I think a fair market price, given California location, is $9,000 to $11,000.
While the engine may be great, it is old. A new engine is $12,000 to $14,000.
A new trailer in California will cost $3,000 to $4,500.
Search found 2613 matches
- Sat Aug 26, 2023 7:22 pm
- Forum: MARKETPLACE
- Topic: Re: Appraisal on 1977 Newport PICTURES
- Replies: 3
- Views: 2827
- Tue Aug 22, 2023 5:01 pm
- Forum: PERFORMANCE
- Topic: 1982 OUTRAGE with HONDA BF150
- Replies: 14
- Views: 3324
Re: 1982 OUTRAGE with HONDA BF150
We are asking the questions to get you answers. We pick propeller that are good for MPG but also good for all speeds. If you select a prop that is only good between 18 to 22-nautical-miles=per-hour, the engine will have operational problems. Propeller selection is make and model dependent. One four-...
- Tue Aug 22, 2023 11:13 am
- Forum: PERFORMANCE
- Topic: 1982 OUTRAGE with HONDA BF150
- Replies: 14
- Views: 3324
Re: 1982 OUTRAGE with HONDA BF150
The wide open throttle (WOT) rpm range for the BF150 is 5000-6000.
Q11: What is the engine speed at full throttle when the boat is lightly loaded?
Q11: What is the engine speed at full throttle when the boat is lightly loaded?
- Tue Aug 22, 2023 9:39 am
- Forum: PERFORMANCE
- Topic: 1993 Outrage 21 Re-power
- Replies: 5
- Views: 2662
Re: 1993 210 Outrage Re-power
There was no 210 Outrage in 1993. The 1993 Outrage 21 has a minimum power rating of 150-HP and a maximum power rating of 300-HP.
At the time it was introduced the method of attaining 300-HP was from twin 150-HP engines. Therefore, I doubt 100-lbs will make a measurable impact.
At the time it was introduced the method of attaining 300-HP was from twin 150-HP engines. Therefore, I doubt 100-lbs will make a measurable impact.
- Sun Aug 20, 2023 8:00 pm
- Forum: PERFORMANCE
- Topic: 170 Montauk Engine Mounting Height Change
- Replies: 9
- Views: 2820
Re: 170 Montauk Engine Mounting Height Change
While the factory mounted the engine 1 hole up, dozens of Montauk 170 I owners have done testing and determined that 2-holes up, top bolt in the third hole counting down from the top is ideal for overall performance. Removing the bench seat and kicker will improve planing and overall performance as ...
- Sun Aug 20, 2023 11:13 am
- Forum: The GAM
- Topic: Source for cube shaped nuts used on combined sidelight lamp bollards
- Replies: 2
- Views: 2411
Re: Source for cube shaped nuts used on combined sidelight lamp bollards
While I doubt they are sold separately, check with Derek or Jason at the parts desk of Nauset Marine. Email them at parts@nausetmarine.com .
http://www.nausetmarine.com
http://www.nausetmarine.com
- Sat Aug 19, 2023 9:16 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1969 SPORT 13: Leftover Part
- Replies: 3
- Views: 2554
Re: 1969 SPORT 13: Leftover Part
The part shown in Figure 1 is the backing plate for the bow railing support.
There are two of them, one on each side of the hull, forward to support the vertical stanchion. They insert from the outside into the two holes. The two machine screws threat into it.
There are two of them, one on each side of the hull, forward to support the vertical stanchion. They insert from the outside into the two holes. The two machine screws threat into it.
- Fri Aug 18, 2023 5:21 pm
- Forum: PERFORMANCE
- Topic: 1982 OUTRAGE with HONDA BF150
- Replies: 14
- Views: 3324
Re: 1982 Outrage & 150 HP Honda
If I had to guess the prop is possibly a Solas. We need to know the engine mounting height. How many empty holes are above the top bolts? What is the wide-open-throttle (WOT) rpm at top speed with a typical load? My list for the Outrage 18 with the Honda BF 150 includes**: Honda "Turbo" 14...
