Search found 202 matches
- Thu Nov 02, 2017 5:01 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Hierarchy of Engine Instrumentation
- Replies: 7
- Views: 4694
Re: Hierarchy of Engine Instrumentation
I respectfully disagree about engine temp gauge. Here, in salt water conditions, water passages in the engine can get clogged. A temperature gauge is useful if pressure is normal but the engine runs hotter than normal.
- Tue Oct 31, 2017 11:01 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Tachometer Placement
- Replies: 8
- Views: 5255
Re: Tachometer Placement
[REPLY TO NEW TOPIC--please post your remarks to the new topic in a new thread on that topic. See
viewtopic.php?f=6&t=2827
--jimh]
viewtopic.php?f=6&t=2827
--jimh]
- Mon Oct 30, 2017 9:14 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Tachometer Placement
- Replies: 8
- Views: 5255
Re: Tachometer Placement
[CHANGED THE SUBJECT--please repost your remarks on the new subject in a new thread on that topic. See
viewtopic.php?f=6&t=2827
--jimh]
viewtopic.php?f=6&t=2827
--jimh]
- Tue Oct 24, 2017 8:13 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Through-hull Fitting Repairs c.2004 190 NANTUCKET
- Replies: 46
- Views: 28819
Re: Through-hull Fitting Repairs c.2004 NANTUCKET
For the Record - I am very grateful that vze2gbs4 pointed out that I should inspect the thru-hulls. Boat US had a write up last month about inspecting and showed a photo that looked exactly like what I found on our 190 Nantucket. Interesting fact in article was that the concern is usually caused by ...
- Sat Oct 21, 2017 11:28 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1996 Evinrude 70 hp: Alarm Horn
- Replies: 50
- Views: 24405
Re: 1996 Evinrude 70 hp: Alarm Horn
I just want to note that Jim's posts of plug illustration is invaluable !!
Wealth of info.
M
Wealth of info.
M
- Sat Oct 21, 2017 6:29 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1996 Evinrude 70 hp: Alarm Horn
- Replies: 50
- Views: 24405
Re: 1996 Evinrude 70 hp: Alarm Horn
Similarly, on our 190 Nantucket we would get a warning of four-BEEPS every two minutes from the Mercury OPTI 150. I had to replace the engine oil tank because the magnetic float broke in the sealed tank. DISCUS' should be very concerned about the red [Amphenol multi-pole] plug. If a wire in the plug...
- Fri Oct 20, 2017 1:40 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1996 Evinrude 70 hp: Alarm Horn
- Replies: 50
- Views: 24405
Re: 1996 Evinrude 70 hp: Alarm Horn
I do not have one of these motors so I may ask a stupid question...
Curious about the plug in general. Could you not put solder connectors on each of the wires and heat shrink them. What does the plug buy you besides misery?
M
Curious about the plug in general. Could you not put solder connectors on each of the wires and heat shrink them. What does the plug buy you besides misery?
M
- Fri Oct 20, 2017 12:14 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1996 Evinrude 70 hp: Alarm Horn
- Replies: 50
- Views: 24405
Re: 1996 Evinrude 70 hp: Alarm Horn
IMHO I would replace the connector. Then I would apply corrosion-X to both sides before connecting.
M
M
- Thu Oct 19, 2017 9:07 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1996 Evinrude 70 hp: Alarm Horn
- Replies: 50
- Views: 24405
Re: 1996 Evinrude 70 hp: Alarm Horn
I would bypass the oil and temp sensors and see if alarm goes away after you clean the "Red Plug". Downloading a service manual with flow charts on troubleshooting would also help. I found a bad sensor in oil tank on our Mercury OPTI 150 by purchasing a service manual off of eBay. Good Luc...
- Thu Oct 19, 2017 6:52 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1996 Evinrude 70 hp: Alarm Horn
- Replies: 50
- Views: 24405
Re: 1996 Evinrude 70 hp: Alarm Horn
If you just turn on the key and not start engine does the alarm sound?
