Search found 191 matches

by Ridge Runner
Mon Apr 10, 2017 12:32 pm
Forum: SMALL BOAT ELECTRICAL
Topic: 210 Montauk: Installation of Electronics on Helm Dashboard
Replies: 18
Views: 6742

Re: 210 Montauk: Installation of Electronics on Helm Dashboard

Thank you - Jim, my mistake there are only six gauges. A tachometer, water pressure, water temperature, voltage, oil level and fuel level gauge. The escutcheon plate under the Evinrude EST controls was only available white at the time of rigging. At some point in the future I will probably manufactu...
by Ridge Runner
Sun Apr 09, 2017 6:28 pm
Forum: PERFORMANCE
Topic: 210 Montauk Evinrude 200 H.O. G2
Replies: 16
Views: 6932

Re: 210 Montauk Evinrude 200 H.O. G2

Here is the first picture of the Evinrude 200HO G2 mounted on the 210 Montauk: IMG_2748c.jpg It's hard to tell if the lower unit will be clear of the water, as the tow arch is blocking full tilt of the outboard. A factory rigged 210 Montauk with a Mercury Verado 200 XL L6 also has the same concern: ...
by Ridge Runner
Sun Apr 09, 2017 6:15 pm
Forum: SMALL BOAT ELECTRICAL
Topic: 210 Montauk: Installation of Electronics on Helm Dashboard
Replies: 18
Views: 6742

Re: 210 Montauk: Installation of Electronics on Helm Dashboard

I would have preferred the dealer use black starboard under the new Evinrude controls, so I might change that out at a later date. Notice the six Evinrude gauges compared the original Mercury gauge lay-out in the picture I posted above.

Here is the finished console:

IMG_2746c.jpg
IMG_2746c.jpg (158.71 KiB) Viewed 6113 times
by Ridge Runner
Thu Apr 06, 2017 9:54 pm
Forum: PERFORMANCE
Topic: Prop Perplexed
Replies: 5
Views: 2473

Re: Prop Perplexed

by Ridge Runner
Sun Mar 26, 2017 4:06 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Tank Level Gauge for 22-Gallon On-deck Moeller Tank
Replies: 2
Views: 1188

Re: Tank Level Gauge for 22-Gallon On-deck Moeller Tank

I also have the white 22-gallon Moeller fuel tank. When this tank first came out they had problems with the fuel gauge cap. Moeller was not much help, but a replacement gauge cap is manufactured by Kelch. The replacement gauge is a vented 2-1/4-inch threaded cap with a 12-1/4-inch float depth Kelch ...
by Ridge Runner
Wed Mar 22, 2017 8:14 am
Forum: REPAIRS and MODIFICATIONS
Topic: Alternate location of fuel tank vent
Replies: 9
Views: 2634

Re: Alternate location of fuel tank vent

Jefecinco's comment on the 190 Montauk's fuel venting system made me wonder about my new 210 Montauk. It seems the 210 Montauk is venting through the fill cap:
fuel.jpg
fuel.jpg (16.3 KiB) Viewed 2539 times
by Ridge Runner
Tue Mar 21, 2017 8:13 am
Forum: REPAIRS and MODIFICATIONS
Topic: 2012 170 Montauk Brown Fluid Coming From Console
Replies: 7
Views: 2835

Re: 2012 170 Montauk Brown Fluid Coming From Console

Do you keep your 170 Montauk in the water with the drain plug out often? If so the rigging tunnel on the 170 Montauk will fill with water and it's not easy to get all the water out. You can see in the picture below the rigging tunnel can easily fill up with sea or lake water if the boat is kept in t...
by Ridge Runner
Tue Mar 21, 2017 7:56 am
Forum: The GAM
Topic: Boat Cover When On Highway; Engine Supports
Replies: 22
Views: 6931

Re: Trailering

I prefer to trailer without a cover on. Wind buffering on the cover and the cover wearing away some gel coat is always a concern. I find peace of mind trailering without the cover. I have always used the universal version of the rubber M-Y wedge to support the outboard:

http://www.m-ywedge.com/
by Ridge Runner
Mon Mar 06, 2017 8:02 pm
Forum: The GAM
Topic: South Jersey Boaters: Little Egg Inlet
Replies: 13
Views: 4231

Re: For all the South Jersey boaters "Little Egg Inlet"

