Search found 16 matches

by Blackduck
Wed Apr 17, 2019 11:46 am
Forum: REPAIRS and MODIFICATIONS
Topic: Barrier Coat and Anti-Fouling Paint for Splash Well: Outrage 22 WD
Replies: 8
Views: 2049

Re: Raising Static Trim in Stern

If the batteries [in the OUTRAGE 22 Whaler Drive boat under discussion] are in the stern, moving them to the console will [increase freeboard in the stern]. Adding ballast to the bow will to the same. [Some unidentified described on as] boat has always been low in the stern. ASIDE ON A NEW AND UNREL...
by Blackduck
Thu Mar 28, 2019 3:09 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Gel Coat Repair
Replies: 8
Views: 1461

Re: Gel Coat Repair

[Spectrum] will not match your hull color, straight out of the jar. [Spectrum] will have to be adjusted by tinting. {The original article used the undefined pronoun "it", which I assume referred to "Spectrum." If "it" referred to something else, the author should edit h...
by Blackduck
Tue Mar 05, 2019 1:45 pm
Forum: MARKETPLACE
Topic: FS: 1966 Nauset in Rhode Island
Replies: 5
Views: 1154

Re: FS: 1966 Nauset in Rhode Island

I would be interested in pictures, I'm in RI, so it could be easy-cedrictheclam@gmail.com
by Blackduck
Mon Sep 24, 2018 4:11 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Fuel Tank Installation without Foam
Replies: 12
Views: 1584

Re: Fuel Tank Installation without Foam

I installed an aluminum 40 gallon tank without foam into a 1973 19'. This works well in this boat as water does not pass over the top of the tank like it does on newer Outages. I left a 1" plugged, access hole in the cover for checking and water removal by pump. Tank was just block shimmed in a...
by Blackduck
Wed Sep 19, 2018 12:10 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Re-core rotten deck cover
Replies: 8
Views: 1505

Re: Re-core rotten deck cover

I have done the job. I think $4500 is a fair price to do it right. If someone offered me that money to do the job, I would turn them away-
by Blackduck
Mon Jun 04, 2018 5:08 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Replacement fuel tank: 1976 Outrage 19
Replies: 7
Views: 1246

Re: Replacement fuel tank: 1976 Outrage 19

There are no plastic tanks that will fit into your tank cavity available. You will have to have a new aluminum one made, either Florida Marine or a maker in NJ, can't remember their name-
by Blackduck
Fri May 18, 2018 4:09 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Montauk Console Mounting
Replies: 1
Views: 624

Re: Montauk Console Mounting

Screws should be #14, 1/4". 1" should be fine, but you can go up to 1 1/4".
by Blackduck
Fri Sep 29, 2017 11:20 am
Forum: REPAIRS and MODIFICATIONS
Topic: Repair OUTRAGE 18 Hull Damage; a Casualty of Hurricane Harvey
Replies: 4
Views: 1663

Re: Repair OUTRAGE 18 Hull Damage; a Casualty of Hurricane Harvey

The only hard part of this repair is the color matching. It takes knowing color theory. You might be better to pay someone with these skills to do the gel coat. If you try it yourself, make sure you are happy with the color match before you proceed.
by Blackduck
Tue Sep 19, 2017 12:57 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Sapele and Mahogany Lumber Source, Uses
Replies: 9
Views: 3296

Re: Sapele and Mahogany Lumber Source, Uses

Seats 1-inch and less for the rest; some might be 7/8-inch.
by Blackduck
Tue Sep 19, 2017 11:30 am
Forum: REPAIRS and MODIFICATIONS
Topic: Sapele and Mahogany Lumber Source, Uses
Replies: 9
Views: 3296

Re: Sapele and Mahogany Lumber Source, Uses

Sapele is heavier
by Blackduck
Mon Jun 19, 2017 5:28 pm
Forum: REPAIRS and MODIFICATIONS
Topic: More Than Bottom Paint Needed
Replies: 10
Views: 2444

Re: More Than Bottom Paint Needed

Your boat suffers from severe blistering. The blisters have opened, and much of the original gelcoat is damaged, or just plain gone. The best approach would be to soda blast the bottom, fill all the holes, etc. with thickened epoxy, and then apply a 5 or six coats of epoxy. You are going to need man...
by Blackduck
Sun May 28, 2017 10:59 am
Forum: MARKETPLACE
Topic: 1974 Outrage 19 likely for sale
Replies: 11
Views: 4013

Re: 1974 Outrage 19 likely for sale

Your boat has great potential. I am trying to complete the same boat, in about the same condition. I bought mine for $6500, with a Suzuki DF140 with 40 hours, and a new fuel tank. So, these boats just don't bring much money, and to restore them takes a ton of time and money. I think $4000 is a good ...
by Blackduck
Wed Apr 26, 2017 4:01 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Recommend Fuel Tank Tester; Finding Source of Water in Fuel
Replies: 41
Views: 7559

Re: Recommend Fuel Tank Tester; Finding Source of Water in Fuel

The tank in your boat is almost thirty years old. ALL of the Outrage tank cavities of the 70's and 80's leak to some degree, due to poor design, and even with the best of care, leak rain water. Getting the tank pressure tested will most likely confirm that it is leaking. You can do it yourself, just...
by Blackduck
Thu Jul 21, 2016 12:50 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Desert Sand Match in AWLGRIP
Replies: 8
Views: 2704

Re: Desert Sand Match in AWLGRIP

Moon Dust is very close, a bit on the light side. You can add a little brown and a little blue tint to come as close as you are ever going to get-
by Blackduck
Mon Jun 13, 2016 11:38 am
Forum: MARKETPLACE
Topic: 1967 Nauset - For Sale
Replies: 1
Views: 1106

Re: 1967 Nauset - For Sale

Any interest in selling the boat and trailer, without the engine?
by Blackduck
Mon Apr 25, 2016 12:44 pm
Forum: The GAM
Topic: 1983 Outrage 18
Replies: 6
Views: 2134

Re: 1983 Outrage 18' New member looking for advice

There is no way to remove the water from a Boston Whaler boat once it is absorbed by its foam. I would move on to another boat, as this is a major problem for this boat.