Search found 1592 matches

by Jefecinco
Tue Aug 22, 2023 10:58 am
Forum: PERFORMANCE
Topic: 1993 Outrage 21 Re-power
Replies: 4
Views: 2016

Re: 1993 Outrage 21 Re-power

Honda is now selling a 350 HP outboard engine. That could be something to consider.
by Jefecinco
Fri Aug 18, 2023 10:25 am
Forum: PERFORMANCE
Topic: Zipwake Trim Devices
Replies: 12
Views: 2898

Zipwake Trim Devices

A Panbo article discussing the installation of Zipwake interceptor hull attitude devices was very interesting. The devices appear to automatically maintain boat trim while under way. I would like to know if any Continuouswave participants have installed or have experience with the Zipwake [vertical ...
by Jefecinco
Fri Aug 18, 2023 10:13 am
Forum: The GAM
Topic: Source for Suntop Straps
Replies: 2
Views: 1938

Re: Source for Suntop Straps

At one time West Marine sold strap material by the foot. A site search a few moments ago didn't show them but it could be worth a visit to a nearby store. I saw them in the area with bulk cordage.
by Jefecinco
Sun Aug 13, 2023 10:53 am
Forum: The GAM
Topic: 190 NANTUCKET Seats
Replies: 4
Views: 2125

Re: 190 NANTUCKET Seats

Yeti is a very high end cooler designed to maintain low temperatures much longer than the typical Igloo or Coleman cooler. If you need a cooler for three days or longer the Yeti could be for you although there are other high end coolers claiming similar performance at lower cost. Check the cooler ma...
by Jefecinco
Mon Aug 07, 2023 10:49 am
Forum: The GAM
Topic: Inspect Steering System Periodically
Replies: 5
Views: 2487

Re: Inspect Steering System Periodically

Very nice model!
by Jefecinco
Sun Aug 06, 2023 10:50 am
Forum: The GAM
Topic: Inspect Steering System Periodically
Replies: 5
Views: 2487

Re: Inspect Steering System Periodically

The press has either not learned of the accident or are disinterested. Stauter-Built boats are wooden boats. From our perspective on the opposite bank of the waterway we couldn't see the bow but the boat "appeared" to be repairable. I hope it will be repaired since the marque is not seen o...
by Jefecinco
Fri Aug 04, 2023 10:05 am
Forum: The GAM
Topic: 2012 130 Super Sport Trailer in Naples, Florida Area
Replies: 10
Views: 4136

Re: 2012 130 Super Sport Trailer in Naples, Florida Area

I believe the Karavan trailers sold with Boston Whaler boats do not have keel rollers.
by Jefecinco
Sun Jul 30, 2023 11:15 am
Forum: The GAM
Topic: Inspect Steering System Periodically
Replies: 5
Views: 2487

Inspect Steering System Periodically

In the late afternoon of July 29, 2023 I witnessed a terrible accident on the Atlantic Intracoastal Water Way. Two apparently teenage boys were aboard a classic "Stauter-Built" wooden center console skiff proceeding on the [AIWW] at speed. Suddenly the boat made a 90-degree turn and slamme...
by Jefecinco
Thu Jul 27, 2023 11:53 am
Forum: SMALL BOAT ELECTRICAL
Topic: Perko Battery Swtich Needs replacing
Replies: 6
Views: 2110

Re: Perko Battery Swtich Needs replacing

BEP is not famous for reliability.
by Jefecinco
Thu Jul 27, 2023 11:51 am
Forum: REPAIRS and MODIFICATIONS
Topic: Cutting Unibond Hull in Half to Add Length
Replies: 5
Views: 2198

Re: Cutting Unibond Hull in Half to Add Length

Local - I believe the result would be a ruined hull. You may be able to do it but the chances of success are virtually nil. If you want a larger boat get another boat.
by Jefecinco
Sat Jul 22, 2023 10:22 am
Forum: The GAM
Topic: 25-footer for Texas Coast
Replies: 8
Views: 2368

Re: 25-footer for Texas Coast

The Dauntless series are more family boating oriented whereas the Outrage boats are more oriented toward fishing. Having said that, we owned a 16 foot Dauntless that was a great little fishing boat and there are many larger Dauntless boats used primarily for fishing. The Dauntless is highly adaptabl...
by Jefecinco
Wed Jul 19, 2023 10:56 am
Forum: REPAIRS and MODIFICATIONS
Topic: Length of fill hose and vent hose for 2007 Dauntless 180
Replies: 4
Views: 2068

