Search found 202 matches

by InVision
Thu Nov 02, 2017 5:01 am
Forum: REPAIRS and MODIFICATIONS
Topic: Hierarchy of Engine Instrumentation
Replies: 7
Views: 4679

Re: Hierarchy of Engine Instrumentation

I respectfully disagree about engine temp gauge. Here, in salt water conditions, water passages in the engine can get clogged. A temperature gauge is useful if pressure is normal but the engine runs hotter than normal.
by InVision
Tue Oct 31, 2017 11:01 am
Forum: REPAIRS and MODIFICATIONS
Topic: Tachometer Placement
Replies: 8
Views: 5226

Re: Tachometer Placement

[REPLY TO NEW TOPIC--please post your remarks to the new topic in a new thread on that topic. See

viewtopic.php?f=6&t=2827

--jimh]
by InVision
Mon Oct 30, 2017 9:14 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Tachometer Placement
Replies: 8
Views: 5226

Re: Tachometer Placement

[CHANGED THE SUBJECT--please repost your remarks on the new subject in a new thread on that topic. See

viewtopic.php?f=6&t=2827

--jimh]
by InVision
Tue Oct 24, 2017 8:13 am
Forum: REPAIRS and MODIFICATIONS
Topic: Through-hull Fitting Repairs c.2004 190 NANTUCKET
Replies: 46
Views: 28599

Re: Through-hull Fitting Repairs c.2004 NANTUCKET

For the Record - I am very grateful that vze2gbs4 pointed out that I should inspect the thru-hulls. Boat US had a write up last month about inspecting and showed a photo that looked exactly like what I found on our 190 Nantucket. Interesting fact in article was that the concern is usually caused by ...
by InVision
Sat Oct 21, 2017 11:28 am
Forum: REPAIRS and MODIFICATIONS
Topic: 1996 Evinrude 70 hp: Alarm Horn
Replies: 50
Views: 24298

Re: 1996 Evinrude 70 hp: Alarm Horn

I just want to note that Jim's posts of plug illustration is invaluable !!

Wealth of info.


M
by InVision
Sat Oct 21, 2017 6:29 am
Forum: REPAIRS and MODIFICATIONS
Topic: 1996 Evinrude 70 hp: Alarm Horn
Replies: 50
Views: 24298

Re: 1996 Evinrude 70 hp: Alarm Horn

Similarly, on our 190 Nantucket we would get a warning of four-BEEPS every two minutes from the Mercury OPTI 150. I had to replace the engine oil tank because the magnetic float broke in the sealed tank. DISCUS' should be very concerned about the red [Amphenol multi-pole] plug. If a wire in the plug...
by InVision
Fri Oct 20, 2017 1:40 pm
Forum: REPAIRS and MODIFICATIONS
Topic: 1996 Evinrude 70 hp: Alarm Horn
Replies: 50
Views: 24298

Re: 1996 Evinrude 70 hp: Alarm Horn

I do not have one of these motors so I may ask a stupid question...

Curious about the plug in general. Could you not put solder connectors on each of the wires and heat shrink them. What does the plug buy you besides misery?

M
by InVision
Fri Oct 20, 2017 12:14 pm
Forum: REPAIRS and MODIFICATIONS
Topic: 1996 Evinrude 70 hp: Alarm Horn
Replies: 50
Views: 24298

Re: 1996 Evinrude 70 hp: Alarm Horn

IMHO I would replace the connector. Then I would apply corrosion-X to both sides before connecting.

M
by InVision
Thu Oct 19, 2017 9:07 pm
Forum: REPAIRS and MODIFICATIONS
Topic: 1996 Evinrude 70 hp: Alarm Horn
Replies: 50
Views: 24298

Re: 1996 Evinrude 70 hp: Alarm Horn

I would bypass the oil and temp sensors and see if alarm goes away after you clean the "Red Plug". Downloading a service manual with flow charts on troubleshooting would also help. I found a bad sensor in oil tank on our Mercury OPTI 150 by purchasing a service manual off of eBay. Good Luc...
by InVision
Thu Oct 19, 2017 6:52 pm
Forum: REPAIRS and MODIFICATIONS
Topic: 1996 Evinrude 70 hp: Alarm Horn
Replies: 50
Views: 24298

Re: 1996 Evinrude 70 hp: Alarm Horn

If you just turn on the key and not start engine does the alarm sound?

