Search found 2602 matches
- Tue May 16, 2023 3:43 pm
- Forum: PERFORMANCE
- Topic: 1964 NAUSET 16 Yamaha F70A
- Replies: 31
- Views: 5186
Re: 1964 NAUSET 16 Yamaha F70A
Dave - Dozens and dozens of 16' model (Nauset, Sakkonet, Eastport et.al) owners have selected the Yamaha F70 as their repower choice. After many rounds of testing, these are the recommended props. Any one of these is a good selection. 13 x 17" Yamaha Painted SS 13-1/4" x 14" Yamaha Pe...
- Thu May 04, 2023 11:37 am
- Forum: The GAM
- Topic: Repowering 2000 Dauntless 18
- Replies: 18
- Views: 8315
Re: Repowering 2000 Dauntless 18
The gear ratio of the Opti is 2.00. The Mercury 150 Fourstroke is 1.92 Is the current propeller a four-bladed stainless propeller? Where are the the new harnesses? I would not reuse the old ones. If you reuse them you will not be able to network the engine with your plotter or MFD in the future. You...
- Wed May 03, 2023 2:05 pm
- Forum: The GAM
- Topic: Repowering 2000 Dauntless 18
- Replies: 18
- Views: 8315
Re: Repowering 2000 Dauntless 18
I would not spend $5,000 on the existing engine. The quote for the new Mercury 150 Fourstoke reads low. Loose engine price typically runs $17,000, rigging is $2,000 including a stainless steel propeller, and installation is $1,500. Then add sales tax. Get a separate detailed quote from another deale...
- Sat Apr 29, 2023 11:30 am
- Forum: The GAM
- Topic: Dealer Installation of Missing Rod Holders
- Replies: 13
- Views: 3773
Re: Dealer Installation of Missing Rod Holders
With the increased demand in recreational boats, Boston Whaler expanded its production facilities and increased hiring 16-24 months ago. It has long been known the quality of newly produced boats would suffer until the experience level of production staff increased and production levels matched the ...
- Fri Apr 28, 2023 3:16 pm
- Forum: The GAM
- Topic: Norman Pin Hole Diamter
- Replies: 2
- Views: 2052
Re: Norman Pin Hole Diamter
[To get good advice on the diameter of an OEM Norman Pin] check with the parts department of NAUSET MARINE, a Boston Whaler dealer that sells OEM products. This is their offering: https://www.nausetmarine.com/boston-whaler-parts/hardware/tow-hardware/1035260-norman-pin/ If the existing hole istoo la...
- Fri Apr 28, 2023 12:10 pm
- Forum: The GAM
- Topic: Decision to Restore or Leave As-Is for 1969 13-footer
- Replies: 4
- Views: 2287
Re: Decision to Restore or Leave As-Is for 1969 13-footer
Before you go one step further on painting, DETAIL the boat.
If you don't have shiny gelcoat, you have oxidation. A detail will remove oxidation. Once you have detailed the boat, then consider what to do or not to do.
Watch this:
https://www.youtube.com/watch?v=IAjvMb309BI
If you don't have shiny gelcoat, you have oxidation. A detail will remove oxidation. Once you have detailed the boat, then consider what to do or not to do.
Watch this:
https://www.youtube.com/watch?v=IAjvMb309BI
- Wed Apr 26, 2023 5:40 pm
- Forum: The GAM
- Topic: Source for 8-foot Long Bimini Top
- Replies: 3
- Views: 2185
Re: Source for 8-foot Long Bimini Top
Carver branded bimini's come in 8' lengths. Just add your height and width.
Offered by resellers. Here is one that many owners use:
https://www.boatcoversdirect.com/products/bimini_tops/by_dimensions/
Offered by resellers. Here is one that many owners use:
https://www.boatcoversdirect.com/products/bimini_tops/by_dimensions/
- Tue Apr 25, 2023 4:53 pm
- Forum: The GAM
- Topic: Dealer Installation of Missing Rod Holders
- Replies: 13
- Views: 3773
Re: Dealer Installation of Missing Rod Holders
Make sure the dealer uses the factory provided installation instructions (ask for a copy for your records) from Engineering . You want prevent them getting some yard nitwit cutting into your boat. Have the dealer document the added installed accessory was dealer installed and included in the factory...
