Search found 374 matches

by dtmackey
Fri Dec 21, 2018 8:19 am
Forum: REPAIRS and MODIFICATIONS
Topic: 1987 Montauk 17 Rub Rail Gap
Replies: 6
Views: 1937

Re: 1987 Montauk 17 Rub Rail Gap

Found it on my first search:
https://youtu.be/turAg79PcRs

D-
by dtmackey
Tue Dec 18, 2018 8:19 am
Forum: PERFORMANCE
Topic: XD100 instead of TCW3 Oil in Older Engine
Replies: 10
Views: 5196

Re: XD100 instead of TCW3 Oil in Older Engine

I think you’d be hard pressed to find anyone that works at Evinrude that is familiar with 1968 motors or that Evinrude would even test an oil from 2004+ on a motor nearly 4 decades old. I will say that oils back in 1968 were not high tech and some motors ran 50:1 or even morel oil than that. As time...
by dtmackey
Sun Dec 16, 2018 10:09 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Now Available - Testing the Waters: Electrical Junction Box Group Buy
Replies: 14
Views: 4228

Re: Testing the Waters: Electrical Junction Box Group Buy

A little update. Stainless screws were ordered and now I'm working with the supplier on the boxes which is taking longer than expected. They are now telling me the color is grey, but the 2 boxes I've received are clearly tan (as in the pics). Once I straighten this out, I'll get them ordered and it ...
by dtmackey
Fri Dec 14, 2018 3:22 pm
Forum: The GAM
Topic: Assessment of c.1984 CENTER CONSOLE 15 with 70-HP
Replies: 16
Views: 3673

Re: Assessment of c.1984 CENTER CONSOLE 15 with 70-HP

Making it look like new is where you will increase value. As for changes to the boat, I made changes to the woodwork and based on feedback from others, it made the boat more desirable/valuable to some (yes, I've been offered far more than book value to sell it). I refused $12K for my 32 year old boa...
by dtmackey
Fri Dec 14, 2018 8:52 am
Forum: REPAIRS and MODIFICATIONS
Topic: 15 Classic project - Sydney AUSTRALIA
Replies: 1
Views: 1026

Re: 15 Classic project - Sydney AUSTRALIA

I think you forgot something.... the pics.

D-
by dtmackey
Thu Dec 13, 2018 10:26 pm
Forum: The GAM
Topic: Assessment of c.1984 CENTER CONSOLE 15 with 70-HP
Replies: 16
Views: 3673

Re: Assessment of c.1984 CENTER CONSOLE 15 with 70-HP

Looked for the 15 center console for a couple years and they all sold very quick and I consider them to be the holy grail of the Whaler 15 models. I wouldn't hesitate to purchase the one you've shared if it checks out. The John-Rude motors are great motors and simple, but they tend to be a little lo...
by dtmackey
Tue Dec 11, 2018 11:06 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Rage Jet Drive Cooling Modification
Replies: 5
Views: 2044

Re: Rage Jet Drive Cooling Modification

My son has a Waverunner with an engine that has close to the same power as your Whaler. Never has it had a problem with an overtemp condition, but it also does not have poppet valves or a thermostat. The water runs freely to cool the motor. Rather than complicate a simple 2 stroke motor, I'd look in...
by dtmackey
Tue Dec 11, 2018 10:42 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Now Available - Testing the Waters: Electrical Junction Box Group Buy
Replies: 14
Views: 4228

Re: Testing the waters for Whaler Sport Lighting Junction Box

OK guys, I'm going to order in 15 boxes and probably keep several for myself for future Whaler projects. The boxes are shipped in from overseas and the fasteners from another supplier are 316 stainless. Once everything arrives, I may be able to trim the price a bit, but need to cover my costs. If I ...
by dtmackey
Mon Dec 10, 2018 10:11 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Now Available - Testing the Waters: Electrical Junction Box Group Buy
Replies: 14
Views: 4228

Now Available - Testing the Waters: Electrical Junction Box Group Buy

In my project 15' thread, there seemed to be interest in the lighting junction box and I was unable to find the supplier when asked. I've been able to locate more and can buy in bulk and also order in stainless screws (it comes with steel), so it will not rust shut. These are gasketed boxes and good...
by dtmackey
Thu Dec 06, 2018 8:26 pm
Forum: REPAIRS and MODIFICATIONS
Topic: 2006 Ventura: Replacing Hydraulic Steering Hoses
Replies: 16
Views: 3385

Re: 2006 Ventura: Replacing Hydraulic Steering Hoses

Verado power steering hose replacement seems to be a topic with a number of threads on the Verado forum with failures. It is recommended that if you are running the OEM Verado hoses that you install something over it to protect from the UV exposure since they do crack and fail. Go OEM if you want si...
by dtmackey
Wed Dec 05, 2018 10:37 pm
Forum: PERFORMANCE
Topic: RAGE 14 and RAGE 15
Replies: 1
Views: 3381

Re: RAGE 14 and RAGE 15

I'm very interested to hear from Whaler owners since my experience with other jet power boats and PWC is it can be difficult to modulate power and speed at speeds at or slightly above planing speed since a jet drive does not have a "bite" on the water like an outboard propeller.