- Fri Aug 18, 2023 1:37 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Life with my Carburetor Mercury-Yamaha FourStroke (continued)
- Replies: 30
- Views: 28060
Re: Life with my Carburetor Mercury-Yamaha FourStroke (continued)
One of the proven preventive measures when running a Mercaha motor is to add Mercury Quickleen to every gallon of gas. This seems to stop the carburetors from getting the perpetual gummed up condition
- Fri Aug 18, 2023 1:32 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Life with my Carburetor Mercury-Yamaha FourStroke (continued)
- Replies: 30
- Views: 28060
Re: Life with my Carburetor Mercury-Yamaha FourStroke (continued)
There is no grease nipple for the steering cable in the tilt tube only for the tilting feature of the engine. In the States the recommendation is to change the port side nut on the tilt tube with a nut that has a grease fitting. https://www.wholesalemarine.com/steersman-boat-steering-guard-1.html Fr...
- Thu Aug 17, 2023 6:38 pm
- Forum: The GAM
- Topic: Source for Suntop Straps
- Replies: 2
- Views: 2475
- Wed Aug 16, 2023 9:15 pm
- Forum: PERFORMANCE
- Topic: 130 SPORT with 40-HP
- Replies: 14
- Views: 3174
Re: 130 SPORT with 40-HP
I would want to verify the gear ratio of the current Mercury 40 is the same. They occasionally change.
The new 130 SuperSport is heavier than your model.
I would try the Spitfire in that lower pitch I suggested.
The new 130 SuperSport is heavier than your model.
I would try the Spitfire in that lower pitch I suggested.
- Wed Aug 16, 2023 6:52 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Engine Water Pressure Drops with Engine Speed Increase
- Replies: 16
- Views: 9134
Re: Engine Water Pressure Drops with Engine Speed Increase
Make sure the impeller was installed correctly. There is an orientation to them.
- Mon Aug 14, 2023 3:08 pm
- Forum: The GAM
- Topic: Boat for Boston Harbor, New England Coast
- Replies: 11
- Views: 3329
Re: Which boat for boston harbor and new england coast?
While the modern 150 has a better hull design and rides smoother, the shorter LOA degrades the ride in rougher conditions. To limit towing to a Pilot (5,000lb) limit I would suggest, in order of preference: 1 - Outrage 17 II (1996-1999) 1700lb hull 2 - Outrage 17 I (1990-1995 1050lb hull 3 - Montauk...
- Mon Aug 14, 2023 1:21 pm
- Forum: The GAM
- Topic: Boat for Boston Harbor, New England Coast
- Replies: 11
- Views: 3329
Re: Boat for Boston Harbor, New England Coast
For the New England coast, the models you listed are very small and will severely limit the days that are comfortable to go out. The afternoon southerly breeze kicks up and the sea state can deteriorate. Fast. You really pay the price when in a short length overal (LOA) boat. Two feet LOA makes a wo...
- Mon Aug 14, 2023 1:03 pm
- Forum: PERFORMANCE
- Topic: 130 SPORT with 40-HP
- Replies: 14
- Views: 3174
Re: 130 SPORT with 40-HP
With elevation comes reduced atmospheric pressure and combustion engines suffer performance degradation. Electronic fuel injected motors experience less drop than carburated engines. At 5100 ft above sea level you loose 6.1 horsepower. The 40hp is now a 33.9 hp engine. The Black Max 14 pitch came wi...
- Sun Aug 13, 2023 7:32 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1991 OUTRAGE 17 Transom “Disk” Purpose
- Replies: 5
- Views: 2523
Re: 1991 OUTRAGE 17 Transom “Disk” Purpose
[The disk on the transom of the 1991 OUTRAGE 17] is part of the grounding system for the fuel tank. There is a wire with green insulatoion that goes from the fuel fill to the fuel tank and then a second wire that leads overboard to an [electrode] that is under the waterline. You can replace [the bro...
- Sun Aug 13, 2023 5:49 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2001 Mercury 90 Will Only Run at Idle Throttle
- Replies: 4
- Views: 2521
Re:2001 Mercury 90 Will Only Run at Idle Throttle
Start with the cables.