Re: Length of fill hose and vent hose for 2007 Dauntless 180

Tie a "pull string" to the old hose before pulling it out to measure it. Use the string to pull the new hose into position.
by Jefecinco
Wed Jul 19, 2023 10:51 am
Forum: The GAM
Topic: New Laminating Resin to be Used by Boston Whaler
Replies: 2
Views: 2131

Re: New Laminating Resin to be Used by Boston Whaler

Excellent information.

It's good to see you continue to write without holding back what you really think.
by Jefecinco
Sat Jul 15, 2023 10:48 am
Forum: The GAM
Topic: 1964 NAUSET Insurance Value for Total Loss
Replies: 10
Views: 2338

Re: 1964 NAUSET Insurance Value for Total Loss

I would check with other insurance companies. However, you should expect to have to have a "value survey" done before any of them will sign up for an agreed value policy at or above the $20,000 level. Some companies also require additional periodic surveys to maintain the coverage. A high ...
by Jefecinco
Sun Jul 02, 2023 10:20 am
Forum: REPAIRS and MODIFICATIONS
Topic: 2000 Mercury FourStroke 90 Voltage Regulator
Replies: 12
Views: 2948

Re: 2000 Mercury FourStroke 90 Voltage Regulator

I find myself using "Britishisms" at times and chalk it up to marrying a Brit forty-five years ago. I consider myself to be bilingual.
by Jefecinco
Wed Jun 21, 2023 10:33 am
Forum: REPAIRS and MODIFICATIONS
Topic: 1972 Currituck Switch to Center Console
Replies: 7
Views: 2237

Re: 1972 Currituck Switch to Center Console

I believe scalable drawings are available which include wood consoles. Some may be adaptable to meet your requirements. Kits, as far as I know, are unavailable. A competent carpenter should be able to cut the required pieces for assembly. For a slightly higher cost a carpenter my be willing to assem...
by Jefecinco
Mon Jun 05, 2023 10:18 am
Forum: The GAM
Topic: Moeller 22-gallon On-deck Fuel Tank on 1995 DAUNTLESS 15
Replies: 3
Views: 2184

Re: Moeller 22-gallon On-deck Fuel Tank on DAUNTLESS 15

I have noticed that virtually all the expansion of our Moller six gallon tank is vertical. This may be a feature of the design.
by Jefecinco
Sun Jun 04, 2023 10:27 am
Forum: REPAIRS and MODIFICATIONS
Topic: Mercury 90 FOURSTROKE Lubrication Fitting
Replies: 4
Views: 1940

Re: Mercury 90 FOURSTROKE Lubrication Fitting

You may also try applying pressure with a grease gun attached to the zerk fitting while a helper moves the steering fully left to right and back several times. If this fails apply heat as suggested by jimh.
by Jefecinco
Wed May 24, 2023 10:07 am
Forum: The GAM
Topic: 190 Montauk Railing Source
Replies: 6
Views: 3065

Re: 190 Montauk Railing Source

Is the 190 Montauk no longer manufactured? I'm surprised you cannot get a railing through a Boston Whaler dealer.
by Jefecinco
Wed May 17, 2023 10:02 am
Forum: The GAM
Topic: Website Updates
Replies: 11
Views: 7447

Re: Website Updates

I doubt any of us will be terribly inconvenienced by losing access to the data. I enjoy your site as a place to learn and to share some of what I've learned. I suspect your other members have similar motivations for being here. I also enjoy the fellowship.
by Jefecinco
Fri May 05, 2023 10:13 am
Forum: REPAIRS and MODIFICATIONS
Topic: 1982 STRIPER 15 Seat Modification
Replies: 5
Views: 895

Re: 1982 STRIPER 15 Seat Modification

I don't see that drilling your thwart is a big deal or that it will affect the value in any way. The boat is a driver, rather than a museum piece. If you sell the boat you will probably find the buyer would welcome having more comfortable seating. A hole repair, should it become desirable, is relati...
by Jefecinco
Fri Apr 28, 2023 10:30 am
Forum: The GAM
Topic: Decision to Restore or Leave As-Is for 1969 13-footer
Replies: 4
Views: 2287