D-
by dtmackey
Wed Dec 05, 2018 10:32 pm
Forum: MARKETPLACE
Topic: FS: 1977 SPORT 15 with Yamaha 70, $3,900 in North Carolina
Replies: 7
Views: 2846

Re: 1977 Boston Whaler 15' Sport with 70 hp Yamaha

I'm a mahogany guy for Whaler interiors, but I will say those seats look very comfortable. A Yamaha 70 is an ideal motor for the 15-footerr based on minimal weight and longevity.

D-
by dtmackey
Wed Dec 05, 2018 10:21 pm
Forum: The GAM
Topic: Whaler Harpoon Sailboat
Replies: 4
Views: 1693

Re: Whaler Harpoon Sailboat

My pick for a Whaler Harpoon sailboat would be the 4.6 model. Clean open design that's similar in design to other "one design" sailboats that have a cult like following and successful history in sailboat racing series. Whaler never was accepted into a one design fleet, due to low productio...
by dtmackey
Wed Dec 05, 2018 10:06 pm
Forum: The GAM
Topic: Remember the Whaler Squall
Replies: 2
Views: 1151

Remember the Whaler Squall

Back in the 70s and into the early 80s the Boston Whaler SQUALL boats were plentiful around here, but I can't remember the last time I've seen one. Back in the day it was a solid boat and even had a sail kit option, but since the introduction of rigid-inflatable-bottom boats and inflatable-type smal...
by dtmackey
Wed Dec 05, 2018 9:36 pm
Forum: REPAIRS and MODIFICATIONS
Topic: 2006 Ventura: Replacing Hydraulic Steering Hoses
Replies: 16
Views: 3385

Re: 2006 Ventura: Replacing Hydraulic Steering Hoses

After you install the new hoses it might be worth buying some split loom and covering them to protect from the UV light. I find that the loom takes the abuse and the plastic or rubber it protects lasts a lot longer.

D-
by dtmackey
Wed Dec 05, 2018 9:33 pm
Forum: The GAM
Topic: Docking and Berthing
Replies: 4
Views: 1711

Re: Docking and Berthing

Not to be confused with birthing, which has nothing to do with boats.

D-
by dtmackey
Sun Dec 02, 2018 9:49 am
Forum: REPAIRS and MODIFICATIONS
Topic: Carburetor Orifice Size; Cause of Aural Alert Alarm
Replies: 13
Views: 2462

Re: Carburetor Orifice Size; Cause of Aural Alert Alarm

Yes, dry fit on head gasket.

D-
by dtmackey
Wed Nov 28, 2018 9:41 pm
Forum: The GAM
Topic: 1800's Navigation aid succumbs to storm
Replies: 2
Views: 957

1800's Navigation aid succumbs to storm

I was saddened to see a local daymark navigation aid, that was in disrepair for several years, finally collapse into the sea earlier this month during a nor'easter storm. Erected in the early 1800s, this mark has stood the test of time, weathering many hurricanes, Blizzard of 78, The Perfect Storm a...
by dtmackey
Tue Nov 27, 2018 12:14 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Carburetor Orifice Size; Cause of Aural Alert Alarm
Replies: 13
Views: 2462

Re: Loose Magnets

Older Johnson and Evinrudes had problems with the adhesive that held the magnets on. Problem shows up after the motor starts getting older. Many people have epoxied them back on.

D-
by dtmackey
Sun Nov 25, 2018 9:34 pm
Forum: The GAM
Topic: Nice anchor idea for smaller Whalers
Replies: 10
Views: 2875

Re: Nice anchor idea for smaller Whalers

kwik_wurk wrote:So does that setup fit into the anchor locker of a classic Montauk?


It fits in the forward locker of a classic 15' Whaler. I'd expect the 17' locker to be as big or bigger.