Pull the cover and inspect the end of the throttle cable. Then check the cable end at the remote throttle control.
Pull the cover and inspect the end of the throttle cable. Then check the cable end at the remote throttle control.
- Sun Aug 13, 2023 5:47 pm
- Forum: The GAM
- Topic: 190 NANTUCKET Seats
- Replies: 4
- Views: 2715
Re: 190 NANTUCKET Seats
You can obtain the rear seat cushion bottom and backrest from Andersons Mfg. They are an OEM quality vendor.
http://www.amfg.us/about-us
Give Tena a call.
http://www.amfg.us/about-us
Give Tena a call.
- Sun Aug 13, 2023 11:31 am
- Forum: The GAM
- Topic: 190 NANTUCKET Seats
- Replies: 4
- Views: 2715
Re: 190 NANTUCKET Seats
If you only need moderate cooling and decent seating, go with the cost effective classic Igloo Marine Elite cooler. This is sized for the OEM cushions from Anderson Mfg. Note this is NOT the new redesigned cooler series. https://www.westmarine.com/igloo-54-qt.-marine-elite-cooler-19991124.html Note ...
- Sun Aug 13, 2023 11:26 am
- Forum: MARKETPLACE
- Topic: Appraisal: 1978 MONTAUK
- Replies: 4
- Views: 2859
Re: Appraisal: 1978 montauk
Without knowing location, I appraise the boat selling for $6,000 to $8,000.
In California the boat could sell for a bit higher price, and in Florida sell for a bit less.
In California the boat could sell for a bit higher price, and in Florida sell for a bit less.
- Sun Aug 13, 2023 11:24 am
- Forum: MARKETPLACE
- Topic: FS: 1985 OUTRAGE 18 $30,000 Alexandria, Virginia
- Replies: 2
- Views: 2681
Re: FS: 1985 OUTRAGE 18 $30,000 Alexandria, Virginia
The market will be slow to respond to that asking price.
For that money, the teak/mahogany would be pristine, gelcoat shiny, OEM cushions from Anderson's Mfg. and an engine that is less than 10 years old.
Post photos that show that and you will have some bites.
For that money, the teak/mahogany would be pristine, gelcoat shiny, OEM cushions from Anderson's Mfg. and an engine that is less than 10 years old.
Post photos that show that and you will have some bites.
- Fri Aug 11, 2023 2:54 pm
- Forum: PERFORMANCE
- Topic: 2004 220 DAUNTLESS VERADO 225
- Replies: 25
- Views: 8216
Re: 2004 220 DAUNTLESS VERADO 225
If you look at the factory test, the weather is typically tropical, no wind, no current, no waves, very little fuel, no water, no gear or equipment. One person and no bottom paint. Q5: Are you running premium fuel? The bottom paint and fuel can easily explain the difference. That engine hour report ...
- Fri Aug 11, 2023 12:04 pm
- Forum: The GAM
- Topic: Boat for Long Island Sound: c.2002 230 OUTRAGE
- Replies: 25
- Views: 4573
Re: Boat for Long Island Sound: c.2002 230 OUTRAGE
You really should do a comprehensive sea trial when purchasing a boat that substantial.
Hopefully you can find some poor conditions to give you a sense of how she handles in the snot.
Hopefully you can find some poor conditions to give you a sense of how she handles in the snot.
- Thu Aug 10, 2023 3:15 pm
- Forum: The GAM
- Topic: Boat for Long Island Sound: c.2002 230 OUTRAGE
- Replies: 25
- Views: 4573
Re: Boat for Long Island Sound: c.2002 230 OUTRAGE
Unless you plan on servicing the engine yourself assess which, if any, local dealers service E-TEC engines.
Many dealers have ended service of E-TEC engines as a matter of principle--very short sighted if you ask me.
Many dealers have ended service of E-TEC engines as a matter of principle--very short sighted if you ask me.