- Tue Apr 25, 2023 4:49 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: MONTAUK 17 Bimini Top Length
- Replies: 7
- Views: 2498
Re: MONTAUK 17 Bimini Top Length
A second Bimini top could be bought and the two tops attached with a zipper.
- Sun Apr 23, 2023 5:01 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2004 NANTUCKET Combined Sidelights Lamp Part Numbers
- Replies: 8
- Views: 1049
Re: 2004 NANTUCKET Combined Sidelights Lamp Part Numbers
Nauset's Parts Department is very good and supports owners around the world.
They have a dedicated email address and Jason, Justin and Derek are great to work with.
They have a dedicated email address and Jason, Justin and Derek are great to work with.
- Sun Apr 23, 2023 4:55 pm
- Forum: SMALL BOAT ELECTRICAL
- Topic: Loss of Electrical Power to Engine
- Replies: 3
- Views: 2652
Re: Loss of Electrical Power to Engine
Is the wheel turned to one side? Move to pointing straightahead. There was a problem of a pinching of the harnesses at full lock. Attempt start. Remove and check the fuses under the cowl of the engine. Replace them. Do you have a main battery switch? Rotate on/off several times. Check the main reset...
- Fri Apr 21, 2023 12:29 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2004 NANTUCKET Combined Sidelights Lamp Part Numbers
- Replies: 8
- Views: 1049
Re: 2004 NANTUCKET Combined Sidelights Lamp Part Numbers
My go-to is Nauset Marine, http://www.nausetmarine.com
Email their Parts Department directly at parts@nausetmarine.com
Email their Parts Department directly at parts@nausetmarine.com
- Sun Apr 16, 2023 12:26 pm
- Forum: PERFORMANCE
- Topic: 1987 MONTAUK 17 SUZUKI DF60a
- Replies: 7
- Views: 3233
Re: 1987 MONTAUK 17 DF601987 MONTAUK 17 SUZUKI DF60a
I would consider going up in pitch in the same model prop to see if you can pick up a bit of speed. A 15" or 16" will still keep you in the recommended WOT range. Can you find a seller that will allow returns? We prop the engine not for top speed rather for efficient operation at all speeds.
- Sat Apr 15, 2023 11:12 am
- Forum: PERFORMANCE
- Topic: SPORT 15 with Suzuki DF60a Performance Data
- Replies: 12
- Views: 3396
Re: SPORT 15 with Suzuki DF60a Performance Data
Please add-
Engine mounting height. How many empty holes above the top bolt?
Prop manufacturer, model and size. i.e. PowerTech SCD3 13x17.
Speed and rpm when initially on plane.
Speed at each 1000 rpm
Top speed and rpm at full throttle (WOT)
Engine mounting height. How many empty holes above the top bolt?
Prop manufacturer, model and size. i.e. PowerTech SCD3 13x17.
Speed and rpm when initially on plane.
Speed at each 1000 rpm
Top speed and rpm at full throttle (WOT)
- Thu Apr 13, 2023 8:51 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2008 205 CONQUEST Source for New Weather Canvas
- Replies: 4
- Views: 748
Re: 2008 205 CONQUEST Source for New Weather Canvas
Another instance of the geniuses at Whaler marketing showing off their scattershot naming convolutions.
Yes; the 205 Eastport was renamed the 205 Conquest.
Just like the 190 Nantucket was renamed the 190 Outrage
Same boat, different name.
Yes; the 205 Eastport was renamed the 205 Conquest.
Just like the 190 Nantucket was renamed the 190 Outrage
Same boat, different name.