IMHO I would check the oil sensor and the engine temp sensor.
M
IMHO I would check the oil sensor and the engine temp sensor.
M
- Wed Oct 18, 2017 8:43 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Bow Rail Rod Holders
- Replies: 6
- Views: 5071
Bow Rail Rod Holders
I am sure most members have notice that one thing that seemed to be missing on the 190 Nantucket was bow rod holders. I wanted to add a couple and found these on Amazon for $42 a pair. Was very surprised how high quality they were for that price. Install in minutes. Added some Locktite to screws to ...
- Wed Oct 18, 2017 4:51 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Trim Tabs for 190 Nantucket-Outrage
- Replies: 28
- Views: 15348
Re: Trim Tabs for 190 Nantucket-Outrage
'VISION--what aspect of the boat's performance after a few outings led you to conclude that the hull needed trim tabs? Do you think the hull needs trim tabs to get on plane better? Do you think the hull needs trim tabs to even out the lateral trim? Jim - Mostly operation in shallow waters which we ...
- Tue Oct 17, 2017 11:50 am
- Forum: The GAM
- Topic: 2013 Dauntless 170 Fuel Tank
- Replies: 9
- Views: 6664
Re: 2013 Dauntless 170 Fuel Tank
For reference, a 2004 Nantucket has a molded polyethylene fuel tank.
- Tue Oct 17, 2017 10:23 am
- Forum: The GAM
- Topic: 2013 Dauntless 170 Fuel Tank
- Replies: 9
- Views: 6664
Re: 2013 Dauntless 170 Fuel Tank
Our 190 Nantucket [fuel tank] is something--not metal. I believe [the fuel tank] is molded polyethylene.
M
M
- Mon Oct 16, 2017 3:07 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Trim Tabs for 190 Nantucket-Outrage
- Replies: 28
- Views: 15348
Re: Trim Tabs for 190 Nantucket-Outrage
I like that installation. Being toward the outside it seems you have better adjustments. If only it was not drilling holes which I hate. May consider having it done at the service shop. Can anyone talk to how much effort is involved in a DIY?
M
M
- Mon Oct 16, 2017 9:44 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Trim Tabs for 190 Nantucket-Outrage
- Replies: 28
- Views: 15348
Re: Trim Tabs for 190 Nantucket-Outrage
I did and I fixed it thanks Jim !!
M
M
- Mon Oct 16, 2017 8:48 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Trim Tabs for 190 Nantucket-Outrage
- Replies: 28
- Views: 15348
Trim Tabs for 190 Nantucket-Outrage
Based on a few outings in our newly acquired use 190 Nantucket with Mercury 150-HP OptiMax, I think trim tabs might be very helpful. [Wants to see] photos of trim tabs installed on a 190 Nantucket or 190 Outrage. I have read the article by Jim on Seymour's install of electric trim tabs. Not sure I l...
- Fri Oct 13, 2017 1:40 pm
- Forum: The GAM
- Topic: Replacement Decals for Mercury Smartcraft
- Replies: 3
- Views: 3098
Replacement Decals for Mercury Smartcraft
Where can I get a replacement sticker [that says "Smartcraft"] for my console?
- Fri Oct 13, 2017 12:05 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Through-hull Fitting Repairs c.2004 190 NANTUCKET
- Replies: 46
- Views: 28819
Re: Through-hull Fitting Repairs c.2004 NANTUCKET
I can't see tighten all that tight with plastic thru-hulls. Made a 3" long aluminum tube with grip on outside to fit plastic nuts. Going to hand tighten then let cure for 24 hours and follow up with tightening with aluminum tube tool I made. Made an aluminum lobster measure stick into a tool to...
- Fri Oct 13, 2017 6:18 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Boat cover for 2004 Nantucket 190.
- Replies: 6
- Views: 4740
Re: Boat cover for 2004 Nantucket 190.
