Search found 359 matches
- Fri Jul 27, 2018 11:03 am
- Forum: The GAM
- Topic: Console remodel on 2004 Nantucket
- Replies: 13
- Views: 8684
Re: Console remodel on 2004 Nantucket
That’s first class!
- Thu Jul 19, 2018 10:43 pm
- Forum: The GAM
- Topic: 190 Montauk New Rear Seats
- Replies: 16
- Views: 10983
Re: 190 Montauk New Rear Seats
Did they redesign the 190 Montauk’s hull or just add features?
I can’t find any information that says they did
I can’t find any information that says they did
- Thu Jul 19, 2018 3:47 pm
- Forum: The GAM
- Topic: 1999 Ventura 20 Advice
- Replies: 9
- Views: 6943
Re: 1999 Ventura 20 Advice
Check the transom thru-hull fittings for leaks.
- Thu Jul 19, 2018 8:31 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2004 DAUNTLESS 220 Leaking Drains
- Replies: 4
- Views: 4923
Re: 2004 DAUNTLESS 220 Leaking Drains
whalerron: I hope you are still on this board. I am going through the same thing with my 2003 Nantucket. A poor design led to rotted wood in my transom and I am devastated. Chuck Bennett recommended getting wood out and filling with polyester resin but I wonder if that is good enough. Did you ever g...
- Mon Jul 16, 2018 3:07 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Through-hull Fitting Repairs c.2004 190 NANTUCKET
- Replies: 46
- Views: 28812
Re: Through-hull Fitting Repairs c.2004 NANTUCKET
Well I spoke with Chuck Bennett today (very nice and helpful) and he suggested that I remove any damaged wood and then fill in with Polyester resin added with microfibers or micro balloons. Will that be better than epoxy resin? I’m not that knowledgeable on these types of products.
- Sun Jul 15, 2018 10:18 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Through-hull Fitting Repairs c.2004 190 NANTUCKET
- Replies: 46
- Views: 28812
Re: Through-hull Fitting Repairs c.2004 NANTUCKET
I have to admit that I am so disappointed and a bit miffed at Boston Whaler. Putting cheap wood in the most important part of the hull and then putting cheap plastic thru hull fittings with NO SEALANT is inexcusable for a top line boat. Will probably coast thousands to repair. Just not right If you ...
- Sun Jul 15, 2018 4:35 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Through-hull Fitting Repairs c.2004 190 NANTUCKET
- Replies: 46
- Views: 28812
Re: Through-hull Fitting Repairs c.2004 NANTUCKET
Thanks Jim. Excellent video. Well I took out most of the thru hulls and guess what I found? Rotten wood around the starboard side motor well thru hull! It goes about an inch and a half around the hole. All others seem fine. The transom seems very strong. I am bummed out and kinda mad but it is what ...
- Sat Jul 14, 2018 11:23 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Through-hull Fitting Repairs c.2004 190 NANTUCKET
- Replies: 46
- Views: 28812
Re: Through-hull Fitting Repairs c.2004 NANTUCKET
I am going to replace both engine splash well and the transom live well thru-hull fittings on my 2003 190 Nantucket.
Are there any special directives on how to [replace these thru-hull fittings] other than what has already stated on this thread?
Also, are these parts easy to remove?
Thanks
Are there any special directives on how to [replace these thru-hull fittings] other than what has already stated on this thread?
Also, are these parts easy to remove?
Thanks
- Fri Jul 13, 2018 2:09 pm
- Forum: The GAM
- Topic: Boat Parade - Fishing for St Judes
- Replies: 4
- Views: 3332
Re: Boat Parade - Fishing for St Judes
Saw some of the trailerable one rumbling down I-10 this week. Mostly towed by new duelie pickups. The vehicles and gas they use add another substantial amount of money needed.
- Thu Jul 05, 2018 1:58 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Through-hull Fitting Repairs c.2004 190 NANTUCKET
- Replies: 46
- Views: 28812
Re: Through-hull Fitting Repairs c.2004 NANTUCKET
I am going to replace the motor well and live well thru hull fittings. What is indeed the correct part number for the live well fitting and what is the cost?
Thanks!
Michael
Thanks!
Michael
- Wed Jul 04, 2018 12:19 pm
- Forum: PERFORMANCE
- Topic: 2004 190 Nantucket Re-power with Evinrude E-TEC G2
- Replies: 73
- Views: 46164
Re: 2004 190 Nantucket Re-power
Great work by the fiberglass and motor mounting folks. Motor looks natural and not too heavy in the stern. White motors look great on Whalers
https://www.amazon.com/clouddrive/share ... z4BpRdcBbZ
https://www.amazon.com/clouddrive/share ... z4BpRdcBbZ
- Thu Jun 14, 2018 10:41 pm
- Forum: PERFORMANCE
- Topic: 2004 190 Nantucket Re-power with Evinrude E-TEC G2
- Replies: 73
- Views: 46164
Re: 2004 190 Nantucket Re-power
Take some pics when installation is complete. Would love to see that set up!