IMHO I would check the oil sensor and the engine temp sensor.

M
by InVision
Wed Oct 18, 2017 8:43 am
Forum: REPAIRS and MODIFICATIONS
Topic: Bow Rail Rod Holders
Replies: 6
Views: 5051

Bow Rail Rod Holders

I am sure most members have notice that one thing that seemed to be missing on the 190 Nantucket was bow rod holders. I wanted to add a couple and found these on Amazon for $42 a pair. Was very surprised how high quality they were for that price. Install in minutes. Added some Locktite to screws to ...
by InVision
Wed Oct 18, 2017 4:51 am
Forum: REPAIRS and MODIFICATIONS
Topic: Trim Tabs for 190 Nantucket-Outrage
Replies: 28
Views: 15252

Re: Trim Tabs for 190 Nantucket-Outrage

'VISION--what aspect of the boat's performance after a few outings led you to conclude that the hull needed trim tabs? Do you think the hull needs trim tabs to get on plane better? Do you think the hull needs trim tabs to even out the lateral trim? Jim - Mostly operation in shallow waters which we ...
by InVision
Tue Oct 17, 2017 11:50 am
Forum: The GAM
Topic: 2013 Dauntless 170 Fuel Tank
Replies: 9
Views: 6642

Re: 2013 Dauntless 170 Fuel Tank

For reference, a 2004 Nantucket has a molded polyethylene fuel tank.
by InVision
Tue Oct 17, 2017 10:23 am
Forum: The GAM
Topic: 2013 Dauntless 170 Fuel Tank
Replies: 9
Views: 6642

Re: 2013 Dauntless 170 Fuel Tank

Our 190 Nantucket [fuel tank] is something--not metal. I believe [the fuel tank] is molded polyethylene.

M
by InVision
Mon Oct 16, 2017 3:07 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Trim Tabs for 190 Nantucket-Outrage
Replies: 28
Views: 15252

Re: Trim Tabs for 190 Nantucket-Outrage

I like that installation. Being toward the outside it seems you have better adjustments. If only it was not drilling holes which I hate. May consider having it done at the service shop. Can anyone talk to how much effort is involved in a DIY?

M
by InVision
Mon Oct 16, 2017 9:44 am
Forum: REPAIRS and MODIFICATIONS
Topic: Trim Tabs for 190 Nantucket-Outrage
Replies: 28
Views: 15252

Re: Trim Tabs for 190 Nantucket-Outrage

I did and I fixed it thanks Jim !!

M
by InVision
Mon Oct 16, 2017 8:48 am
Forum: REPAIRS and MODIFICATIONS
Topic: Trim Tabs for 190 Nantucket-Outrage
Replies: 28
Views: 15252

Trim Tabs for 190 Nantucket-Outrage

Based on a few outings in our newly acquired use 190 Nantucket with Mercury 150-HP OptiMax, I think trim tabs might be very helpful. [Wants to see] photos of trim tabs installed on a 190 Nantucket or 190 Outrage. I have read the article by Jim on Seymour's install of electric trim tabs. Not sure I l...
by InVision
Fri Oct 13, 2017 1:40 pm
Forum: The GAM
Topic: Replacement Decals for Mercury Smartcraft
Replies: 3
Views: 3089

Replacement Decals for Mercury Smartcraft

Where can I get a replacement sticker [that says "Smartcraft"] for my console?
by InVision
Fri Oct 13, 2017 12:05 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Through-hull Fitting Repairs c.2004 190 NANTUCKET
Replies: 46
Views: 28599

Re: Through-hull Fitting Repairs c.2004 NANTUCKET

I can't see tighten all that tight with plastic thru-hulls. Made a 3" long aluminum tube with grip on outside to fit plastic nuts. Going to hand tighten then let cure for 24 hours and follow up with tightening with aluminum tube tool I made. Made an aluminum lobster measure stick into a tool to...
by InVision
Fri Oct 13, 2017 6:18 am
Forum: REPAIRS and MODIFICATIONS
Topic: Boat cover for 2004 Nantucket 190.
Replies: 6
Views: 4722

Re: Boat cover for 2004 Nantucket 190.