Don't really need the shock cords in normal weather. I put them together for winter storage or wind storms. The side shock cords are very easy with the help of a boat hook. The front shock cord is rigged with the help of the loose board seen laying in the front of dock. It lays at a diagonal from si...
- Thu Oct 12, 2017 9:35 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Boat cover for 2004 Nantucket 190.
- Replies: 6
- Views: 4740
Re: Boat cover for 2004 Nantucket 190.
Well got our cover today. We like it !!
M
M
- Thu Oct 12, 2017 9:49 am
- Forum: The GAM
- Topic: Advice on SPORT 15 and DAUNTLESS 15
- Replies: 22
- Views: 11540
Re: Classic 15 sport or dauntless 15 - advice please
Curious where in the US are you? My Neighbor has a 2012 Sport for sale. Very clean boat no bottom paint. We are in Destin FL area.
M
M
- Wed Oct 11, 2017 9:34 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Through-hull Fitting Repairs c.2004 190 NANTUCKET
- Replies: 46
- Views: 28819
Re: Through-hull Fitting
It is a funny thing. One whaler dealer gave me different part numbers, but the latest dealer said both are the same the new Thru-Hull part number is 1772845. Since VZE2GBS4 used the same for both I suspect that is correct.
M
M
- Wed Oct 11, 2017 7:08 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Through-hull Fitting Repairs c.2004 190 NANTUCKET
- Replies: 46
- Views: 28819
Re: Through-hull Fitting
Yes Sir, installing OEM ones. Going to kick the can down the road again I guess you would say. These lasted 14 years so I am good with that they are less than $40 for both. Also all the press fit thru-hull are white and they are in excellent shape so I want them to match. Finding the correct bronze ...
- Tue Oct 10, 2017 4:23 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Through-hull Fitting Repairs c.2004 190 NANTUCKET
- Replies: 46
- Views: 28819
Re: Through-hull Fitting
I found the Boston Whaler new numbers for the two bad thru-hull fittings. All fittings were good except the Livewell and the starboard deck fitting. Interestingly they are the only two with [threaded retainer] nuts. All others are press fit. 1772845 [Updated part number] The fittings are $18 or so e...
- Tue Oct 10, 2017 10:40 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Through-hull Fitting Repairs c.2004 190 NANTUCKET
- Replies: 46
- Views: 28819
Re: Through-hull Fitting
I have two bad thru-hull fittings on our 2004 Nantucket 190 under the swim platform. Best I can tell they are Boston Whaler part numbers 0996538 and 0996546. I would like to find original parts. I have absolutely no luck. I have to look at after-market I guess. Not sure where to start. Kind of weird...
- Sat Oct 07, 2017 12:21 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Through-hull Fitting Repairs c.2004 190 NANTUCKET
- Replies: 46
- Views: 28819
Re: Through-hull Fitting
Good info. Will check our boat. What brand and part number work?
[Requests a photograph]
[Requests a photograph]
- Sat Oct 07, 2017 9:31 am
- Forum: The GAM
- Topic: 2003 Nantucket
- Replies: 9
- Views: 5509
Re: 2003 Nantucket
All good info. Two and half years of Nantucket 190. What was the production was during that time?
- Fri Oct 06, 2017 1:50 pm
- Forum: The GAM
- Topic: 2003 Nantucket
- Replies: 9
- Views: 5509
Re: NADA
NADA has most models correct that I have seen.
- Fri Oct 06, 2017 1:46 pm
- Forum: The GAM
- Topic: 2003 Nantucket
- Replies: 9
- Views: 5509
Re: 2003 Nantucket
That helps. So [the Nantucket 190] was produced from 2003 to 2005. NADA says no to 2003 Nantucket. I found a listing for sale.
- Fri Oct 06, 2017 8:59 am
- Forum: The GAM
- Topic: 2003 Nantucket
- Replies: 9
- Views: 5509
2003 Nantucket
I saw an advertisement for a 2003 Nantucket. I guess I never knew there was such a model. I thought Nantucket was only 2004 and 2005, and in the 190 model only.