Thanks Duane - This sure makes it tough for folks in the area.
I used to keep a boat at Total Marine in Little Egg Harbor on Tuckerton Creek, that's a long run up to the Barnegat Inlet.
by Ridge Runner
Mon Jan 30, 2017 10:03 pm
Forum: VHF MARINE RADIO
Topic: Standard-Horizon GX6000, GX6500
Replies: 54
Views: 32528

Re: Standard-Horizon GX6000, GX6500

You can order the radios from AMAZON.COM, but there is lead time of two to four weeks for the GX6000 and one to two months for the GX6500. I am not sure if the lead times are accurate, but you can place an order : GX6000 for $522: https://www.amazon.com/Standard-Horizon-GX6000-Commercial-Grade/dp/B0...
by Ridge Runner
Mon Jan 30, 2017 9:52 pm
Forum: REPAIRS and MODIFICATIONS
Topic: E-TEC Top-mount Remote Control Too Large
Replies: 9
Views: 3737

Re: E-TEC Top-mount Remote Control Too Large

The E-Tec remote control on my 170 Montauk has a very slight overhang on the rear of console, my dealer just filled the space with white silicon caulk.

DSC_0432.jpg
DSC_0432.jpg (98.43 KiB) Viewed 3626 times
by Ridge Runner
Sat Jan 21, 2017 9:51 am
Forum: REPAIRS and MODIFICATIONS
Topic: 2003 Outrage 240 Ski Pylon
Replies: 3
Views: 1708

Re: 2003 Outrage 240 Ski Pylon

A few of us CW members have installed the Turboswing. I installed one on my 170 Montauk and it has worked out very well. I can easily tow large tubes, multiple tubes--plus I tow two skiers very often.

tow.jpg
tow.jpg (12.83 KiB) Viewed 1696 times
P1010566.jpg
P1010566.jpg (85.92 KiB) Viewed 1696 times
by Ridge Runner
Mon Jan 09, 2017 6:30 pm
Forum: PERFORMANCE
Topic: FreeValve Engine
Replies: 3
Views: 1981

Re: FreeValve Engine

I believe Renault has a patent on an electro-hydraulic valve actuation system. Renault Racing was developing an electro-hydraulic system, where pressurized circuits operate the valves. The design eliminates cams in favor of a hydraulic circuit controlled by an electronic valve. The system was engine...
by Ridge Runner
Wed Jan 04, 2017 10:50 pm
Forum: PERFORMANCE
Topic: c.1960 16-footer Re-power
Replies: 12
Views: 4707

Re: c.1960 16-footer Re-power

The price you were quoted for a regular 90 E-TEC seems very high. A friend on mine in New Jersey just purchased a new 90 E-TEC for a little over $10,000, (plus NJ tax 7%) with controls and rigging, three analog gauges, new control box, propeller, and so on. Plus, he received the current 10-year cove...
by Ridge Runner
Fri Dec 30, 2016 9:05 am
Forum: SMALL BOAT ELECTRICAL
Topic: Lowrance Announces New HDS CARBON Line
Replies: 9
Views: 4293

Re: Lowrance Announces New HDS CARBON Line

Lowrance's new promotional video for the CARBON HDS: https://www.youtube.com/watch?v=B3Dsa1uj7hI
by Ridge Runner
Tue Dec 20, 2016 12:04 pm
Forum: The GAM
Topic: Keep the Classic, sell the 170 or keep 170, sell Classic
Replies: 5
Views: 2505

Re: Keep the Classic, sell the 170 or keep 170, sell Classic

I agree with the other comments. I have owned both - the 170 Montauk is a much larger boat. The 115 Yamaha is a good match for the hull, you will not be disappointed.
by Ridge Runner
Sat Dec 17, 2016 8:50 am
Forum: The GAM
Topic: DAUNTLESS v. OUTRAGE Deadrise Angle
Replies: 6
Views: 3561

Re: DAUNTLESS v. OUTRAGE Deadrise Angle

As you can see in these pictures the 2006 190 Outrage has a deeper and sharper bow entry (Deeper V) that is carried farther aft than the 2002 180 Dauntless. The Outrage will have better sea keeping abilities than the Dauntless. While the Dauntless will have better stability than the Outrage at rest....
by Ridge Runner
Sat Dec 10, 2016 4:04 pm
Forum: The GAM
Topic: Towing 170 Montauk with Ford Escape
Replies: 9
Views: 3406