D-
by dtmackey
Sun Nov 25, 2018 9:32 pm
Forum: SMALL BOAT ELECTRICAL
Topic: Choke Solenoid OMC 1994 Wiring
Replies: 8
Views: 3751

Re: Choke Solenoid OMC 1994 Wiring

[Should there] be 12-Volts on the violet wire with the key pushed in and not turned? The fuel enrichment solenoid receives 12V when the key is on and you push the key inward. I find it works best if you turn the key on, push in for 2 seconds and then turn the key with the key held in until the engi...
by dtmackey
Mon Nov 19, 2018 10:23 pm
Forum: PERFORMANCE
Topic: 13 GLS and Large Stern Wave
Replies: 12
Views: 5524

Re: 13 GLS and Large Stern Wave

We live on the ICW and see a lot of wakes. We see the least damaging wakes from boats that are either fully on plane or running at idle speed. The worst wakes come from large sport yachts plowing along at their minimal planing speed. I find it difficult to understand operators who spend a lot of ti...
by dtmackey
Tue Nov 13, 2018 10:55 pm
Forum: PERFORMANCE
Topic: Re-power SUPER SPORT 15 with 115-HP
Replies: 14
Views: 7354

Re: Re-power SUPER SPORT 15 with 115-HP

If someone was hell bent on getting a few more MPH's out of their 15, and didn't want to go through MAJOR hull modifications and costs, I would say an older 70 or 90 hp Yamaha 2-stroke with some motor modifications would be the way to go. I think there are still some people making high compression ...
by dtmackey
Tue Nov 13, 2018 10:18 pm
Forum: PERFORMANCE
Topic: Re-power NAUSET 16: Yamaha 90 or E-TEC 90
Replies: 4
Views: 4077

Re: Re-power NAUSET 16: Yamaha 90 or E-TEC 90

While the E-TEC 90 is a good engine, clean high quality fuel is a must for any direct-injected two-stroke engine. [Soho] mentioned living outside the country and depending on where that is, service could be a concern, but [Soho] also mentioned knowing the mechanics and also owning a E-TEC G2 300-HP,...
by dtmackey
Mon Nov 12, 2018 10:38 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Waviness and Spider Cracking in c.1989 Boat
Replies: 2
Views: 1320

Re: Waviness and Spider Cracking in c.1989 Boat

Not familiar with waviness in the transom, but I've seen it in the hull sides in 13, 15 and 17 sport models - as Jim says, more common in larger baots. I think this is a function of pumping in expandable foam and it flexing the outer skin as it expands and I do not consider this a problem at at all....
by dtmackey
Mon Nov 12, 2018 10:03 pm
Forum: PERFORMANCE
Topic: SPORT 13 with 9.9-HP
Replies: 17
Views: 6291

Re: SPORT 13 with 9.9-HP

My vote would be for a Yamaha two-stroke 9.9-HP, since they can be easily bumped to a 15-HP, and from the outside no one can tell. I have one that this was done and also a Yamaha 25 two-stroke with 15 decals. Not to mention, the two-stroke has better torque down low--in case there are several people...
by dtmackey
Fri Nov 09, 2018 10:29 pm
Forum: MARKETPLACE
Topic: FS: S O L D ... 2013 150 Super Sport, Now with price and location
Replies: 3
Views: 1559

Re: 2013 Boston Whaler 150 Super Sport loaded and mint!

I did not see an asking price, so Is the boat being listed with a mystery price or offered up as free? If the boat is free, I'd like first right of refusal.

D-
by dtmackey
Tue Nov 06, 2018 6:16 pm
Forum: The GAM
Topic: Cooper Engines
Replies: 2
Views: 925

Re: Cooper Engines

I've made the assumption that the Coopers you refer to were followed by the Cooper Bessemer line on which I received some excellent training in 1971. Yep, those were the Coopers I was referring to. We had the 6cyl versions and I believe they also had a 7 and 8 cyl offering in normally aspirated and...
by dtmackey
Tue Nov 06, 2018 6:04 pm
Forum: The GAM
Topic: November Gales
Replies: 21
Views: 4579

Re: November Gales

...There was not much oil pollution from the sinking because at the water temperatures on the bottom of Lake Superior the bunker oil is not particularly likely to flow... Hi Jim--when you refer to bunker oil, I'm assuming you mean bunker C due to its thick state in the depths and temps of lake Supe...
by dtmackey
Mon Nov 05, 2018 10:16 pm
Forum: The GAM
Topic: November Gales
Replies: 21
Views: 4579

Re: November Gales

Thanks for sharing Jim, I love that song and have looked into the sinking many years ago. The USCGC Buoy Tender Woodrush rushed to her aid, but it was far to late. Woodrush was WLB-407, and I served on USCGC Spar WLB-403, nearly the same, except for mission specific modifications. I know the buoy te...
by dtmackey
Thu Nov 01, 2018 10:04 am
Forum: REPAIRS and MODIFICATIONS
Topic: After Impeller Change, Gear Case Always in Forward
Replies: 10
Views: 2357

Re: After Impeller Change, Gear Case Always in Forward

Your shift shaft alignment moved when you had the lower unit removed and you need to realign. I do not have the install instructions, but you need to repeat the process and follow the Merc shop manual for shift shaft alignment.