- Thu Apr 13, 2023 5:02 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2008 205 CONQUEST Source for New Weather Canvas
- Replies: 4
- Views: 748
Re: 2008 205 CONQUEST Source for New Weather Canvas
I recall it was Great Lakes Boat Top https://greatlakesboattop.com/boston-whaler If you have the old one, you can replace it with a Carver. They make high quality products. Measure your height, width. They are sold via resellers. https://www.boatcoversdirect.com/products/bimini_tops/by_dimensions/
- Sun Apr 09, 2023 5:58 pm
- Forum: PERFORMANCE
- Topic: Compensating for Added Engine Weight
- Replies: 4
- Views: 2367
Re: Weight 4 stroke v. 2 stroke
You are correct. Moving the battery to the center console (cut the shelf so it rests on the deck) will ofset the added weight in the stern.
The boat can handle the added weight.
The boat can handle the added weight.
- Fri Apr 07, 2023 7:19 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Dauntless 15 Console Access
- Replies: 2
- Views: 714
- Wed Apr 05, 2023 1:49 pm
- Forum: The GAM
- Topic: 2000 Dauntless center console- Need straps for cooler seat
- Replies: 5
- Views: 2585
Re: 2000 Dauntless center console- Need straps for cooler seat
Unscrew the cleats on the deck and replace the bungie cord. Sold by the foot in a local hardward store. C hook to the hole in the center of the handle base.
Seal the cleat screw holes on reassembly with Boat Life and not adhesive.
Seal the cleat screw holes on reassembly with Boat Life and not adhesive.
- Mon Apr 03, 2023 2:12 pm
- Forum: The GAM
- Topic: Generic Trailerable Cover for Katama 16
- Replies: 10
- Views: 3146
Re: Generic Trailerable Cover for Katama 16
There are covers and there are trailerable covers. Trailerable covers need to fit well and are tight with straps to keep it in place. Areas in contact with the console, rails need to be reinforced. Even with 6-8 hour drives, I do not use a cover. Just a headache. I do recommend Carver and Westland. ...
- Mon Apr 03, 2023 9:53 am
- Forum: MARKETPLACE
- Topic: Appraisal: 1993 GUARDIAN 19
- Replies: 2
- Views: 2307
Re: Appraisal and identification
Do you want the insurance to replace the boat or actual cash value (acv)?
Based on a single photo - $10,000
Based on a single photo - $10,000
- Sat Apr 01, 2023 5:07 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Teleflex NFB Hard Steering
- Replies: 2
- Views: 652
Re: newtauk with etec 90 hard to steer
The engine should be mounted 2 or 3 holes up with the blind holes filled and the lower holes drilled.
- Fri Mar 31, 2023 3:21 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2014 170 MONTAUK: Fuel Hose Route with 22-gallon Tank
- Replies: 19
- Views: 3158
Re: 2014 170 MONTAUK: Fuel Hose Route with 22-gallon Tank
The vent is in the cap.
No to installing a fuel demand valve. Not required. They cause nothing but trouble. You don't need this.
Sorry to be the naysayer but I don't like the tank not fully supported. This design could lead to a structural failure down the road.
No to installing a fuel demand valve. Not required. They cause nothing but trouble. You don't need this.
Sorry to be the naysayer but I don't like the tank not fully supported. This design could lead to a structural failure down the road.
- Fri Mar 31, 2023 3:15 pm
- Forum: SMALL BOAT ELECTRICAL
- Topic: NMEA 2000 and Yamaha or Suzuki Engines
- Replies: 4
- Views: 4451
Re: NMEA 2000 and Yamaha or Suzuki Engines
Many owners are only installing a single multifunction gauge and utilizing a large, 7-inch or bigger multifunction dislpay (MFD). A chart plotter is one type of a MFD. One way to help make the decision on which brand is to visit each brand's local dealer and have the parts team explain how to integr...
- Thu Mar 30, 2023 7:52 pm
- Forum: The GAM
- Topic: 190 MONTAUK Re-power SUZUKI 140BG
- Replies: 8
- Views: 2792
Re: 190 MONTAUK Re-power SUZUKI 140BG
Make sure the dealer installs the engine with the top bolt in the third hole down from the top.
A 14x20 Suzuki stainless steel propeller would be a good one to start testing with.
A 14x20 Suzuki stainless steel propeller would be a good one to start testing with.