Re: Towing 170 Montauk with Ford Escape

This will be a fly and drive out trip. A one way ticket to FL on Dec 27th and then I need to start to directly driving to NJ early the next morning. Unfortunately getting the rig weighed before leaving will not be possible. Wheel bearings are in good shape and the radial tires are pretty new - the b...
by Ridge Runner
Sat Dec 10, 2016 10:50 am
Forum: The GAM
Topic: Towing 170 Montauk with Ford Escape
Replies: 9
Views: 3406

Towing 170 Montauk with Ford Escape

I want to solicit comments and thoughts about towing a 170 Montauk to New Jersey from Florida with a 2015 Ford AWD Escape. The Escape is properly equipped to tow 3,500-lbs. Normally I would use my Ford Expedition but I need to move both the boat and car to New Jersey. I have used the Ford Escape to ...
by Ridge Runner
Thu Dec 08, 2016 6:48 am
Forum: REPAIRS and MODIFICATIONS
Topic: Float Switch Choice by State of Manufacturing Plant
Replies: 8
Views: 3230

Re: Float Switch Choice by State of Manufacturing Plant

Jim - all very interesting points. I do think this is a very proven design and a mechanical float is very reliable. I also find the price to be expensive for a recreational boater. The attachment system seems to be solely designed for round pumps if your were to have a different pump design I am not...
by Ridge Runner
Tue Dec 06, 2016 12:47 am
Forum: REPAIRS and MODIFICATIONS
Topic: Float Switch Choice by State of Manufacturing Plant
Replies: 8
Views: 3230

Re: Float Switch Choice by State of Manufacturing Plant

Tef-Gel is the manufacture: http://www.tefgel.com/contain.php?param=pumpswitch_price Also available on amazon: https://www.amazon.com/Ultra-Safety-Systems-Pump-Switch/dp/B00CG8G8QY Seems to be a similar design to the Aqualarm switch I noted above. It looks like a smaller design of a float that you m...
by Ridge Runner
Mon Dec 05, 2016 11:56 pm
Forum: The GAM
Topic: Outboard Engine Leasing
Replies: 12
Views: 3945

Re: Outboard Engine Leasing

Leasing of outboards is currently done on a commercial basis and "off" lease motors are available in the market: http://bridgeviewmarine.com/product-category/boat-engines-outboards/lease-return-engines/ Will leasing of outboards ever become a consumer financing option? Probably not because...
by Ridge Runner
Tue Nov 29, 2016 3:38 am
Forum: PERFORMANCE
Topic: Outrage17 II and Honda BF115: Repeated Oscillation of the Bow Up and Down
Replies: 7
Views: 2917

Re: Outrage17 II and Honda BF115: Repeated Oscillation of the Bow Up and Down

Is your Honda 13.5 x 15 propeller a stainless steel prop? PN# 58133-ZY3-A15S a Solas Titan (Solas manufactures Honda propellers)? If so this is a high rake blade design that provides bow lift. If you want to stay with Honda (Solas) propellers I would look at trying their HR Titan 4 Propeller, this i...
by Ridge Runner
Mon Nov 28, 2016 3:35 pm
Forum: PERFORMANCE
Topic: Outrage17 II and Honda BF115: Repeated Oscillation of the Bow Up and Down
Replies: 7
Views: 2917

Re: Outrage17 II and Honda BF115: Repeated Oscillation of the Bow Up and Down

As Phil mentions the 17 foot Outrage II is prone to porpoising. Most [of these] boats were sold with either a Mercury 125-HP or Mercury 150-HP two-cycle outboard engines with a weight of 350 to 400-lbs. Your Honda BF115 has added about 100-lbs to the stern of the Outrage II. I owned an 17 foot Outra...
by Ridge Runner
Sat Nov 26, 2016 11:13 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Float Switch Choice by State of Manufacturing Plant
Replies: 8
Views: 3230

Re:Float Switch Choice by State of Manufacturing Plant

I am not sure about Maine but Aqualarm is manufactured in the US (California) and gets good reviews. http://aqualarm.net/bilge-alarms-switches-c-6/20090-heavy-duty-pump-switch-p-84.html A very good float switch I have used was manufactured by Material Sciences Corp and sold under the "SensaSwit...
by Ridge Runner
Wed Nov 23, 2016 6:42 am
Forum: MARKETPLACE
Topic: Value of 2005 150 Sport
Replies: 1
Views: 871