Don't really need the shock cords in normal weather. I put them together for winter storage or wind storms. The side shock cords are very easy with the help of a boat hook. The front shock cord is rigged with the help of the loose board seen laying in the front of dock. It lays at a diagonal from si...
by InVision
Thu Oct 12, 2017 9:35 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Boat cover for 2004 Nantucket 190.
Replies: 6
Views: 4722

Re: Boat cover for 2004 Nantucket 190.

Well got our cover today. We like it !!

M

IMG_7650.JPG
IMG_7650.JPG (109.28 KiB) Viewed 4605 times


IMG_7651.JPG
IMG_7651.JPG (95.42 KiB) Viewed 4605 times
by InVision
Thu Oct 12, 2017 9:49 am
Forum: The GAM
Topic: Advice on SPORT 15 and DAUNTLESS 15
Replies: 22
Views: 11455

Re: Classic 15 sport or dauntless 15 - advice please

Curious where in the US are you? My Neighbor has a 2012 Sport for sale. Very clean boat no bottom paint. We are in Destin FL area.

M
by InVision
Wed Oct 11, 2017 9:34 am
Forum: REPAIRS and MODIFICATIONS
Topic: Through-hull Fitting Repairs c.2004 190 NANTUCKET
Replies: 46
Views: 28599

Re: Through-hull Fitting

It is a funny thing. One whaler dealer gave me different part numbers, but the latest dealer said both are the same the new Thru-Hull part number is 1772845. Since VZE2GBS4 used the same for both I suspect that is correct.

M

thru-hull.jpg
thru-hull.jpg (106.13 KiB) Viewed 28424 times
by InVision
Wed Oct 11, 2017 7:08 am
Forum: REPAIRS and MODIFICATIONS
Topic: Through-hull Fitting Repairs c.2004 190 NANTUCKET
Replies: 46
Views: 28599

Re: Through-hull Fitting

Yes Sir, installing OEM ones. Going to kick the can down the road again I guess you would say. These lasted 14 years so I am good with that they are less than $40 for both. Also all the press fit thru-hull are white and they are in excellent shape so I want them to match. Finding the correct bronze ...
by InVision
Tue Oct 10, 2017 4:23 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Through-hull Fitting Repairs c.2004 190 NANTUCKET
Replies: 46
Views: 28599

Re: Through-hull Fitting

I found the Boston Whaler new numbers for the two bad thru-hull fittings. All fittings were good except the Livewell and the starboard deck fitting. Interestingly they are the only two with [threaded retainer] nuts. All others are press fit. 1772845 [Updated part number] The fittings are $18 or so e...
by InVision
Tue Oct 10, 2017 10:40 am
Forum: REPAIRS and MODIFICATIONS
Topic: Through-hull Fitting Repairs c.2004 190 NANTUCKET
Replies: 46
Views: 28599

Re: Through-hull Fitting

I have two bad thru-hull fittings on our 2004 Nantucket 190 under the swim platform. Best I can tell they are Boston Whaler part numbers 0996538 and 0996546. I would like to find original parts. I have absolutely no luck. I have to look at after-market I guess. Not sure where to start. Kind of weird...
by InVision
Sat Oct 07, 2017 12:21 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Through-hull Fitting Repairs c.2004 190 NANTUCKET
Replies: 46
Views: 28599

Re: Through-hull Fitting

Good info. Will check our boat. What brand and part number work?
[Requests a photograph]
by InVision
Sat Oct 07, 2017 9:31 am
Forum: The GAM
Topic: 2003 Nantucket
Replies: 9
Views: 5500

Re: 2003 Nantucket

All good info. Two and half years of Nantucket 190. What was the production was during that time?
by InVision
Fri Oct 06, 2017 1:50 pm
Forum: The GAM
Topic: 2003 Nantucket
Replies: 9
Views: 5500

Re: NADA

NADA has most models correct that I have seen.
by InVision
Fri Oct 06, 2017 1:46 pm
Forum: The GAM
Topic: 2003 Nantucket
Replies: 9
Views: 5500