- Thu Mar 30, 2023 7:49 pm
- Forum: The GAM
- Topic: Repowering 2000 Dauntless 18
- Replies: 18
- Views: 8315
Re: Repowering 2000 180 Dauntless
I would not recommend a 115-HP four-stroke-power-cycle engine for [a 2000 180 DAUNTLESS]. The DF140 would be the most cost effective. A good four-bladed propeller and proper engine installation at two-holes up or three-holes-up will solve [the tendency for the bow to ride high] you are concerned abo...
- Wed Mar 29, 2023 2:53 pm
- Forum: The GAM
- Topic: Repowering 2000 Dauntless 18
- Replies: 18
- Views: 8315
Re: Repowering 2000 180 Dauntless
ENGINE WEIGHTS: Mercury 150 (455 lbs), Yamaha F150 (522 lbs) or Suzuki DF140 (419 lbs) with a quality three-bladed or four-bladed stainless steel propeller. Calculate the weight difference with what you have now. Place that weight in the splashwell or stern to simulate the "New" weight. If...
- Tue Mar 28, 2023 9:42 am
- Forum: The GAM
- Topic: Sources for Leaning Post for 1997 OUTRAGE 20
- Replies: 6
- Views: 2989
Re: Sources for Leaning Post for 1997 OUTRAGE 20
Adjustable leaning posts are ones that have legs with the ability to raise and lower the pad.
One example:
One example:
- Mon Mar 27, 2023 9:13 pm
- Forum: The GAM
- Topic: Sources for Leaning Post for 1997 OUTRAGE 20
- Replies: 6
- Views: 2989
Re: Sources for Leaning Post for 1997 OUTRAGE 20
While the original leaning post is not available, take a look at Todd's offerings.
https://www.toddusa.com/leaning-posts.aspx
If you really want close to original, contact Ray Martin @ http://www.MartinMarineDesign.com. Ray can fabricate one that is very close.
https://www.toddusa.com/leaning-posts.aspx
If you really want close to original, contact Ray Martin @ http://www.MartinMarineDesign.com. Ray can fabricate one that is very close.
- Mon Mar 27, 2023 8:27 pm
- Forum: PERFORMANCE
- Topic: 1987 MONTAUK 17 SUZUKI DF60a
- Replies: 7
- Views: 3233
Re: 1987 MONTAUK 17 SUZUKI DF60a
In the end you will want to switch to a stainless steel propeller. They are more efficient, and with the limited horsepower, you'll need all the efficiency you can get.
Try starting with a 11-3/4 x 14 Suzuki stainless steel propeller.
Try starting with a 11-3/4 x 14 Suzuki stainless steel propeller.
- Sun Mar 26, 2023 3:04 pm
- Forum: PERFORMANCE
- Topic: 2001 DAUNTLESS 16 Suzuki DF140BG: will report on performance in future post
- Replies: 6
- Views: 2631
Re: 2001 DAUNTLESS 16 with Suzuki DF140BG will report on performance in future post
For a 2001 DAUNTLESS 16 the maximum rated power is 115-HP, and the transom weight maximum is 455-lbs
- Sat Mar 25, 2023 8:16 pm
- Forum: PERFORMANCE
- Topic: 2001 DAUNTLESS 16 Suzuki DF140BG: will report on performance in future post
- Replies: 6
- Views: 2631
Re: 2001 DAUNTLESS 16 with Suzuki DF140BG
Ensure the tech installs the engine at least two-holes up, that is, top bolt in the third hole down from the top. While not exact, I would start with a 14x20 3-blade Suzuki stainless propeller, and put consider a 14x18 four-bladed version to help in low speed planing and reducing bow rise on acceler...
- Sat Mar 25, 2023 12:17 pm
- Forum: The GAM
- Topic: Registering a 1964 NAUSET in Florida
- Replies: 4
- Views: 2261
Re: Registering a 1964 NAUSET in Florida
It is not a concern.