Re: Value of 2005 150 Sport

I would estimate in the $10,000 to $11,500 range. The value will depend on the geography of where the boat is listed for sale, the options it has, the condition of the hull, the condition of the trailer, the maintenance records and hours on the engine and other factors. Here are the current listing ...
by Ridge Runner
Fri Nov 18, 2016 8:14 pm
Forum: REPAIRS and MODIFICATIONS
Topic: KING StarBoard color "Seafoam"
Replies: 10
Views: 4143

Re: KING StarBoard color "Sea Foam"

The "Fish White" color is going to be a much better match for Desert Tan:
Kings SB.JPG
Kings SB.JPG (24.56 KiB) Viewed 4127 times


For $10 you can order all the colors to check the match:

http://www.boatoutfitters.com/store/p/276-King-Starboard-Sample-Chain.html
by Ridge Runner
Tue Nov 15, 2016 8:17 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Montauk 150 seat repair
Replies: 1
Views: 750

Re: Montauk 150 seat repair

Yes, it might be available. You can go to whalerparts.com and look at the part break-out for your year and model. The RPS (reversible pilot seat) has its own part break-out. The first page should be the schematic for your model and year RPS. Match the schematic part number 1,2,3, to the listing on p...
by Ridge Runner
Thu Nov 10, 2016 3:07 pm
Forum: REPAIRS and MODIFICATIONS
Topic: 1989 Newport 17 Adding T-top
Replies: 3
Views: 1427

Re: 1989 Newport 17 Adding T-top

You should contact the manufacturer and ask about installation on a 16/17 foot Boston Whaler. As noted by DaveS proper mounting locations will be hard to come by. I am not familiar with Dolphin Tops - but I do know Fish Master Tops have been installed on BW 17 footers. They have a document on mounti...
by Ridge Runner
Wed Nov 09, 2016 1:07 pm
Forum: The GAM
Topic: Boat Fuel Tank Ruptures During Testing at Boston Whaler plant in Edgewater
Replies: 5
Views: 2519

Boat Fuel Tank Ruptures During Testing at Boston Whaler plant in Edgewater

A compressed air tank exploded under the deck of a Boston Whaler boat yesterday. The news article explains that compressed air was being used to pressure test the fuel tank. I wonder at what air pressure does the factory normally test the fuel system at? https://goo.gl/zW8V4k The local NBC news affi...
by Ridge Runner
Fri Nov 04, 2016 10:01 pm
Forum: The GAM
Topic: "1-Foot-itis" Dauntless 15 v. Dauntless 16
Replies: 9
Views: 4187

Re: "1-Foot-itis" Dauntless 15 v. Dauntless 16

My 170 Montauk on it's factory trailer with swing tongue is 20' 4" - If you shorten the bow stop or have custom made bow stop and move the bunks forward - I think you might be able to get the length where you need it. You might need to move the axle forward also to get the correct tongue weight...
by Ridge Runner
Thu Nov 03, 2016 9:38 pm
Forum: The GAM
Topic: Whereabouts of Mike Myers--BW, Bertram
Replies: 2
Views: 1701

Re: Whereabouts of Mike Myers--BW, Bertram

LinkedIn profile: https://www.linkedin.com/in/michaelmyers7

You might be able to connect to him through LinkedIn email.
by Ridge Runner
Wed Nov 02, 2016 4:55 pm
Forum: The GAM
Topic: Brunswick Buys Aluminum Boatbuilder THUNDER JET
Replies: 11
Views: 5173

Re: Brunswick Buys Aluminum Boatbuilder THUNDER JET

THUNDER JET has started to make a strong name for itself in some commercial and government markets. This acquisition positions Brunswick's Commercial division with an experienced smaller sized plate aluminum boat builder already in the government markets. The USCG's boat are mostly Marine-grade, pla...
by Ridge Runner
Tue Nov 01, 2016 8:49 pm
Forum: The GAM
Topic: CONQUEST: Yamaha Two-cycle v. Honda Four-cycle
Replies: 14
Views: 4675