Re: Decision to Restore or Leave As-Is for 1969 13-footer

That looks like a nice Sport 13. I believe it will look better and be more desirable to a future Classic Boston Whaler aficionado than a refinished, restored 13. Our 1981 Sport 13 is all original except for a four stroke engine and has a few dings and some spider cracks. It looks good if not perfect...
by Jefecinco
Sat Apr 15, 2023 12:23 pm
Forum: PERFORMANCE
Topic: SPORT 15 with Suzuki DF60a Performance Data
Replies: 12
Views: 3396

Re: SPORT 15 with Suzuki DF60a Performance Data

WOT speed of 43 MPH in your Sport 15 must have been exciting.
by Jefecinco
Tue Apr 11, 2023 10:49 am
Forum: The GAM
Topic: Assess Boat, Engine, Trailer Combination
Replies: 5
Views: 2536

Re: Assess Boat, Engine, Trailer Combination

The SUZUKI DF175 should be adequate power. Dauntless boats are rather well known for being a bit low in the water at the transom. The true test of how low is to put the boat in the water with a full fuel tank and approximate weight you would expect to have aboard. Perhaps two adult men at the consol...
by Jefecinco
Sun Apr 09, 2023 11:20 am
Forum: PERFORMANCE
Topic: Compensating for Added Engine Weight
Replies: 4
Views: 2368

Re: Compensating for Added Engine Weight

Moving the battery forward will not change the weight. It can change the center of gravity.
by Jefecinco
Wed Apr 05, 2023 11:00 am
Forum: The GAM
Topic: 2000 Dauntless center console- Need straps for cooler seat
Replies: 5
Views: 2585

Re: 2000 Dauntless center console- Need straps for cooler seat

The cooler hold-downs on our 1999 Dauntless 16 center console were rubber bungee-type cords with hooks on the ends. Bungee cords may serve as a substitute if you are unable to locate the correct cords.
by Jefecinco
Wed Mar 29, 2023 9:31 am
Forum: The GAM
Topic: Repowering 2000 Dauntless 18
Replies: 18
Views: 8318

Re: Repowering 2000 180 Dauntless

A smart propeller selection can eliminate or lessen a Dauntless hull's tendency for the bow to ride high.
by Jefecinco
Wed Mar 29, 2023 9:27 am
Forum: The GAM
Topic: Sources for Leaning Post for 1997 OUTRAGE 20
Replies: 6
Views: 2993

Re: Sources for Leaning Post for 1997 OUTRAGE 20

We often used the RPS in it the next-to-forward-most position as a leaning post when on plane. An advantage of an adjustable leaning post allows it to be used as a seat when in a lowered position. Many, or most, leaning posts have a lowish back rest. Possibly to prevent anyone losing their seating b...
by Jefecinco
Sat Mar 25, 2023 11:28 am
Forum: PERFORMANCE
Topic: 2001 DAUNTLESS 16 Suzuki DF140BG: will report on performance in future post
Replies: 6
Views: 2635

Re: 2001 DAUNTLESS 16 Suzuki DF140BG

Congratulations on your purchase of an exceptionally fine boat. I'm sure you will enjoy the very spirited performance of the boat with the 140 Suzuki engine.
by Jefecinco
Fri Mar 24, 2023 11:07 am
Forum: The GAM
Topic: SEAKEEPER RIDE: Automatically-operating Trim Tabs to Reduce Roll and Pitch
Replies: 7
Views: 3876

Re: SEAKEEPER RIDE: Automatically-operating Trim Tabs to Reduce Roll and Pitch

The several user reviews I've read on Seakeeper have been very positive. However, after spending several thousand dollars to have a device permanently installed in one's boat it may be difficult to admit it may not be as good as hoped for.
by Jefecinco
Thu Mar 23, 2023 10:58 am
Forum: The GAM
Topic: SEAKEEPER RIDE: Automatically-operating Trim Tabs to Reduce Roll and Pitch
Replies: 7
Views: 3876

Re: SEAKEEPER RIDE: Automatically-operating Trim Tabs to Reduce Roll and Pitch

For coastal and inland boaters, except for those boating on large lakes and bays, it's difficult to believe the price will become low enough for the devices to enjoy many sales.
by Jefecinco
Tue Mar 21, 2023 10:23 am
Forum: The GAM
Topic: Buying Experience with York County Marine
Replies: 5
Views: 3775