Re: 2003 Nantucket

That helps. So [the Nantucket 190] was produced from 2003 to 2005. NADA says no to 2003 Nantucket. I found a listing for sale.
by InVision
Fri Oct 06, 2017 8:59 am
Forum: The GAM
Topic: 2003 Nantucket
Replies: 9
Views: 5500

2003 Nantucket

I saw an advertisement for a 2003 Nantucket. I guess I never knew there was such a model. I thought Nantucket was only 2004 and 2005, and in the 190 model only.
by InVision
Wed Oct 04, 2017 7:21 am
Forum: REPAIRS and MODIFICATIONS
Topic: Boat cover for 2004 Nantucket 190.
Replies: 6
Views: 4722

Re: Boat cover for 2004 Nantucket 190.

Well I decided to go with the folks that have custom made our covers in the past. I did not like any of the less expensive covers that I looked at. The canvas shop borrowed a Nantucket 190 like ours and fitted a pattern to it. Had them install a port side zipper for access when boat is on the lift. ...
by InVision
Mon Oct 02, 2017 5:19 pm
Forum: VHF MARINE RADIO
Topic: Reset of MMSI for DSC Radio by End User
Replies: 21
Views: 55251

Re: Reset of MMSI for DSC Radio by End User

The procedure worked even better than I though because it actually clears all MMSI info from radio. Very convenient if you were to sell radio used.

M
by InVision
Mon Oct 02, 2017 1:22 pm
Forum: VHF MARINE RADIO
Topic: Reset of MMSI for DSC Radio by End User
Replies: 21
Views: 55251

Re: Reset of MMSI for DSC Radio by End User

Horizon sent me the reset code by email today and and radio is now set for my current boat MMSI. All works as it should as far as I can tell. Great info, Jim!

M
by InVision
Sun Oct 01, 2017 4:02 pm
Forum: The GAM
Topic: "Unsinkable" + Book Signings
Replies: 9
Views: 6572

Re: "Unsinkable" + Book Signings

Sir,

I am almost through reading your fantastic book for a second time. Great work !

I do have a question for you. If there is an error do you want to know? Are there plans for revisions?

Thanks again,

M
by InVision
Sat Sep 30, 2017 10:53 am
Forum: VHF MARINE RADIO
Topic: Reset of MMSI for DSC Radio by End User
Replies: 21
Views: 55251

Re: Reset of MMSI for DSC Radio by End User

I got this response from Standard Horizon: Hi M: Glad you got the software working. The software you have is designed specifically for end users. The software necessary to remove the mmsi is only provided to dealers. You can contact your dealer to see if they are willing to part with it or provide t...
by InVision
Fri Sep 29, 2017 8:00 am
Forum: VHF MARINE RADIO
Topic: Reset of MMSI for DSC Radio by End User
Replies: 21
Views: 55251

Re: Reset of MMSI for DSC Radio by End User

Yea - Success! I was finally able to update to V2.03 using my iMac. Going to look into the change of the MMSI from our old boat we sold to the Nantucket 190.
by InVision
Thu Sep 28, 2017 10:22 am
Forum: The GAM
Topic: "Unsinkable" + Book Signings
Replies: 9
Views: 6572

Re: "Unsinkable" + Book Signings

Congrats Jim and Continuous Wave !!

Page 129 :-)
by InVision
Wed Sep 27, 2017 11:55 am
Forum: The GAM
Topic: 2018 Dauntless 170 Cover
Replies: 13
Views: 8294

Re: 2018 Dauntless 170 Cover

For the last three boats I have owned (including two new boats) I have had custom full covers made by LaPortes Products . I also am having them build a full cover for our 2004 Nantucket 190. I have been very happy with all the covers. I recommend getting a full cover for that new Dauntless [from] wh...
by InVision
Wed Sep 27, 2017 9:52 am
Forum: VHF MARINE RADIO
Topic: Reset of MMSI for DSC Radio by End User
Replies: 21
Views: 55251