- Thu Aug 10, 2023 11:39 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2004 255 Conquest Hatch Repair
- Replies: 2
- Views: 2161
Re: 2004 255 Conquest Hatch Repair
The repair technique you describe is appropriate for the hatches.ammarineli wrote:Q2: is my proposed method a good method?
If the hatches that are not failing have a green line indicating exposed fiberglass, give them a thin coat of sealant to prevent them absorbing moisture.
- Wed Aug 09, 2023 11:41 am
- Forum: The GAM
- Topic: Frequently and Infrequently Asked Questions: Hull Identification Numbers; Conformance Markings
- Replies: 12
- Views: 3293
Re: Frequently and Infrequently Asked Questions: Hull Identification Numbers; Conformance Markings
Ivo - You can get authentic reproduction capacity plate and the HIN plate from Magic Brush in the US state of Florida. She will authenticate your hull with the factory and produce the accurate plate and tag. Request the metal plate not the decal option. She made a set for me. She ships international...
- Tue Aug 08, 2023 7:01 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Removing Water From Fuel Tank Cavity Drain
- Replies: 2
- Views: 2392
Re: Removing Water From Fuel Tank Cavity Drain
For all models that include a below deck fuel tank, the bottom of the tank cavity is below the level of the bilge. The only model I can think of where it is practical to install a drain tube in the aft wall of the fuel cavity is the 1984-1989 Revenge 22 and 25 with the aft fish well. Several members...
- Tue Aug 08, 2023 6:49 pm
- Forum: The GAM
- Topic: Boat for Casco Bay, Maine
- Replies: 2
- Views: 2475
Re: Boat for Casco Bay, Maine
Having lived on Casco Bay for more than ten years and transited the waters eight months, March to October, every year, my perspective is that despite the geography and barrier islands, Casco Bay is rarely calm and is frequently crappy. There are short wind-created waves, intermittent ocean swells, c...
- Fri Aug 04, 2023 11:56 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1991 Outrage 17 Sump Pump
- Replies: 16
- Views: 3834
Re: 1991 Outrage 17 Sump Pump
Your 1991 OUTRAGE 17 boat has been really messed with. The console switches [see Figure 1 above] are not original. The method of energizing the rear is obtuse. I would not like it and would re-wire the switches so they are energized at the console only as most owners have done. The livewell pump wil...
- Thu Aug 03, 2023 2:52 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 16-footer Hull Paint Scheme
- Replies: 2
- Views: 2443
Re: 16-footer Hull Paint Scheme
The hull and deck colors are not paint; they are tinted gel coat resin. As for the original color scheme, you should detail the outside gunwales and interior to remove the oxidation and bring back the reflection. Owners are shocked to see the color and visual improvement in compounding the boat. If ...
- Thu Aug 03, 2023 2:20 pm
- Forum: PERFORMANCE
- Topic: 1980 OUTRAGE V-20 with 250-HP
- Replies: 2
- Views: 2547
Re: 1980 OUTRAGE V-20 with 250-HP
The V-20 is sensitive to porposing as outlined in the reference article from Sal Mercurio's owner testimonial. See https://continuouswave.com/whaler/reference/V20Outrage/ I think with proper engine mounting (three-holes up from lowest, as high as possible) and a good stern lifting propeller, you sho...
- Thu Aug 03, 2023 2:14 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Electrical Switch
- Replies: 6
- Views: 2869
Re: Electrical Switch
The original dash switches for the Outrage 17 I were push-pull Cole Hersee switches. Through the years, owners have upgraded switches to include rocker style. A good vendor of switches and panels is http://www.newwiremarine.com Many Whaler owners have used them and I highly recommend them for their ...
- Thu Aug 03, 2023 2:08 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1991 Outrage 17 Sump Pump
- Replies: 16
- Views: 3834
Re: 1991 Outrage 17 Sump Pump
The 1990-1995 Outrage 17 I is a unique model in that it has a sump that is well below the waterline and it is not recommended to run the boat with the sump drain plug left open. A bilge pump is recommended for this and other reasons. While there are deck drains in the transom, on the 1991 model the ...
