industrial CanBus communication networks. The outer insulation is usually some form of purple. In my humble opinion the talker/ listener nomenclature is crap. I can send you some if you'd like it f...
- Sat Apr 20, 2019 11:22 am
- Forum: SMALL BOAT ELECTRICAL
- Topic: Purchasing Electronics
- Replies: 6
- Views: 10727
Re: Purchasing Electronics
Butch, don't throw Garmin to the side of the road till you hear from others about their experiences with Simrad, Lowrance, Furuno. They all seem to have their problems, some more than others. I have had reasonably good luck with Simrad telephone support but others report otherwise. Part of the reaso...
- Wed Apr 10, 2019 9:24 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 210 OUTRAGE Electronic Boxes and Outrigger Bases
- Replies: 1
- Views: 3340
210 OUTRAGE Electronic Boxes and Outrigger Bases
I saw forum user ZIGZAB was looking for an electronics box and outrigger bases. I have both and am very pleased with them. The box is from C.E. Smith and made of fiberglasss with a lockable black tint plexiglass door. The size is perfect for the Outrage 210 T-top and the shape is superior to other m...
- Wed Apr 10, 2019 9:19 pm
- Forum: PERFORMANCE
- Topic: 210 Outrage Trim Tab: Recommendation; Installation
- Replies: 21
- Views: 20017
Re: 210 Outrage Trim Tab: Recommendation; Installation
In the spirit of keeping this topic alive, I just ordered Bennett 12" x 12" edge-mount electric tabs with the indication controls. For a short while I considered the 9' x 12" tabs but [many] boaters have indicated to me that bigger is better. I determined that the larger tabs will fit...
- Wed Feb 27, 2019 3:52 pm
- Forum: PERFORMANCE
- Topic: 210 Outrage Trim Tab: Recommendation; Installation
- Replies: 21
- Views: 20017
Re: 210 Outrage Trim Tab: Recommendation; Installation
Steve, in your photos I cannot tell if you used edge mount tabs versus conventional tabs. Can you enlighten us before I proceed further?
- Sun Jan 13, 2019 7:55 pm
- Forum: TRIPS and RENDEZVOUS
- Topic: Recommendations from Floridian Whaler Owners
- Replies: 13
- Views: 23358
Re: Recommendations from Floridian Whaler Owners
Pines and Palms in Islamorada is a very quaint old Florida hotel/motel with a dock and slips. Not too deep but doable in a smaller craft. Don't forget a stop at the World Wide Sportsman for lunch and try to go by boat. Dockage is free, lunch menu is great and the shopping will make your boat look ch...
- Mon Jan 07, 2019 10:03 pm
- Forum: The GAM
- Topic: Outboard Mix between Melbourne and Sydney
- Replies: 16
- Views: 8677
Re: Outboard Mix between Melbourne and Sydney
Peter, thanks for the clarification. I have made three trips to Australia in my life for mainly work and some diving as well. Wonderful country, wonderful people and a fun time. Adelaide, Sydney, Cairns, and Melbourne were my points of interest at the time.
- Mon Jan 07, 2019 9:26 am
- Forum: The GAM
- Topic: Outboard Mix between Melbourne and Sydney
- Replies: 16
- Views: 8677
Re: Outboard Mix between Melbourne and Sydney
Not to mention an 8 hour drive in Australia does not make for a broad cross section survey except for the part of Australia btween Melbourne and Sydney since there is an additional 148 hours of driving to see the complete coastline of Australia. But I do get the point and appreciate others observati...
- Wed Dec 26, 2018 12:41 pm
- Forum: TRIPS and RENDEZVOUS
- Topic: The Great Carrier Reef
- Replies: 8
- Views: 19163
Re: The Great Carrier Reef
Watch the weather closely and expect that seas of 1-2 feet will really be 2-4 feet and so on.
- Thu Dec 20, 2018 9:18 am
- Forum: The GAM
- Topic: Sue at Twin Cities
- Replies: 3
- Views: 3507
Re: Sue at Twin Cities
Quick update. All of my drain tubes arrived yesterday from the Edgewater, FL plant. One day after I ordered them from Sue.