D-
by dtmackey
Wed Oct 31, 2018 5:23 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Drying Wet Foam with Vacuum Pump
Replies: 3
Views: 1451

Re: Drying Wet Foam with Vacuum Pump

I ran into this company years ago and wondered if their service worked as good as they claimed. Wet cores can are difficult dry dry out, but I believe some improvement can be made.

http://www.dryhull.com/

D-
by dtmackey
Tue Oct 30, 2018 9:13 pm
Forum: The GAM
Topic: What's New
Replies: 12
Views: 12227

Re: What's New

Big changes in leadership at Brunswick are described in a brief summary. See Mark Scwhabero to Retire as Brunswick CEO http://continuouswave.com/forum/viewtopic.php?f=4&t=839#p22495 I'm glad you pointed out the retirement of another notable leader of Brunswick. Since the retirement of Patrick M...
by dtmackey
Fri Oct 26, 2018 3:24 pm
Forum: The GAM
Topic: Tucked the Whaler in for winter season
Replies: 6
Views: 1775

Re: Tucked the Whaler in for winter season

Do what I did. Find a corner in the back yard that the admiral isn't using for flowers. Have an Amish built garage delivered, as they are movable no permits and foundation is needed, they are set on blocks. Back the boat in during the winter, put cover on and the car garage is free for both cars to...
by dtmackey
Fri Oct 26, 2018 8:58 am
Forum: The GAM
Topic: Tucked the Whaler in for winter season
Replies: 6
Views: 1775

Re: Tucked the Whaler in for winter season

fno wrote:I'd leave the cars outside. They have way less "fun" value. But I do understand your dilemma.


Laughing.

I'll leave my wife's car outside (Whaler inside) next time we are expecting freezing rain or 14" of snow and when she loses her mind, I'll send her your way. ;-)

D-
by dtmackey
Fri Oct 26, 2018 8:54 am
Forum: REPAIRS and MODIFICATIONS
Topic: Water pump impeller price and quality
Replies: 16
Views: 3956

Re: Water pump impeller price and quality

I think we can all agree that as an impeller ages it: - Sees additional wear from use - The rubber dries out and vanes can crack - The mechanical bond with the internal collar can weaken (yes, I posted a failure of a new impeller, but that is rare) So if we all can agree that an aging impeller sees ...
by dtmackey
Thu Oct 25, 2018 10:34 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Water pump impeller price and quality
Replies: 16
Views: 3956

Re: Water pump impeller price and quality

The weight of the gear case and the complexity of re-installing everything correctly are two reasons why I hire an experienced and trained mechanic to service the water pump on my relatively new 2010 E-TEC engine. I don't blame you for going to the dealer. The Etec does take more time and effort th...
by dtmackey
Thu Oct 25, 2018 10:28 pm
Forum: PERFORMANCE
Topic: Re: OUTRAGE 18 with Yamaha 150-HP
Replies: 8
Views: 4586

Re: Re-power OUTRAGE 18 on a Budget

The Yamaha carburetor 150, 175, 200 models are all the same 2.6-liter block, and they are one of the best running motors out there. I've owned two over the years, and Yamaha carbration is spot on. They idle smoother than any other carburetor motor out there, so you will not be disappointed. Post-199...
by dtmackey
Tue Oct 23, 2018 9:17 pm
Forum: The GAM
Topic: Nice anchor idea for smaller Whalers
Replies: 10
Views: 2875

Re: Nice anchor idea for smaller Whalers

With that setup how do you fasten the bitter end of the anchor rode to the boat? Hi Tom - Whaler is typically anchored in shallows, so no concern with the lack of the bitter end being secured since there's no risk of losing the entire rig over the side. If I was in deeper water and the risk of the ...
by dtmackey
Tue Oct 23, 2018 9:04 pm
Forum: The GAM
Topic: Nice anchor idea for smaller Whalers
Replies: 10
Views: 2875