- Thu Aug 03, 2023 1:58 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1991 Outrage 17 Sump Pump
- Replies: 16
- Views: 3834
Re: 1991 Outrage 17 Sump Pump
The bilge pump is located in the stern sump. Walk aft, pull the cover to the baitwell. Remove the tub insert. Looking straight down, the pump should be in the lower level (left) of the sump. It could have a separate float switch or one that is integrated into the pump. The bilge switch is either a t...
- Wed Aug 02, 2023 9:52 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2001 E-Z-LOADER Trailer Replacement Spring Hanger
- Replies: 3
- Views: 2345
Re: 2001 E-Z-LOADER Trailer Replacement Spring Hanger
From reviewing the EZ Loader parts available, it appears the assembly can be made up by seperate comonents.
https://www.easternmarine.com/search/hanger%20bracket?brand=205
https://www.easternmarine.com/search/hanger%20bracket?brand=205
- Wed Aug 02, 2023 9:26 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2001 E-Z-LOADER Trailer Replacement Spring Hanger
- Replies: 3
- Views: 2345
Re: 2001 E-Z-LOADER Trailer Replacement Spring Hanger
Given the importance of this piece of hardware, I would not trust welding as it requires the removal of the galvanization. The galvanization material is highly toxic. Also note that the galvanization process penetrates the metal so its full removal is highly difficult. Welding requires the proper ma...
- Sat Jul 29, 2023 12:07 pm
- Forum: PERFORMANCE
- Topic: TENDER 11 Four-stroke-power-cycle Engine
- Replies: 7
- Views: 2723
Re: 4 stroke power for 11’ tender
Check the weigh of the 15 and 20 and then add the additional weight to what you have in the boat.
You may find you need to shop across brands to find the least heavy.
Shop dealers hard, prices vary a lot.
You may find you need to shop across brands to find the least heavy.
Shop dealers hard, prices vary a lot.
- Fri Jul 28, 2023 1:24 pm
- Forum: The GAM
- Topic: Assessing Hull with Unusual Cracking
- Replies: 10
- Views: 3087
Re: Assessing Hull with Unusual Cracking
Remember these boats are hand made. The photo above shows gelcoat spider cracking that is typically found on curving or corner surfaces when it was applied too thickly and has dried out due to exposure. It is cosmetic. Detailing the gelcoat and removing the oxidation will lessen the visual sign of t...
- Fri Jul 28, 2023 1:19 pm
- Forum: The GAM
- Topic: 2000 Outrage 18 Fuel Tank Replacement
- Replies: 7
- Views: 3056
Re: 2000 Outrage 18 Fuel Tank Replacement
This model was only produced for 1 year, 2000.
The boat with only 135-HP is underpowered based on the published hull weight of 2,500-lbs and the experience with other models. I would expect a 175-HP or 200-HP engine would be appropriate.
The boat with only 135-HP is underpowered based on the published hull weight of 2,500-lbs and the experience with other models. I would expect a 175-HP or 200-HP engine would be appropriate.
- Fri Jul 28, 2023 1:06 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: For a 1994 16 SL: Add T-Top or Canvas Top
- Replies: 2
- Views: 1892
Re: For a 1994 16 SL: Add T-Top or Canvas Top
A bimini is the recommended approach.
Carver is a respected brand for Boston Whaler's.
Follow these instructions. Order the stainless steel option.
https://www.boatcoversdirect.com/products/bimini_tops/by_dimensions/
Carver is a respected brand for Boston Whaler's.
Follow these instructions. Order the stainless steel option.
https://www.boatcoversdirect.com/products/bimini_tops/by_dimensions/
- Fri Jul 28, 2023 1:04 pm
- Forum: The GAM
- Topic: Vendor for OEM Canvas Replacement
- Replies: 1
- Views: 2388
Re: Vendor for OEM Canvas Replacement
You just need a piece of Sunbrella fabric, some grommets and sail cord.
https://oceansouth.us/product/classic-t-top-replacement-fabrics/
https://fishmaster.com/t-top-replacement-cover.html
https://ameritexdirect.com/products/t-top-canvas/
https://oceansouth.us/product/classic-t-top-replacement-fabrics/
https://fishmaster.com/t-top-replacement-cover.html
https://ameritexdirect.com/products/t-top-canvas/
- Fri Jul 28, 2023 12:58 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: Cutting Unibond Hull in Half to Add Length
- Replies: 5
- Views: 2395
Re: Cutting Unibond Hull in Half to Add Length
You would need extensive fiberglassing experience.