- Tue Dec 18, 2018 2:07 pm
- Forum: The GAM
- Topic: Sue at Twin Cities
- Replies: 3
- Views: 3507
Sue at Twin Cities
Sorry to repeat what many have said before me but I have to give a shout out about Sue at Twin Cities Marine. I called her today to locate the motor well and transom drain tubes for my 210 Outrage. I had been banging my head against the wall trying to find these as aftermarket parts for quite some t...
- Wed Nov 14, 2018 10:58 pm
- Forum: PERFORMANCE
- Topic: 210 Outrage Trim Tab: Recommendation; Installation
- Replies: 21
- Views: 20017
Re: 210 Outrage Trim Tab: Recommendation; Installation
ZIGzag, I think you should pay attention to the details of Stevehof's description of his install of the Bennet electric actuators. It's a been there done that scenario. I am considering the same modification and if what he has done before works that works for me. Lenco's are also nice hardware but w...
- Thu Nov 01, 2018 10:05 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: After Impeller Change, Gear Case Always in Forward
- Replies: 10
- Views: 6464
Re: After Impeller Change, Gear Case Always in Forward
Somehow the small 3/4" splined gear shift rod got moved while the gearcase was off the motor or while putting it back on. This happens a lot until you figure out how to defeat that. Get a small pair of "needle nose" type vise grip pliers. Put the splined shaft in the "neutral&quo...
- Fri Oct 26, 2018 2:30 am
- Forum: The GAM
- Topic: Tucked the Whaler in for winter season
- Replies: 6
- Views: 3912
Re: Tucked the Whaler in for winter season
I'd leave the cars outside. They have way less "fun" value. But I do understand your dilemma.
- Fri Oct 26, 2018 2:24 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Water pump impeller price and quality
- Replies: 16
- Views: 10267
Re: Water pump impeller price and quality
Anecdotal comments both here and other sources indicate that smaller horsepower(20-75hp) engine impellers can last a lot longer than those on higher horsepower engines (90-300 hp). I think that's Bull$#!+ The thing to consider is the cost to benefit ratio of replacing the impeller say every 2-3 year...
- Thu Oct 18, 2018 11:29 pm
- Forum: The GAM
- Topic: Anderson Manufacturing and Upholstery
- Replies: 5
- Views: 4905
Re: Anderson Manufacturing and Upholstery
I think that is a reasonable response from Anderson. Tena is not obligated to give you the same advantage as an individual seeking to not use their resources and pricing from their suppliers. Having the ability to sew various materials I am still reluctant to DIY my own vinyl work and rely on reason...
- Thu Sep 20, 2018 10:01 am
- Forum: MARKETPLACE
- Topic: FS: Mercury Vengeance Propeller
- Replies: 1
- Views: 2300
Re: FS: Mercury Vengeance Propeller
Can't even get rock bottom for stuff here. OK, I'll follow Jimh's lead. Free to a good home of a CW member. For anyone else, it's $300.00 plus shipping.
- Fri Sep 14, 2018 10:30 am
- Forum: MARKETPLACE
- Topic: FS: Mercury Vengeance Propeller
- Replies: 1
- Views: 2300
FS: Mercury Vengeance Propeller
For sale is one used Mercury VENGEANCE three-blade propeller with Mercury hub for $75 plus actual shipping costs. Part # 48-16986 original pitch was 16, later reworked to 15 pitch. Was used on a Dauntless 160 with 90-HP four-stroke engine for skiing and other water sports. Will ship UPS. Please cont...
- Thu Sep 13, 2018 9:04 am
- Forum: PERFORMANCE
- Topic: Re-power SUPER SPORT 15 with 115-HP
- Replies: 14
- Views: 17970
Re: The need for speed
You should search the archives on this site. A while back there was a member that went through the same process--successfully I might add. The additional horsepower resulted in much higher top speeds and necessitated the addition of some sort of skeg or fin on the bottom of the boat.
- Wed Aug 29, 2018 7:40 pm
- Forum: PERFORMANCE
- Topic: c.2004 190 NANTUCKET: Jackplate to Correct Bow Riding Too High
- Replies: 33
- Views: 25622
Re: c.2004 190 NANTUCKET: Jackplate to Correct Bow Riding Too High
M--as I said or implied previously, you are now in a world of compromise. Pitch of the propeller, propeller height, jackplate, and--last but not least--a wing on the anti-ventilation plate are all band aids to your ultimate wants and needs. The fact that the boat in 2004 was rated for 150-HP and lat...