Re: Reset of MMSI for DSC Radio by End User

[I] can't change MMSI of [my HX870] radio because [it has firmware version] V1.13, and the updater only works with Windows OS. Our home is all Mac OS computers.
by InVision
Tue Sep 26, 2017 9:27 am
Forum: The GAM
Topic: VENTURA with Sterndrive
Replies: 9
Views: 5190

Re: VENTURA with Sterndrive

I agree, no worries. [The seller of the boat under discussion] y sent me the paperwork: boat was built in Edgewater in Aug 2002. I really liked the layout of this boat, but the saltwater has taken it toll on the 350 Mag and sterndrive. I believe it would be a great boat restored and a very unique Bo...
by InVision
Tue Sep 26, 2017 8:43 am
Forum: The GAM
Topic: VENTURA with Sterndrive
Replies: 9
Views: 5190

Re: VENTURA with Sterndrive

I never said [the boat under discussion] was a Ventura. I said it looked like a Ventura. [The seller in the linked advertisement said the boat was a Ventura hull--jimh] The [HIN] is WCGxxxxxxx so it is a commercial vessel. Owner says "Coast Guard" vessel. EDIT: I meant Navy. [Advertisement...
by InVision
Mon Sep 25, 2017 11:32 am
Forum: The GAM
Topic: 2018 Dauntless 170 Cover
Replies: 13
Views: 8294

Re: Covering a Whaler?

If I purchased a new Boston Whaler I would want a cover to protect my investment. We have a 2004 and I am currently searching for a cover for it.
by InVision
Sun Sep 24, 2017 8:22 am
Forum: The GAM
Topic: What a surprise !
Replies: 2
Views: 3150

What a surprise !

The original owner of the 2004 Boston Whaler 190 Nantucket we recently purchased dropped off all the original paperwork including serialized Boston Whaler zip bag that came with the boat when it was new. What a surprise ! Photo below including the manuals from the battery switch and charger I instal...
by InVision
Sun Sep 24, 2017 2:40 am
Forum: REPAIRS and MODIFICATIONS
Topic: 2004 190 Nantucket Modifications
Replies: 3
Views: 2990

Re: 2004 190 Nantucket Modifications

I had a smaller SS 3-spoke ones on my last few boats. I even had the Edson ($$$) with cushion back grip and PowerKnob which I liked very much on my last 25ft CC.



M
by InVision
Sat Sep 23, 2017 5:44 pm
Forum: REPAIRS and MODIFICATIONS
Topic: 2004 190 Nantucket Modifications
Replies: 3
Views: 2990

Re: 2004 190 Nantucket Modifications

Really Weird. My posts keep changing, even the title. Is that the site admin? If so I am sorry my posts are not to your liking...

Thanks,

M
by InVision
Sat Sep 23, 2017 6:15 am
Forum: The GAM
Topic: VENTURA with Sterndrive
Replies: 9
Views: 5190

Re: VENTURA with Sterndrive

Thanks for your comment. Since buying a 190 Nantucket I have been reading and internet surfing BW extensively. I have never seen this configuration. It might be one of a kind or even a customized, not a clue.

M
by InVision
Sat Sep 23, 2017 4:12 am
Forum: The GAM
Topic: VENTURA with Sterndrive
Replies: 9
Views: 5190

VENTURA with Sterndrive

This [now deleted FOR SALE listing] for a Boston Whaler looks like a Ventura with a sterndrive. How rare these are? Anyone ever seen one? The condition of sterndrive looks like a negative.--M
by InVision
Fri Sep 22, 2017 8:09 am
Forum: REPAIRS and MODIFICATIONS
Topic: 2004 190 Nantucket Modifications
Replies: 3
Views: 2990

2004 190 Nantucket Modifications

Our 2004 Nantucket 190 has now had three changes from stock: --dual batteries [with 120-VAC battery charger] --leaning post backrest with two rod holders --Edson solid PowerKnob on steering wheel --my favorite modification Holes had to be drilled only for the dual batteries; the other modifications ...
by InVision
Thu Sep 21, 2017 2:27 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Leaning post for 190 Nantucket-Outrage
Replies: 6
Views: 5275

Re: Leaning post for 190 Nantucket-Outrage

Well ours arrives today. It was much more than $270. Each welded rod holder was $90 option. You can never have TOO MANY rod holders :-)

M