- Thu Jun 14, 2018 10:36 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Gasoline Fumes in Bilge
- Replies: 6
- Views: 4424
Re: Gasoline Fumes in Bilge
It's normal for these types of tanks to emit some odor after a period of non use. My 1999 Dauntless 18 had some and my 2003 190 Nantucket has a little once in a while if sitting on the trailer for a few weeks
- Sun Apr 29, 2018 9:13 pm
- Forum: The GAM
- Topic: Sold my Dauntless 18
- Replies: 10
- Views: 6353
Re: Sold my Dauntless 18
Reading this reassures me not to sell my 18 Dauntless. Now have a 150 Suzuki on it. Only wish is less wind in the face, but a great boat. I think I copied your 'full enclosure' plans when I got mine. I think you had the bright red enclosure posted many years ago. I went with gray. Agree, great boat...
- Sun Apr 22, 2018 11:27 am
- Forum: The GAM
- Topic: 1996 OUTRAGE 24 Ride and Stability
- Replies: 28
- Views: 19473
Re: 1996 OUTRAGE 24 Ride and Stability
jimh wrote:...read my article on Boston Whaler corporate history to get a feeling for the c.1996 era at Boston Whaler.
The Boston Whaler Company
http://continuouswave.com/whaler/refere ... haler.html
...
That is a great read on the history of Boston Whaler.
- Mon Apr 09, 2018 10:00 pm
- Forum: The GAM
- Topic: Sold my Dauntless 18
- Replies: 10
- Views: 6353
Re: Sold my Dauntless 18
Butch: good for you! We are mostly Dauphin Island folks but get over that way once in a while.
I will be in the Nantucket (or Realm--I wish)
I will be in the Nantucket (or Realm--I wish)
- Sun Apr 08, 2018 11:34 pm
- Forum: The GAM
- Topic: Sold my Dauntless 18
- Replies: 10
- Views: 6353
Re: Sold my Dauntless 18
Hoping ill hit the lottery.
- Sat Apr 07, 2018 9:08 pm
- Forum: The GAM
- Topic: Sold my Dauntless 18
- Replies: 10
- Views: 6353
Re: Sold my Dauntless 18
Phil T wrote:Mas--don't fret. I had the same problem. I loved my 1991 Outrage 17, it was perfect.
Found another Outrage 17 last year, a 1992 and will bring her back.
Thanks. I still have my 190 Nantucket but I had the Dauntless “tuned in” perfectly.
- Sat Apr 07, 2018 9:05 pm
- Forum: The GAM
- Topic: Sold my Dauntless 18
- Replies: 10
- Views: 6353
Re: Sold my Dauntless 18
jimh wrote:One cure for that: buy a 380 REALM.
Ha! That would be quite a step up.
- Sat Apr 07, 2018 3:10 pm
- Forum: The GAM
- Topic: Sold my Dauntless 18
- Replies: 10
- Views: 6353
Sold my Dauntless 18
Ow! I’m having seller's remorse. [Sold my 18 DAUNTLESS]. What a great boat.
- Mon Apr 02, 2018 8:03 pm
- Forum: MARKETPLACE
- Topic: WTB Boston Whaler Nantucket / Outrage 190
- Replies: 7
- Views: 5390
Re: WTB Boston Whaler Nantucket / Outrage 190
Here is one with original power.
http://www.boattrader.com/listing/2005- ... -103173565
I bought one last year that was re powered; it was more than this one.
http://www.boattrader.com/listing/2005- ... -103173565
I bought one last year that was re powered; it was more than this one.
- Sun Mar 25, 2018 11:56 pm
- Forum: The GAM
- Topic: Safest Form of Payment
- Replies: 9
- Views: 7206
Re: Safest Form of Payment
Thanks to all. Good insights
- Fri Mar 23, 2018 9:04 am
- Forum: The GAM
- Topic: Safest Form of Payment
- Replies: 9
- Views: 7206
Safest Form of Payment
Have to sell one of my boats. What is the safest form of payment between two individuals so that the seller does not get defrauded?
- Thu Mar 15, 2018 10:06 pm
- Forum: The GAM
- Topic: A Boat for Two adults, Two kids in Miami, $10,000 budget
- Replies: 6
- Views: 5518
- Tue Jan 23, 2018 8:25 am
- Forum: SMALL BOAT ELECTRICAL
- Topic: NMEA Connection Difficulty, Suitability for Do-It-Yourself
- Replies: 5
- Views: 4669
Re: NMEA Connection Difficulty, Suitability for Do-It-Yourself
[Interested in] NMEA-2000 connections.