- Tue Aug 28, 2018 10:21 am
- Forum: PERFORMANCE
- Topic: c.2004 190 NANTUCKET: Jackplate to Correct Bow Riding Too High
- Replies: 33
- Views: 25622
Re: c.2004 190 NANTUCKET: Jackplate to Correct Bow Riding Too High
I can't help to wonder why you [i.e., InVision] did not choose more horsepower when you had the chance. Taking your expectations into account and knowing that maximum speed and faster acceleration is an "either-or" situation at this stage of the game, you may have to settle for two differe...
- Mon Aug 13, 2018 9:52 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 250 OUTRAGE: Remove Clamshells and Plug Through-hull Drains in Fish Boxes
- Replies: 9
- Views: 6524
Re: 250 OUTRAGE: Remove Clamshells and Plug Through-hull Drains in Fish Boxes
Matt, my 210 Outrage also has fishwell drains with clamshells on the outside. 18 years now and the clamshells have been flattened numerous times from hitting the bunks while loading on the trailer. They still function as on day one. They are needed for proper drainage mostly if you do not have macer...
- Mon Jul 16, 2018 5:25 pm
- Forum: The GAM
- Topic: Karavan trailer bearing grease procedure
- Replies: 16
- Views: 9010
Re: Karavan trailer bearing grease procedure
Try a $0.25 cotter pin if that isn't already what you mashed up. They are available at most if not all auto parts stores.
- Wed Jun 20, 2018 9:38 am
- Forum: The GAM
- Topic: WhalerParts.com
- Replies: 3
- Views: 3473
Re: WhalerParts.com
Thanks for the information, Phil. The good news is I did find paper copies of all of the drawings and parts lists for the 2005 model year 210 Outrage. I am going to scan them and PDF them for longevity though.
- Tue Jun 19, 2018 6:06 pm
- Forum: The GAM
- Topic: WhalerParts.com
- Replies: 3
- Views: 3473
WhalerParts.com
I tried to access whalerparts.com website today and found that my link is bad or the site was taken down. Haven't used it in a few years.
Let me know if it's gone or in a different place.
Let me know if it's gone or in a different place.
- Tue May 29, 2018 11:15 am
- Forum: VHF MARINE RADIO
- Topic: Standard-Horizon GX6000, GX6500
- Replies: 55
- Views: 118288
Re: Standard-Horizon GX6000, GX6500
Jim, you indicated in an early post (9 or 10) that separation would be necessary but did not elaborate on how much separation. Currently is it your opinion that the necessary separation makes the AIS features of this radio unsuitable for most Boston Whaler boats or just some?
- Fri Apr 13, 2018 11:13 am
- Forum: The GAM
- Topic: Accuracy of local television station weather forecasts for boating
- Replies: 14
- Views: 8062
Re: Accuracy of local television station weather forecasts for boating
In and around North Central Florida and the Big Bend area, we use a number of sources for determining suitable boating weather. A lot depends on the activity and duration. An overnighter 100 miles out on the Gulf of Mexico requires a different set of information than a day in the shallows hunting sc...
- Wed Mar 14, 2018 11:19 pm
- Forum: The GAM
- Topic: New, for me, 1986 18' Outrage
- Replies: 13
- Views: 9711
Re: New, for me, 1986 18' Outrage
Don't worry, the wind will die down in April for the most part. The best weather is when the foreigners leave and the sun gets hot.
- Wed Feb 28, 2018 4:22 pm
- Forum: VHF MARINE RADIO
- Topic: Standard-Horizon GX6000, GX6500
- Replies: 55
- Views: 118288
Re: ICOM M-506 v. Standard-Horizon GX6000
BOE Marine has the GX6000 for sale now at [$500-MAP discounted to] $427. The radio is on backorder.
[See: https://www.boemarine.com/collections/all/products/standard-horizon-25w-commercial-grade-fixed-mount-vhf-w-nmea-2000-integrated-ais-receiver ]
[See: https://www.boemarine.com/collections/all/products/standard-horizon-25w-commercial-grade-fixed-mount-vhf-w-nmea-2000-integrated-ais-receiver ]
- Fri Feb 02, 2018 12:05 pm
- Forum: VHF MARINE RADIO
- Topic: Si-Tex VHF Marine Band DSC Radio with AIS Receiver
- Replies: 1
- Views: 10451
Re: Si-Tex VHF Marine Band DSC Radio with AIS Receiver
I have yet to be able to operate any product from Si-Tex without a thorough reading of the manual and much trial and error. The phrase "user friendly" is not in that company's vocabulary.