Re: Buying Experience with York County Marine

York County Marine can tell you how long it takes to get a boat. They probably have inbound boats with firm expected delivery dates. Spring is prime selling season so they may be expecting several. If you must have a boat with some exact options it could extend the wait time. If an inbound boat has ...
by Jefecinco
Mon Mar 20, 2023 10:32 am
Forum: REPAIRS and MODIFICATIONS
Topic: 150 Montauk Convert to Split Bow Rail
Replies: 3
Views: 1011

Re: 150 Montauk Convert to Split Bow Rail

If you have the split bow rail on hand perform a visual check. If you do not have the split bow rail you can have your existing bow rail modified to meet your needs. I believe you will find it quite difficult to locate an already-made split bow rail to fit your 150 Montauk hull original bow rail mou...
by Jefecinco
Sun Mar 19, 2023 11:13 am
Forum: The GAM
Topic: 150 Montauk: Optional Stern Seat
Replies: 3
Views: 2644

Re: 150 Montauk: Optional Stern Seat

If you can find the parts list for the boat it will show any optional equipment. From that you should be able to check online for avilability of the parts needed to install the seats. I've seen obsolete parts for Boston Whalers for sale on EBay. Good luck.
by Jefecinco
Tue Mar 07, 2023 11:11 am
Forum: The GAM
Topic: 170 MONTAUK Location of Chart Plotter
Replies: 5
Views: 2648

Re: 170 MONTAUK Location of Chart Plotter

I have had chart plotters both mounted on top of the console and flush mounted in the console. Neither were on 170 Montauks but that makes little difference to the discussion. The plotter flush mounted in in the console was more attractive. But, it was less functional. It required looking away from ...
by Jefecinco
Fri Feb 24, 2023 10:45 am
Forum: REPAIRS and MODIFICATIONS
Topic: Mercury 40-HP: Remedy for very stiff steering
Replies: 10
Views: 2943

Re: Mercury 40-HP: Remedy for very stiff steering

Using a hand held grease gun it should be possible to pump some solvent through the pivot tube zerk fitting to facilitate future lubrication.
by Jefecinco
Sun Feb 19, 2023 10:43 am
Forum: REPAIRS and MODIFICATIONS
Topic: 1996 DAUNTLESS [17]: Loose Steering Wheel
Replies: 8
Views: 2315

Re: 1996 DAUNTLESS [17]: Loose Steering Wheel

The youtube video is not useful for wheel hubs on helms of older boats that have not had the wheel removed for many years unless the shaft was well coated with grease when the wheel was last installed. Our 1981 Sport 13 is a good example. I've tried virtually everything I could think of to remove th...
by Jefecinco
Sat Feb 18, 2023 10:08 am
Forum: REPAIRS and MODIFICATIONS
Topic: E-TEC Engine: Maintenance History After Ten Seasons
Replies: 23
Views: 13492

Re: E-TEC Engine: Maintenance History After Ten Seasons

A concern with leaving old lower unit oil unchanged over the Winter is the possibility that any water in the gearcase will freeze and potentially damage any seals with which it is in contact.
by Jefecinco
Thu Feb 16, 2023 10:17 am
Forum: REPAIRS and MODIFICATIONS
Topic: 1996 DAUNTLESS 17 Fuel Fill Fitting Replacement Part
Replies: 5
Views: 1639

Re: 1996 DAUNTLESS 17 Fuel Fill Fitting Replacement Part

I owned 1999 center console Dauntless 16, and it had a similar fuel fill cap. We had problems filling the fuel tank. Our Boston Whaler dealer contacted Boston Whaler for a solution. At that time the solution was a vent hose kit which included a vent for hull mounting. I believe the existing [vent] h...
by Jefecinco
Wed Feb 15, 2023 10:32 am
Forum: The GAM
Topic: Unusual Vessel in Gulf Intracoastal Water Way
Replies: 6
Views: 3771