- Thu Jan 18, 2018 12:15 pm
- Forum: The GAM
- Topic: UNSINKABLE: The New England Patriots
- Replies: 14
- Views: 9874
Re: UNSINKABLE: The New England Patriots
I like to say Boston Whalers are the Alabama Crimson Tide of boats.
- Sat Jan 13, 2018 2:29 pm
- Forum: SMALL BOAT ELECTRICAL
- Topic: NMEA Connection Difficulty, Suitability for Do-It-Yourself
- Replies: 5
- Views: 4669
Re: NMEA Connection Difficulty, Suitability for Do-It-Yourself
Thanks. I have some homework to do.
- Fri Jan 12, 2018 9:13 pm
- Forum: SMALL BOAT ELECTRICAL
- Topic: NMEA Connection Difficulty, Suitability for Do-It-Yourself
- Replies: 5
- Views: 4669
NMEA Connection Difficulty, Suitability for Do-It-Yourself
Is [a NMEA connection] an easy do-it-yourself project?
Is [a NMEA connection] a matter of running cables and plugging in?
Or, is [a NMEA connection] something left for trained service personnel?
Is [a NMEA connection] a matter of running cables and plugging in?
Or, is [a NMEA connection] something left for trained service personnel?
- Sun Jan 07, 2018 12:35 pm
- Forum: The GAM
- Topic: Ship Shape TV Episode
- Replies: 3
- Views: 3839
Re: Boston Whaler restoration episode
There is a way to watch it if you subscribe to his website. You can also search for it on your cable/satellite program guide. It will probably pop up on You Tube soon. I agree with you on his show and what it is about, but he does own multiple Whalers including one just like mine; I find it interest...
- Sat Jan 06, 2018 1:58 pm
- Forum: The GAM
- Topic: Ship Shape TV Episode
- Replies: 3
- Views: 3839
Ship Shape TV Episode
Today’s Ship Shape TV espisode has them totally reworking a 17’ Montauk. The topic was getting rid of the wet foam. They showed the moisture meters pegging out and said the foam was full of water. They showed them cutting out the inner hull and scraping the foam out. (Most of it looked fine to my un...
- Fri Dec 29, 2017 4:05 pm
- Forum: The GAM
- Topic: 1999 Dauntless 18 and 2003 Nantucket hulls
- Replies: 2
- Views: 2742
Re: 1999 Dauntless 18 and 2003 Nantucket hulls
Thanks. I couldn’t get that to work
- Fri Dec 29, 2017 2:43 pm
- Forum: The GAM
- Topic: 1999 Dauntless 18 and 2003 Nantucket hulls
- Replies: 2
- Views: 2742
1999 Dauntless 18 and 2003 Nantucket hulls
Thought I’d share this in case anyone was interested...
https://www.amazon.com/clouddrive/share ... PHlh5gwZwW
https://www.amazon.com/clouddrive/share ... PHlh5gwZwW
- Wed Nov 15, 2017 2:07 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Re-power for our Nantucket 190
- Replies: 8
- Views: 5249
Re: Re-power for our Nantucket 190
I have a Suzuki 140hp on my 2003 Nantucket. It does fine but 150 would do even better. The price, weight and performance of the Mercury would be hard to beat.
- Thu Oct 12, 2017 10:14 am
- Forum: The GAM
- Topic: Advice on SPORT 15 and DAUNTLESS 15
- Replies: 22
- Views: 11537
Re: Classic 15 sport or dauntless 15 - advice please
That's a nice Montauk in the ad. Just keep in mind that it has virtually new power and probably lacks a trailer. Because of the new engine the price is way above the market for a 1994 17 Montauk. I do agree Butch but if one could negotiate a bit off the asking price it would be almost like buying a...
- Wed Oct 11, 2017 11:19 pm
- Forum: The GAM
- Topic: Advice on SPORT 15 and DAUNTLESS 15
- Replies: 22
- Views: 11537
Re: Classic 15 sport or dauntless 15 - advice please
Here is something to go by....
https://pensacola.craigslist.org/boa/d/ ... 28006.html
https://pensacola.craigslist.org/boa/d/ ... 28006.html
- Fri Oct 06, 2017 1:42 pm
- Forum: The GAM
- Topic: 2003 Nantucket
- Replies: 9
- Views: 5509
Re: 2003 Nantucket
I have a 2003 190 Nantucket
- Sun Sep 24, 2017 7:46 pm
- Forum: The GAM
- Topic: What a surprise !
- Replies: 2
- Views: 3159
Re: What a surprise !
Lucky you. I got nothing.