- Thu Mar 23, 2023 6:24 pm
- Forum: MARKETPLACE
- Topic: Appraisal: 2017 Montauk 170
- Replies: 2
- Views: 2238
Re: Appraisal: 2017 Montauk 170
[A 2017 170 MONTAUK should sell at a price in the] $30,000 to mid-$30,000 range. August is not necessarily the best time to sell. Below are links to comparable boats; https://www.boattrader.com/boat/2015-boston-whaler-170-montauk-8701208/ https://www.boattrader.com/boat/2017-boston-whaler-170-montau...
- Thu Mar 23, 2023 8:34 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Graphic Size for a 17 Montauk
- Replies: 2
- Views: 626
Re: Graphic Size for a 17 Montauk
The Montauk was not introduced until 1973.
If you have a wooden center console, it could be a Nauset, Sakonnet or other 16' model.
There is one source for OEM decals.
http://www.MagicBrushSigns.com
Give Janis a call and she'll get you the appropriate decals for your model.
If you have a wooden center console, it could be a Nauset, Sakonnet or other 16' model.
There is one source for OEM decals.
http://www.MagicBrushSigns.com
Give Janis a call and she'll get you the appropriate decals for your model.
- Tue Mar 21, 2023 5:18 pm
- Forum: VHF MARINE RADIO
- Topic: Best VHF Marine Band Radio Antenna
- Replies: 6
- Views: 1904
Re: Best VHF Marine Band Radio Antenna
Padre - It could be "Shipping" or "Shipping (including "handling").
Freight charges have been under pressure due to higher costs. Diesel is still $1 to $3 a gallon more since whenever it went into stupid expensive territory.
Freight charges have been under pressure due to higher costs. Diesel is still $1 to $3 a gallon more since whenever it went into stupid expensive territory.
- Sat Mar 18, 2023 8:13 pm
- Forum: The GAM
- Topic: 150 Montauk: Optional Stern Seat
- Replies: 3
- Views: 2642
Re: 150 Montauk: Optional Stern Seat
There was no optional seat offered for the Montauk 150.
The Montauk was redesigned in 2018. Any option based on the prior version is no longer in production.
The Montauk was redesigned in 2018. Any option based on the prior version is no longer in production.
- Wed Mar 15, 2023 7:26 pm
- Forum: VHF MARINE RADIO
- Topic: Best VHF Marine Band Radio Antenna
- Replies: 6
- Views: 1904
Re: VHF Marine Band Radio Antenna Recommendation
Not sure what makes [the MORAD VHF-156HD antenna the] "best". Maybe it's price. Compare the Morad 6 dB gain at $266 https://www.morad.com/products/vhf-antenna-156-hot-rod versus Shakespeare 8-foot 6 dB gain antenna. Even at West Marine it's overpriced at $89.99 https://www.westmarine.com/s...
- Wed Mar 15, 2023 12:05 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2007 150 MONTAUK Wire Chase Location Between Bow and Console
- Replies: 6
- Views: 987
Re: 2007 150 MONTAUK Wire Chase Location Between Bow and Console
There are dozens of owners using the extension cord without a concern. Just include enough length to route the cable in a way it is flat on the deck. Q3: how can the electrical wiring to the combined sidelight navigation lamp at the bow be replaced? [The wiring for the combined sidelight navigation ...
- Wed Mar 15, 2023 11:59 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Hull Damage Removing Gel Coat Layer
- Replies: 8
- Views: 1094
Re: Hull Damage Removing Gel Coat Layer
I would not leave the boat in the water for an extended period of time with just the temporary repairs
Marine Tex is designed for under-water repairs. The advice above is not accurate. Review the product information.
- Mon Mar 13, 2023 6:59 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Hull Damage Removing Gel Coat Layer
- Replies: 8
- Views: 1094
Re: Hull Damage Removing Gel Coat Layer
After reviewing the photos, my advice stands. You can use Marine Tex for these. Once the repair facility is available, the technican will grind off the repair and apply gelcoat. In the meantime, you can use the boat without concern. Sand the damaged area with 100 grit sandpaper. Wipe off with a rag ...