- Mon Jan 22, 2018 6:43 pm
- Forum: The GAM
- Topic: St. Lawrence Seaway Delays--Or How I Spent My Christmas Vacation
- Replies: 49
- Views: 26092
Re: St. Lawrence Seaway Delays--Or How I Spent My Christmas Vacation
There is an informative video of the Little Rock being stranded in Montreal for the winter on MSN today.
- Mon Jul 10, 2017 8:10 pm
- Forum: VHF MARINE RADIO
- Topic: Standard-Horizon GX6000, GX6500
- Replies: 55
- Views: 118288
Re: Standard-Horizon GX6000, GX6500
Thanks for the update, JimH. I have been peeking around the net lately for one of the two models to be offered for sale. So far no luck. I could go the easy route and integrate my already Simrad suite with a RS-30 (not sure if that's the correct name) with NEMA-2000 and AIS receiver built in. But I ...
- Mon Jul 10, 2017 7:59 pm
- Forum: The GAM
- Topic: Can an Outrage 190 handle Raritan and Sandy hook
- Replies: 2
- Views: 2882
Re: Can an Outrage 190 handle Raritan and Sandy hook
The simple anser is YES. I have had my 16' Dauntless in the bay numerous times and it worked quite well. A 19' is ideal for those beautiful summer days. When the winds kick up in the afternoon and lightening gets close, pull the plug and head for the marina. Did that many times on my Uncle's Nauset ...
- Mon May 22, 2017 6:15 pm
- Forum: VHF MARINE RADIO
- Topic: Standard-Horizon GX6000, GX6500
- Replies: 55
- Views: 118288
Re: Standard-Horizon GX6000, GX6500
Any further news on the release of these two radios? I can't find one anywhere.
- Sat Apr 22, 2017 10:50 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2002 DAUNTLESS 180 Bow Rail Replacement
- Replies: 2
- Views: 2607
Re: Bow rail replacement
I would try a local marine fabricator if they are available in your area to fix the bent rail. That's if [the damage is confined to] one part of the rail. If the whole [railing] is bent up, then [buy] through Sue at Twin Cities Marine a replacement bow rail. Sorry to hear about this misfortune. It s...
- Wed Apr 19, 2017 12:36 pm
- Forum: SMALL BOAT ELECTRICAL
- Topic: Simrad GO5 XSE
- Replies: 8
- Views: 7689
Re: Simrad GO5 XSE
Not to change the subject,Duane. Why did you move away from Lowrance to Simrad? I know they are cousins within the Navico empire so I'm curious if there were technical reasons.
Re: Dock Side
I agree with the comments as well. We are discussing a land based structure and when doing, the points of a compass are the correct way to determine orientation. The fact that the ferry has priority is probably related to the fact the ferry unlike the average boater wants to be up against that dock ...
- Mon Jan 09, 2017 2:45 pm
- Forum: The GAM
- Topic: Marine Sanitation
- Replies: 18
- Views: 13215
Re: Marine Sanitation
Waste plate might be a reference to the legend plate that is installed when there are "facilities" aboard. The plate generally describes the rules and procedures for use of said device in various waters.
- Mon Jan 02, 2017 4:55 pm
- Forum: SMALL BOAT ELECTRICAL
- Topic: Returning to a SONAR Target
- Replies: 18
- Views: 11267
Re: Returning to a SONAR Target
More than one waypoint will get you on the wreck faster. As divers and bottom fishers, finding a wreck with two or three waypoints increases the reliability and timeliness of finding a wreck or reef. For the larger ones, usually the bow and stern are saved as waypoints and any path in between those ...