- Thu Sep 21, 2017 9:00 pm
- Forum: The GAM
- Topic: Evinrude E-TEC Legacy Engines Slowing Going Away
- Replies: 6
- Views: 6289
Re: Evinrude E-TEC Legacy Engines Slowing Going Away
I wonder if there was any thought to making the current 150 G2 in just the HO series then developing a four-cylinder engine in the 135 to 150-HP range that would weigh less.
- Tue Sep 12, 2017 8:35 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Boat cover for 2004 Nantucket 190.
- Replies: 6
- Views: 4738
Re: Boat cover for 2004 Nantucket 190.
I recently bought a Budge cover thru Amazon for my Nantucket. Good quality and price. Order a size or two larger to account for the bow rail.
- Mon Sep 11, 2017 5:35 pm
- Forum: The GAM
- Topic: John Greviskis Slams E-TEC
- Replies: 8
- Views: 6918
Re: John Greviskis Slams E-TEC
He could just say "well it's time to repower" instead of slamming a good
company
company
- Sun Sep 10, 2017 2:51 pm
- Forum: The GAM
- Topic: John Greviskis Slams E-TEC
- Replies: 8
- Views: 6918
Re: John Greviskis Slams E-TEC
Well, John has done it again. On his latest show he is replacing his Evinrude E Tec 150hp with a Yamaha because the Evinrude "does not run". This is on his 190 Nantucket. Incredible three of his E Tecs suddenly stopped running.
- Fri Sep 01, 2017 11:19 am
- Forum: The GAM
- Topic: Assessing 2004 190 NANTUCKET
- Replies: 10
- Views: 7333
Re: Assessing 2004 190 NANTUCKET
I just bought a 190 Nantucket. It was re-powered last year. I did look at some boats with the original Mercury Optimax engine, and, if I went that route, I was going to to re-power within a year.
- Tue Aug 29, 2017 8:30 pm
- Forum: The GAM
- Topic: Montauk 210 Thoughts
- Replies: 25
- Views: 18062
Re: Montauk 210 Thoughts
I live in Mobile and have been 20 miles out in the Gulf; to Petit Bois and Ship Islands. This was done in 17-18 foot Whalers. The Montauk 210 will more than meet your needs.
- Sat Aug 26, 2017 1:33 pm
- Forum: The GAM
- Topic: 2005 Nantucket: What about the deal?
- Replies: 38
- Views: 18977
Re: 2005 Nantucket: What about the deal?
Butch said it better than me.
What Florida town did you find this boat?
What Florida town did you find this boat?
- Fri Aug 25, 2017 11:34 pm
- Forum: The GAM
- Topic: 2005 Nantucket: What about the deal?
- Replies: 38
- Views: 18977
Re: 2005 Nantucket: What about the deal?
Bilge is cleaner than mine but geez all that going on under the cowling.
- Fri Aug 25, 2017 11:19 am
- Forum: The GAM
- Topic: Boston Whaler Introduces the 2018 170 MONTAUK
- Replies: 25
- Views: 25207
Re: Boston Whaler Introduces the 2018 170 MONTAUK
How goes the ride of a 2018 170 MONTAUK compare to the 2017 170 Montauk?
- Wed Aug 23, 2017 7:44 pm
- Forum: The GAM
- Topic: Boston Whaler Introduces the 2018 170 MONTAUK
- Replies: 25
- Views: 25207
Re: Boston Whaler Introduces the 2018 170 MONTAUK
I love the looks of the new 2018 170 MONTAUK. It is everything the 170 Dauntless is not, and especially now with an option for 115-HP.
That a 2018 170 MONTAUK only weighs 100-lbs less than my 1999 Dauntless 18 to me is interesting.
Butch: Gonna go for three?
That a 2018 170 MONTAUK only weighs 100-lbs less than my 1999 Dauntless 18 to me is interesting.
Butch: Gonna go for three?
- Wed Aug 23, 2017 8:53 am
- Forum: The GAM
- Topic: Montauk 170 Refresh
- Replies: 22
- Views: 15132
Re: Montauk 170 Refresh
If you go to the Whaler site and 'build your Whaler' you can see pics. Nice upgrade. Looks like it does have a built in tank.
- Mon Aug 21, 2017 4:51 pm
- Forum: SMALL BOAT ELECTRICAL
- Topic: New to Modern Electronics
- Replies: 6
- Views: 4637
Re: New to Modern Electronics
Great information and insights.
Thanks!
Thanks!
- Sat Aug 19, 2017 11:01 am
- Forum: SMALL BOAT ELECTRICAL
- Topic: New to Modern Electronics
- Replies: 6
- Views: 4637
Re: Newbie to modern electronics with a question.....
Butch; Great advice.
Thanks once again!
Thanks once again!