The required effort would amount to hundreds of hours, thousands of dollars and a wrecked hull with limited to no resale value.
Get a 17' Super Sport instead.
The required effort would amount to hundreds of hours, thousands of dollars and a wrecked hull with limited to no resale value.
Get a 17' Super Sport instead.
- Wed Jul 26, 2023 2:42 pm
- Forum: SMALL BOAT ELECTRICAL
- Topic: Perko Battery Swtich Needs replacing
- Replies: 6
- Views: 2690
Re: Perko Battery Swtich Needs replacing
George - Just replace with another 8501 or a Blue Seas 9001E or a BEP. PERKO 8501DP https://www.perko.com/catalog/battery_switches/148/medium_duty_battery_selector_switch/ BLUE SEA SYSTEMS 9001e https://www.bluesea.com/products/9001e/e-Series_Selector_Battery_Switch BEP 701S-B https://www.bepmarine....
- Wed Jul 26, 2023 2:40 pm
- Forum: The GAM
- Topic: Assessing Hull with Unusual Cracking
- Replies: 10
- Views: 3087
Re: Assessing Hull with Unusual Cracking
Post some photos.
- Wed Jul 26, 2023 2:36 pm
- Forum: The GAM
- Topic: Vendor for new Outboard Engines
- Replies: 2
- Views: 2545
Re: Vendor for new Outboard Engines
Unless it is less than 60hp, I do not know of anyone who has had a good experience with any "online" vendor. You need to look at a local dealers. If you list your general location and what brands you are considering, we may be able to suggest a shop or two. If you are trying to go cheap on...
- Wed Jul 26, 2023 2:33 pm
- Forum: The GAM
- Topic: SPORT 15 Seating: OEM or Not
- Replies: 2
- Views: 2400
Re: Assessing 1977 15ft sport
Not that there is anything wrong with those.
- Wed Jul 26, 2023 2:29 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 2016 240 DAUNTLESS; Water Seeping from Screw Fastener Hole
- Replies: 3
- Views: 2370
Re: 2016 240 DAUNTLESS; Water Seeping from Screw Fastener Hole
Every screw into the boat should have sealant in the hole and under the head. Prior to installing the new pump, you want to remove as much water as practical. ⋅ Over-drill the holes by two bit sizes; ⋅ suck some of the surface water out using a shop vacuum on each hole; note resu...
- Thu Jul 20, 2023 10:47 am
- Forum: REPAIRS and MODIFICATIONS
- Topic: ULTRA MARINE or FLOUNDER POUNDER as Vendor
- Replies: 5
- Views: 2127
Re: ULTRA MARINE or FLOUNDER POUNDER as Vendor
Ultra Marine and Flounder Pounder have a solid reputation and many Whaler owners sing their praises. Flounder Pounder offers OEM parts that are overstock so you know the items provenance. Ultra Panel is a bit on the expensive side and many owners have turned to less expensive options for dash panels...
- Wed Jul 19, 2023 7:03 pm
- Forum: REPAIRS and MODIFICATIONS
- Topic: 1991 Outrage 19 Navigation Lamp Restoration
- Replies: 6
- Views: 2309
Re: 1991 Outrage 19 Navigation Lamp Restoration
The [combined sidelight lamp seen in Figure 2] is available from Nauset Marine.
https://www.nausetmarine.com/boston-whaler-parts/lighting-and-electrical/light-assemblies/1035203-bow-light/
https://www.nausetmarine.com/boston-whaler-parts/lighting-and-electrical/light-assemblies/1035203-bow-light/