- Mon Mar 13, 2023 12:48 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Hull Damage Removing Gel Coat Layer
- Replies: 8
- Views: 1094
Re: Hull Damage Removing Gel Coat Layer
Uploading a few photos will help give precise advice. Above the waterline - Apply a layer of clear packing tape over the damage with the ends folded over (to aid in removal). Go use the boat. At or below the waterline - Lightly sand damaged area, apply Marine Tex to the area. Let cure. Launch the bo...
- Tue Mar 07, 2023 2:56 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2007 150 MONTAUK Wire Chase Location Between Bow and Console
- Replies: 6
- Views: 987
Re: 2007 150 MONTAUK Wire Chase Location Between Bow and Console
Greg - It is important to understand there isn't any void in the inner hull. The entire space if filled with foam. The only rigging tube or chase is from the console to the stern. See https://www.bostonwhaler.com/content/dam/boston-whaler/technical/resources/150-Montauk-Hull-Outfit-Assembly-and-Equi...
- Sun Mar 05, 2023 8:15 pm
- Forum: The GAM
- Topic: Best Place to Sell Used Outboard Engines
- Replies: 4
- Views: 3272
Re: Best Place to Sell Used Outboard Engines
Facebook Marketplace above the others.
- Fri Mar 03, 2023 1:54 pm
- Forum: The GAM
- Topic: Source for Reproduction of Capacity Plate for SUPER SPORT 11
- Replies: 3
- Views: 2077
Re: Source for Reproduction of Capacity Plate for SUPER SPORT 11
The OEM vendor for graphics and decals is Magic Brush Signs.
http://www.magicbrushsigns.com
They also offer:
Capacity plate reproduction as a sticker. A metal backing plate is also an option.
Matching registration numbers
Boat Name graphics.
Give them a call.
http://www.magicbrushsigns.com
They also offer:
Capacity plate reproduction as a sticker. A metal backing plate is also an option.
Matching registration numbers
Boat Name graphics.
Give them a call.
- Wed Mar 01, 2023 8:04 pm
- Forum: The GAM
- Topic: Identify Model and Year of Construction of a Boat Believed to be a Boston Whaler
- Replies: 12
- Views: 3360
Re: Identify Model and Year of Construction of a Boat Believed to be a Boston Whaler
Please post a photo.
Many times there are boats labeled as Boston Whaler that are not.
Grazie Dino.
Many times there are boats labeled as Boston Whaler that are not.
Grazie Dino.
- Wed Mar 01, 2023 10:10 am
- Forum: PERFORMANCE
- Topic: 150 MONTAUK Yamaha F70
- Replies: 3
- Views: 2421
Re: 150 MONTAUK Yamaha F70
All of the propellers I listed are three-bladed. The blade design differences explain the disparity in the pitch size.
- Mon Feb 27, 2023 3:16 pm
- Forum: PERFORMANCE
- Topic: 150 MONTAUK Yamaha F70
- Replies: 3
- Views: 2421
Re: 150 MONTAUK Yamaha F70
The first generation 150 MONTAUK (up to 2016) has the same weight as the Montauk 17 at 950-lbs. For this reason I would suggest the following propellers for the F70 to start: ⋅ 13 x 17 Yamaha Painted SS ⋅ 13.25 x 14 Yamaha Performance Series ⋅ 13-1/4 x 17 Turbo 1 ⋅...
- Wed Feb 22, 2023 1:46 pm
- Forum: The GAM
- Topic: A Boat For Large New England Lakes
- Replies: 7
- Views: 2556
Re: A Boat For Large New England Lakes
I should add I recommended this model since it was present for the Lake Winnipesaukee Whaler Gathering I organized in 2004.
George and Kristina loved the boat and it was easy to see why. It was a great day.
George and Kristina loved the boat and it was easy to see why. It was a great day.
- Wed Feb 22, 2023 11:54 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Mercury 40-HP: Remedy for very stiff steering
- Replies: 10
- Views: 2943
Re: Mercury 40-HP: Remedy for very stiff steering
The OP states the problem is steering. It is the mechanic who recommends a repair that involves the pivot (side-to-side) tube. The OP lists steps gleened from searching the internet. I recommend the owner disconnect the steering arm nut (see figure 1) and move the engine manually to verify the sourc...