- Wed Oct 04, 2017 7:21 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: Boat cover for 2004 Nantucket 190.
- Replies: 6
- Views: 4740
Re: Boat cover for 2004 Nantucket 190.
Well I decided to go with the folks that have custom made our covers in the past. I did not like any of the less expensive covers that I looked at. The canvas shop borrowed a Nantucket 190 like ours and fitted a pattern to it. Had them install a port side zipper for access when boat is on the lift. ...
- Mon Oct 02, 2017 5:19 pm
- Forum: VHF MARINE RADIO
- Topic: Reset of MMSI for DSC Radio by End User
- Replies: 21
- Views: 56031
Re: Reset of MMSI for DSC Radio by End User
The procedure worked even better than I though because it actually clears all MMSI info from radio. Very convenient if you were to sell radio used.
M
M
- Mon Oct 02, 2017 1:22 pm
- Forum: VHF MARINE RADIO
- Topic: Reset of MMSI for DSC Radio by End User
- Replies: 21
- Views: 56031
Re: Reset of MMSI for DSC Radio by End User
Horizon sent me the reset code by email today and and radio is now set for my current boat MMSI. All works as it should as far as I can tell. Great info, Jim!
M
M
- Sun Oct 01, 2017 4:02 pm
- Forum: The GAM
- Topic: "Unsinkable" + Book Signings
- Replies: 9
- Views: 6604
Re: "Unsinkable" + Book Signings
Sir,
I am almost through reading your fantastic book for a second time. Great work !
I do have a question for you. If there is an error do you want to know? Are there plans for revisions?
Thanks again,
M
I am almost through reading your fantastic book for a second time. Great work !
I do have a question for you. If there is an error do you want to know? Are there plans for revisions?
Thanks again,
M
- Sat Sep 30, 2017 10:53 am
- Forum: VHF MARINE RADIO
- Topic: Reset of MMSI for DSC Radio by End User
- Replies: 21
- Views: 56031
Re: Reset of MMSI for DSC Radio by End User
I got this response from Standard Horizon: Hi M: Glad you got the software working. The software you have is designed specifically for end users. The software necessary to remove the mmsi is only provided to dealers. You can contact your dealer to see if they are willing to part with it or provide t...
- Fri Sep 29, 2017 8:00 am
- Forum: VHF MARINE RADIO
- Topic: Reset of MMSI for DSC Radio by End User
- Replies: 21
- Views: 56031
Re: Reset of MMSI for DSC Radio by End User
Yea - Success! I was finally able to update to V2.03 using my iMac. Going to look into the change of the MMSI from our old boat we sold to the Nantucket 190.
- Thu Sep 28, 2017 10:22 am
- Forum: The GAM
- Topic: "Unsinkable" + Book Signings
- Replies: 9
- Views: 6604
Re: "Unsinkable" + Book Signings
Congrats Jim and Continuous Wave !!
Page 129 :-)
Page 129 :-)
- Wed Sep 27, 2017 11:55 am
- Forum: The GAM
- Topic: 2018 Dauntless 170 Cover
- Replies: 13
- Views: 8331
Re: 2018 Dauntless 170 Cover
For the last three boats I have owned (including two new boats) I have had custom full covers made by LaPortes Products . I also am having them build a full cover for our 2004 Nantucket 190. I have been very happy with all the covers. I recommend getting a full cover for that new Dauntless [from] wh...
- Wed Sep 27, 2017 9:52 am
- Forum: VHF MARINE RADIO
- Topic: Reset of MMSI for DSC Radio by End User
- Replies: 21
- Views: 56031
Re: Reset of MMSI for DSC Radio by End User
[I] can't change MMSI of [my HX870] radio because [it has firmware version] V1.13, and the updater only works with Windows OS. Our home is all Mac OS computers.