Re: CONQUEST: Yamaha Two-cycle v. Honda Four-cycle

Yes, which one?
by Ridge Runner
Sat Oct 29, 2016 9:57 am
Forum: SMALL BOAT ELECTRICAL
Topic: Fell Marine MOB Engine Shut-off
Replies: 18
Views: 7773

Re: Fell Marine MOB Engine Shut-off

Yes - BUT it could be a bit annoying - based on the FAQ sections - you can override the system in two ways. 1) The xHUB installed in the boat has a button. If you press & hold this button for 13 seconds it will enter Override Mode. In Override Mode you can drive the boat without the need to conn...
by Ridge Runner
Sat Oct 29, 2016 12:05 am
Forum: SMALL BOAT ELECTRICAL
Topic: Fell Marine MOB Engine Shut-off
Replies: 18
Views: 7773

Re: Fell Marine MOB Engine Shut-off

The circular gizmo is the xHUB and it gets wired directly to power - it actually can be used stand-alone or in parallel with your existing kill switch. Or it can be used as a MOB alarm only device. The battery symbol on the xHUB shows the battery strength on the wireless connected xFOB - the device ...
by Ridge Runner
Fri Oct 28, 2016 3:29 pm
Forum: SMALL BOAT ELECTRICAL
Topic: Fell Marine MOB Engine Shut-off
Replies: 18
Views: 7773

Re: Fell Marine MOB Engine Shut-off

Jim - I believe it is the company's logo. The icon over top the logo is the XHUB's battery indicator. It shows the battery status of the xFOB. The ring on the xHUB is the pairing indicator.
logo.JPG
logo.JPG (9.34 KiB) Viewed 7758 times
by Ridge Runner
Wed Oct 26, 2016 9:00 am
Forum: The GAM
Topic: CONQUEST: Yamaha Two-cycle v. Honda Four-cycle
Replies: 14
Views: 4675

Re: CONQUEST: Yamaha Two-cycle v. Honda Four-cycle

The Yamaha powered boat will definitely get on plane much easier. For $15,000 in price difference I would go with the Yamaha powered boat - run it for a few years and put the $15k in a re-power kitty. This hull is rated for 600HP and a prefect re-power would be twin Evinrude E-Tec 300 outboards ~500...
by Ridge Runner
Wed Oct 26, 2016 12:51 am
Forum: The GAM
Topic: CONQUEST: Yamaha Two-cycle v. Honda Four-cycle
Replies: 14
Views: 4675

Re: CONQUEST: Yamaha Two-cycle v. Honda Four-cycle

Make sure you sea-trail both boats. The older, pre 2004, Conquests 28's and 295 (the same boat - ~31' in length, 6,600LBS dry weight, 10'4" beam), have a notched hull. The hull is shorter than the boat. These earlier Conquests are designed for lighter two stroke engines and the original factory...
by Ridge Runner
Fri Oct 14, 2016 5:43 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Montauk 170 Custom Rear Seating
Replies: 3
Views: 1746

Re: Montauk 170 Custom Rear Seating

The livewell has plumbing and pump. The pick-up for the intake for the livewell is below the waterline. If you take out the livewell the below the waterline fitting and hole would have to be filled and repaired. I believe you can order and install the optional 170 Montauk's rear port and starboard s...
by Ridge Runner
Tue Oct 11, 2016 5:42 pm
Forum: VHF MARINE RADIO
Topic: Standard-Horizon GX6000, GX6500
Replies: 54
Views: 32528

Re: Standard-Horizon GX6000, GX6500

Jim - do you have any idea when this will be available in the market? I need to choose my new VHF very soon and I was going purchase an ICOM M506, with GPS, AIS and NEMA 2000. This seems to be an interesting alternative.
by Ridge Runner
Wed Oct 05, 2016 5:21 pm
Forum: SMALL BOAT ELECTRICAL
Topic: 210 Montauk: Installation of Electronics on Helm Dashboard
Replies: 18
Views: 6742

Re: 210 Montauk: Installation of Electronics on Helm Dashboard

Thank you for the valuably information. I looked up your Simrad NSS 9 - installed depth is 3.31" my HDS-9 is 2.13" so I shouldn't have to cut into the liner. I am going to take out the Fusion radio and install a VHF radio in that location the same as in the stock BW picture. I might also r...
by Ridge Runner
Wed Oct 05, 2016 2:19 pm
Forum: SMALL BOAT ELECTRICAL
Topic: 210 Montauk: Installation of Electronics on Helm Dashboard
Replies: 18
Views: 6742