Re: Unusual Vessel

It looked somewhat similar to a couple of the photos. However, it lacked any obvious ramps. It was a typical river crossing ferry. Drive on, drive off at prepared sites on each side. We continue to use these in Alabama in some sparsely populated areas so people can cross a river to get medical care ...
by Jefecinco
Sat Feb 11, 2023 10:53 am
Forum: The GAM
Topic: Source for Off-the-shelf Cover to Fit 1981 OUTRAGE V-20 with T-Top
Replies: 5
Views: 2937

Re: Source for Off-the-shelf Cover to Fit 1981 OUTRAGE V-20 with T-Top

Because of the T-top and the RADAR and VHF antennas you may not be able to find a manufactured cover that provides a good fit. A custom cover will probably be the only alternative if exact fit is what you want.
by Jefecinco
Wed Feb 08, 2023 10:00 am
Forum: The GAM
Topic: Unusual Vessel in Gulf Intracoastal Water Way
Replies: 6
Views: 3771

Re: Unusual Vessel

Unfortunately no photo. I was upstairs and the telephone was downstairs. I can't seem to get into the habit of carrying the phone around.
by Jefecinco
Tue Feb 07, 2023 10:22 am
Forum: The GAM
Topic: Unusual Vessel in Gulf Intracoastal Water Way
Replies: 6
Views: 3771

Unusual Vessel in Gulf Intracoastal Water Way

Yesterday I saw a vessel on the Gulf Intracoastal Water Way that I've never seen before. It was a small ferry transporting a pair of Class C RVs. The pilothouse was midships to starboard and narrow. The ferry had no ramps so loading and unloading would require some planning. It was not a commercial ...
by Jefecinco
Tue Feb 07, 2023 10:13 am
Forum: The GAM
Topic: Endorsement of CARVER Boat Cover
Replies: 3
Views: 2861

Re: Endorsement of CARVER Boat Cover

Is the marine acrylic fabric you refer to Sunbrella fabric? I once tried a Sundura cover but was disappointed with it's performance. Carver allowed me to return it after a season of use and credited the cost against a replacement Sunbrella cover. I have never had better customer service than Carver'...
by Jefecinco
Sun Jan 29, 2023 11:08 am
Forum: REPAIRS and MODIFICATIONS
Topic: Source for Norman Pin
Replies: 3
Views: 1264

Re: Norman pin

The norman pin in the photo looks pretty good. Why do you want to replace it? Given the cost of a new non-OEM pin I would prefer to refurbish the original.
by Jefecinco
Tue Jan 24, 2023 10:17 am
Forum: PERFORMANCE
Topic: 1983 Outrage V-20 Re-power
Replies: 5
Views: 3594

Re: 1983 Outrage V-20 Re-power

Few things in boating are more disappointing than lacking the engine power to enjoy your experiences. Carefully examine the cost differences between buying a 150 or 200 HP engine. Installation costs should be virtually the identical. A used engine may be an option, especially if it has some kind of ...
by Jefecinco
Mon Jan 23, 2023 9:17 am
Forum: The GAM
Topic: Source for c.1971 Ribside 21 Railings
Replies: 3
Views: 1121

Re: Source for c.1971 Ribside 21 Railings

I would find a local fabricator and have the railings made. A person specializing in the fabrication of stainless steel boat tops should be able to do a fine job if provided with measured drawings or even photographs of the railings installed on another boat. Ask around a local marina to find a fabr...
by Jefecinco
Sun Jan 22, 2023 11:33 am
Forum: REPAIRS and MODIFICATIONS
Topic: UFLEX Steering Products
Replies: 5
Views: 1290

Re: UFLEX Steering Products

Our previous 190 Montauk with a 135HP Verado came equipped with Uflex hydraulic steering. It was a fine system. During our ten year ownership the steering hydraulic ram end cap seals failed twice. I replaced them both time and it was an easy mechanical task. Bleeding the hydraulics took longer than ...
by Jefecinco
Sat Jan 21, 2023 10:20 am
Forum: The GAM
Topic: Identify a Recessed Hull Lamp from Picture
Replies: 2
Views: 1092

Re: Identify a Recessed Hull Lamp from Picture

Is that a sealed beam automotive type light? If so, it may open other possibilities.
by Jefecinco
Fri Jan 13, 2023 10:22 am
Forum: The GAM
Topic: Hidden VIN on E-Z-LOADER Trailer
Replies: 7
Views: 4160

Re: Hidden VIN on EZ Loader trailer

Good to know, thank you.