Re: Nice anchor idea for smaller Whalers

Is it highly durable? BTW, is it safe to bring a dog on board then have them stay in a dog cage throughout the journey? Not sure what to make of this post. Yes, the anchor setup is highly durable. As for the dog, ours does not use a crate and simply sleeps in her bed and has free reign of whatever ...
by dtmackey
Tue Oct 23, 2018 8:59 pm
Forum: The GAM
Topic: Tucked the Whaler in for winter season
Replies: 6
Views: 1775

Re: Tucked the Whaler in for winter season

Look good and seems to fit nice in that shop, why the shrink wrap and talking about snow? The boat is now outside in my backyard and I'll haul it to the property in NH where I store things. The shop is my garage and reserved for cars in the snowy season. Here in the Boston area we've already seen a...
by dtmackey
Sun Oct 21, 2018 3:23 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Restoring Shine Finish to Gel Coat Resin
Replies: 12
Views: 3186

Re: Restoring Shine Finish to Gel Coat Resin

Not trying to take this off-topic, but for a badly oxidized hull I'll share my experience. 18 year old Nordic Tug, green hull which the boatyard no longer offered to buff the hull since they said the gloss was gone and could not be restored. They wanted to Awlgrip the boat and quotes came in far too...
by dtmackey
Sun Oct 21, 2018 3:01 pm
Forum: The GAM
Topic: Nice anchor idea for smaller Whalers
Replies: 10
Views: 2875

Nice anchor idea for smaller Whalers

Figured I'd share my anchor setup with others because I feel this is a great way to keep the line tidy and easy to use. I have 75' of line on a extension cord reel with 6' of 316 stainless chain with a quick connect to the anchor. I will be splicing in a stainless thimble and use a shackle to connec...
by dtmackey
Sun Oct 21, 2018 2:53 pm
Forum: The GAM
Topic: Tucked the Whaler in for winter season
Replies: 6
Views: 1775

Tucked the Whaler in for winter season

Built a quick backbone from 2X4 and strapping and shrink wrapped over that with 7mil material. I went extra tall in case I need to cut a door into it over the winter if I need access. I shrink-wrap the engine and lower unit to prevent water and snow from getting into the propeller hub, and I also co...
by dtmackey
Sun Oct 21, 2018 2:48 pm
Forum: REPAIRS and MODIFICATIONS
Topic: SeaFoam and Marine Engines
Replies: 15
Views: 3238

Re: SeaFoam and Marine Engines

Since the E-TEC engines delivers such a small amount of fuel directly to the combustion chamber only, is there any real advantage to using Seafoam or another de-carbon additive? Not to mention that the XD100 is a super-clean-burning oil and not injected in an over-rich condition much like the old VR...
by dtmackey
Sun Oct 21, 2018 2:35 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Tilt Position for Outboard Engine in Saltwater
Replies: 7
Views: 1770

Re: Tilt Position for Outboard Engine in Saltwater

Don - I'd take the advise the dealer provided with a grain of salt. The pressure of the exhaust will prevent water from entering into the exhaust tube. Besides, how fast does one need to operate in reverse? Haven't heard of there being a problem on the Merrimac River where boats must back out of the...
by dtmackey
Mon Oct 15, 2018 9:37 pm
Forum: REPAIRS and MODIFICATIONS
Topic: What Solvent To Soak Power Head Before Reinstallation
Replies: 4
Views: 1470

Re: What Solvent To Soak Power Head Before Reinstallation

For degreasing motors from outboards, snowmobiles, quads and more, I've always used Purple Power full strength with a brush and it takes everything off. I then rinse with a hose and then spray with air to remove any water, followed by spraying oil on any cylinder liners or other steel/cast iron part...
by dtmackey
Thu Oct 11, 2018 10:43 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Hull Sweating
Replies: 5
Views: 1891

Re: Hull Sweating

Happens a lot in this area when we have cold nights and then a warm humid day. The hull retains the cold and the moisture in the humid air condenses on the hull. Spring and fall seems to be the times when it is the most common since the temps from night to day swing quite a bit.

D-
by dtmackey
Mon Oct 08, 2018 10:19 pm
Forum: The GAM
Topic: Montauk Mooring
Replies: 9
Views: 2832

Re: Montauk Mooring

Mushrooms are a good out-of-the-box option, but my concern with any mooring anchor has always been the weak link of where the chain attaches to the mooring itself, and corrosion, which seems to be accelerated when submerged in mud (at least here in Puget Sound). I use a 5-gallon bucket or a large t...