Re: 210 Montauk: Installation of Electronics on Helm Dashboard

Rinoue - I am good with HDS-9 mounting in console. When you mounted your unit did you note the depth to the rear of the console. I think the concern will be mounting a VHF radio in the console next to the HDS-9 most VHF radios need about 6" of depth.
by Ridge Runner
Wed Oct 05, 2016 11:49 am
Forum: SMALL BOAT ELECTRICAL
Topic: 210 Montauk: Installation of Electronics on Helm Dashboard
Replies: 18
Views: 6742

Re: 210 Montauk: Installation of Electronics on Helm Dashboard

I have not had a chance to do a detailed look at the power distribution on this boat yet - just a quick look around (the dealer I purchased the boat from is about 90 minutes from my house). This boat is set-up with two batteries, one under each stern seat and on the port side is the battery selector...
by Ridge Runner
Tue Oct 04, 2016 11:25 pm
Forum: SMALL BOAT ELECTRICAL
Topic: 210 Montauk: Installation of Electronics on Helm Dashboard
Replies: 18
Views: 6742

Re: 210 Montauk: Installation of Electronics on Helm Dashboard

Great observations and recommendations. As you know, Evinrude is an all in one safety lanyard/ignition switch so that will go in the location of the current Mercury safety lanyard. On my console picture above you can see the second panel with the additional switches for the livewells, raw water pump...
by Ridge Runner
Tue Oct 04, 2016 1:51 pm
Forum: SMALL BOAT ELECTRICAL
Topic: 210 Montauk: Installation of Electronics on Helm Dashboard
Replies: 18
Views: 6742

Re: Installation of Electronics on 210 MONTAUK

I agree, screen real-estate gets used up very quickly. The console on the 210 Montauk is not very large it only measures 19 W x 9 H (all in inches), and, because Boston Whaler mounted the USB and Aux ports in the console, the real usable space is 19 W x 7 H. (See below). The HDS-9 is 10.5 W x 6.65 H...
by Ridge Runner
Mon Oct 03, 2016 7:05 pm
Forum: PERFORMANCE
Topic: 210 Montauk Evinrude 200 H.O. G2
Replies: 16
Views: 6932

Re: 210 Montauk Evinrude 200 H.O. G2

I am very excited to see how this boat/motor combination will run. Propeller selection might be a bit of a challenge. I was going to go with the new Evinrude RX4 propeller, but after some researching and talking to BRP, one of the strengths of this propeller is that "it delivers superior bow li...
by Ridge Runner
Sat Oct 01, 2016 11:48 am
Forum: PERFORMANCE
Topic: 210 Montauk Evinrude 200 H.O. G2
Replies: 16
Views: 6932

Re: 210 Montauk Evinrude 200 H.O. G2

It will be interesting to see how it compares in performance to the 210 Montauk rigged with the Mercury XL L6 DTS. [Remarks about electronics are moved to SMALL BOAT ELECTRICAL.--jimh] The boat will have digital controls and the propeller will be an Evinrude RX4. BTW - my 170 Montauk with the E-TEC ...
by Ridge Runner
Fri Sep 30, 2016 3:27 pm
Forum: PERFORMANCE
Topic: 210 Montauk Evinrude 200 H.O. G2
Replies: 16
Views: 6932

210 Montauk Evinrude 200 H.O. G2

The deal for repowering a new Boston Whaler 210 MONTAUK with a Mercury OptiMax 200 engine fell through. I went down the path of doing this with a G1 E-TEC. In the end, after much deliberation, I decided to go with a G2 E-TEC 200 H.O. I have purchased the boat and paid for the upgrade on the engine. ...
by Ridge Runner
Wed Sep 28, 2016 9:48 pm
Forum: The GAM
Topic: Highway Speed When Towing
Replies: 12
Views: 4764

Re: Highway Speed When Towing

Up and down the I-95 corridor, I generally travel at the speed limit or slightly over. The top speed limit is 70MPH. I have Kumho Radial 857 tires on my trailer they are a Q-speed rated (up to 99MPH) - load range D trailer tire.