- Mon Oct 31, 2016 8:44 am
- Forum: The GAM
- Topic: Inflatable PFD Recomendations
- Replies: 19
- Views: 12706
Re: Inflatable PFD Recomendations
Can't go wrong with the Mustang brand. For what it's worth get the hydrostatic release type. It's a few more bucks but you never have to worry about humidity and moisture setting one off. Not that there is much humidity and moisture in New Jersey ;-)
- Fri Oct 21, 2016 6:36 pm
- Forum: SMALL BOAT ELECTRICAL
- Topic: Euro-style Terminal Strip
- Replies: 8
- Views: 7533
Re: Euro-style Terminal Strip
Jim's advice is pretty spot-on. The Euro-style strips are awfully convenient and will last a long time if used properly. As Jim states, if there is a compression plate, then go ahead and use normal wires at the end. If there is no plate, either solder the wire ends so they are solid or crimp a ferru...
- Thu Sep 29, 2016 12:00 pm
- Forum: The GAM
- Topic: Highway Speed When Towing
- Replies: 12
- Views: 9338
Re: Highway Speed When Towing
Butch put it much more eloquently than I would. I drive the speed limit (70 mph) and up to 75 mph. Having had several tire, brake, suspension problems while travelling at these speeds I am comfortable dealing with the problem. In fact, most of the tire failures have been at 45-60 mph and within 10 m...
- Sun Jun 12, 2016 10:53 am
- Forum: The GAM
- Topic: New to boating; interested in used Whaler
- Replies: 12
- Views: 7974
Re: New to boating; interested in used Whaler
There is a huge gap in both price, quality, and sea worthiness between a 17' Boston Whaler and a 17' Key West. Not that a Key West boat can't fish but I'd rather be in a Boston Whaler when the weather turns on you 10 miles away from shore. If your budget is restricted then get the Key West, find out...
- Sun Apr 03, 2016 11:58 am
- Forum: The GAM
- Topic: Life Jackets Attachments
- Replies: 34
- Views: 21726
Re: Life Jackets Attachments
Sadly, I do not have a handheld VHF radio presently. The cell phone was handy but I ran out of room even with two life preservers. All joking aside, everyone should watch the Cold Water Boot Camp video posted by Duane on March 23 in this topic. Most of that stuff I had would be of little use after t...
- Sat Apr 02, 2016 1:00 pm
- Forum: The GAM
- Topic: Life Jackets Attachments
- Replies: 34
- Views: 21726
Re: Life Jackets Attachments
Having been impressed with the comments made about life jackets and overboard gear, I decided to assemble a rig worthy of many of the comments and choices recommended by others in this thread. Keep in mind that my plans changed drastically when Jimh brought up the possibility of not having enough fl...
- Mon Mar 28, 2016 10:20 pm
- Forum: SMALL BOAT ELECTRICAL
- Topic: LiFePO Batteries for Marine Use
- Replies: 39
- Views: 58262
Re: LiFePO Batteries for Marine Use
Lithium based batteries catch fire all the time and some burn with the intensity of magnesium. Not on my boat.
- Fri Mar 18, 2016 6:52 pm
- Forum: The GAM
- Topic: Life Jackets Attachments
- Replies: 34
- Views: 21726
Re: Life Jackets Attachments
I understand the need for a knife for both diving and as a safety component on a life jacket. There are many good solutions for both. My interest was with the selection of a traditional 10"-12" sharp pointed knife strapped to your calf vis a vis Mike Nelson in the TV show "Seahunt&quo...
- Thu Mar 17, 2016 10:11 am
- Forum: The GAM
- Topic: Life Jackets Attachments
- Replies: 34
- Views: 21726
Re: Life Jackets Attachments
Dave, you seriously strap a divers knife to your leg??? Divers don't even use them anymore, unless they got certified last week. At least the ones that actually go in the water vs. watching old Seahunt reruns. A sharp knife is understandable and makes some sense for some situations but a divers knif...
- Sat Mar 12, 2016 10:00 am
- Forum: SMALL BOAT ELECTRICAL
- Topic: T-N-T Motor Diagnosis
- Replies: 3
- Views: 3143
Re: T-N-T Motor Diagnosis
Did you get the motor to turn?
- Sat Mar 12, 2016 9:56 am
- Forum: The GAM
- Topic: Navigation Rules: Right of way
- Replies: 43
- Views: 23890
Re: Navigation Rules: Right of way
Jimh, you bring up a good point. In this case, the dive boat would certainly be encouraged to give way and get the divers out of the water. Just like many other states that have robust multilayered law enforcement, Florida's finest would find some citation or "safe boating award" for the o...