- Tue Sep 26, 2017 9:27 am
- Forum: The GAM
- Topic: VENTURA with Sterndrive
- Replies: 9
- Views: 5202
Re: VENTURA with Sterndrive
I agree, no worries. [The seller of the boat under discussion] y sent me the paperwork: boat was built in Edgewater in Aug 2002. I really liked the layout of this boat, but the saltwater has taken it toll on the 350 Mag and sterndrive. I believe it would be a great boat restored and a very unique Bo...
- Tue Sep 26, 2017 8:43 am
- Forum: The GAM
- Topic: VENTURA with Sterndrive
- Replies: 9
- Views: 5202
Re: VENTURA with Sterndrive
I never said [the boat under discussion] was a Ventura. I said it looked like a Ventura. [The seller in the linked advertisement said the boat was a Ventura hull--jimh] The [HIN] is WCGxxxxxxx so it is a commercial vessel. Owner says "Coast Guard" vessel. EDIT: I meant Navy. [Advertisement...
- Mon Sep 25, 2017 11:32 am
- Forum: The GAM
- Topic: 2018 Dauntless 170 Cover
- Replies: 13
- Views: 8331
Re: Covering a Whaler?
If I purchased a new Boston Whaler I would want a cover to protect my investment. We have a 2004 and I am currently searching for a cover for it.
- Sun Sep 24, 2017 8:22 am
- Forum: The GAM
- Topic: What a surprise !
- Replies: 2
- Views: 3161
What a surprise !
The original owner of the 2004 Boston Whaler 190 Nantucket we recently purchased dropped off all the original paperwork including serialized Boston Whaler zip bag that came with the boat when it was new. What a surprise ! Photo below including the manuals from the battery switch and charger I instal...
- Sun Sep 24, 2017 2:40 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2004 190 Nantucket Modifications
- Replies: 3
- Views: 3005
Re: 2004 190 Nantucket Modifications
I had a smaller SS 3-spoke ones on my last few boats. I even had the Edson ($$$) with cushion back grip and PowerKnob which I liked very much on my last 25ft CC.
M
M
- Sat Sep 23, 2017 5:44 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2004 190 Nantucket Modifications
- Replies: 3
- Views: 3005
Re: 2004 190 Nantucket Modifications
Really Weird. My posts keep changing, even the title. Is that the site admin? If so I am sorry my posts are not to your liking...
Thanks,
M
Thanks,
M
- Sat Sep 23, 2017 6:15 am
- Forum: The GAM
- Topic: VENTURA with Sterndrive
- Replies: 9
- Views: 5202
Re: VENTURA with Sterndrive
Thanks for your comment. Since buying a 190 Nantucket I have been reading and internet surfing BW extensively. I have never seen this configuration. It might be one of a kind or even a customized, not a clue.
M
M
- Sat Sep 23, 2017 4:12 am
- Forum: The GAM
- Topic: VENTURA with Sterndrive
- Replies: 9
- Views: 5202
VENTURA with Sterndrive
This [now deleted FOR SALE listing] for a Boston Whaler looks like a Ventura with a sterndrive. How rare these are? Anyone ever seen one? The condition of sterndrive looks like a negative.--M
- Fri Sep 22, 2017 8:09 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2004 190 Nantucket Modifications
- Replies: 3
- Views: 3005
2004 190 Nantucket Modifications
Our 2004 Nantucket 190 has now had three changes from stock: --dual batteries [with 120-VAC battery charger] --leaning post backrest with two rod holders --Edson solid PowerKnob on steering wheel --my favorite modification Holes had to be drilled only for the dual batteries; the other modifications ...
- Thu Sep 21, 2017 2:27 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Leaning post for 190 Nantucket-Outrage
- Replies: 6
- Views: 5305
Re: Leaning post for 190 Nantucket-Outrage
Well ours arrives today. It was much more than $270. Each welded rod holder was $90 option. You can never have TOO MANY rod holders :-)
M
M