Search found 172 matches

by conch
Sat Apr 01, 2017 10:06 am
Forum: PERFORMANCE
Topic: 1983 15-footer Maximum Transom Weight
Replies: 26
Views: 20092

Re: 1983 15-footer Maximum Transom Weight

I would hang that 90hp Yamaha on in a heartbeat,or you can sell that 35 year old Mercury and the 90 Yamaha and put the very desirable F70 Yamaha four stroke on.

2004 Yamaha 90hp usually sell for about $4,500 in good condition in south Florida.
Chuck
by conch
Wed Mar 29, 2017 8:41 am
Forum: REPAIRS and MODIFICATIONS
Topic: 1991 Johnson 70-HP Shift Rod
Replies: 2
Views: 3593

Re: 1991 Johnson 70-HP Shift Rod

Check your service manual for the shift rod height measurement for your engine. With the shift rod offset to the front ,the height for my 1998 70hp Johnson 20in shaft motor in neutral is 21 15/16in. If the shift rod is completely removed,start with an initial 9 turns in. The height is measured from ...
by conch
Sun Mar 12, 2017 1:15 pm
Forum: PERFORMANCE
Topic: 270 OUTRAGE Twin Engines: Engine RPM at WOT
Replies: 7
Views: 8305

Re: 270 OUTRAGE Twin Engines: Engine RPM at WOT

D4655, not sure what you mean by "stock propeller" but turning 19in FOUR blade props could be asking too much from that combo. Certainly not a deal breaker, let the seller have corrections made to your satisfaction regarding WOT RPM. Common 4 blades for that rig are the Mercury Rev 4 in 17...
by conch
Thu Mar 09, 2017 5:44 am
Forum: REPAIRS and MODIFICATIONS
Topic: 15 footer anchor locker water level
Replies: 5
Views: 3870

Re: 15 footer anchor locker water level

This would really depend on how your 15 is rigged. Maybe you can see a water line on the locker gelcoat. I have no water in my anchor locker at rest with a 70hp Johnson, battery, and two six gallon fuel tanks behind the rear seat.
Chuck
by conch
Wed Mar 08, 2017 1:17 pm
Forum: MARKETPLACE
Topic: 1980 Montauk repowered 90E-tec
Replies: 1
Views: 2507

1980 Montauk repowered 90E-tec

Not mine, I saw this relisted today on THT in the marketplace. So far the Admiral says I cannot have a fourth boat,we will see.
http://www.thehulltruth.com/boats-sale- ... wered.html

Chuck
by conch
Mon Feb 20, 2017 3:33 pm
Forum: The GAM
Topic: Offshore 27 v. 280 Outrage or 290 Outrage
Replies: 9
Views: 6827

Re: Offshore 27 v. 280 Outrage or 290 Outrage

ACROSS88--the 280 and 290 Outrage are similar and yet quite different from the open transom Offshore 27. I prefer an open transom for crossing the Gulfstream and fishing in a 26-foot boat if I need to get water out quickly. You most likely will have to re-power, but hulls can be found from $600 to $...
by conch
Mon Feb 20, 2017 2:32 pm
Forum: SMALL BOAT ELECTRICAL
Topic: Rebates; Miami Boat Show Sale
Replies: 2
Views: 3652

Re: Rebates; Miami Boat Show Sale

I really like the GX2200 radio. The price online at The GPS Store is $300 before the $40 rebate, along with free shipping and no sales tax to my home state.
by conch
Tue Nov 15, 2016 6:05 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Hull and Keel Protection
Replies: 2
Views: 2471

Re: Hull and Keel Protection

Saw a boat in Nova Scotia with a boat fender at least 4 foot long tied off horizontally to cleats at the bow and hanging just below his bow eye. As he approached the rocky shore he lengthened the lines until he rode up on it for a few feet. When beached the forward section of the hull was on top of ...
by conch
Sun Nov 13, 2016 8:36 am
Forum: REPAIRS and MODIFICATIONS
Topic: 15-footer locker lid and drain
Replies: 5
Views: 3566

Re: 15-footer locker lid and drain

The area for the lid on my 1983 15 Sport is recessed from the factory, I do not know about yours. The simple way to keep my original wood lid dry from rainwater if I left the plug in, was to add several small adhesive backed bumpers. The bumpers are about 3/8in tall. I chose to attach them to the hu...
by conch
Sun Oct 23, 2016 10:07 am
Forum: VHF MARINE RADIO
Topic: New DSC Recommendations
Replies: 14
Views: 29572

Re: New DSC Recommendations

[Changed topic to discuss the languages used in international regulations; this sidebar has not been archived in this thread because none of us are reading the proposed recommendations in ITU-R. M.493-14 in any language other than English.--jimh]
by conch
Sat Oct 22, 2016 6:13 pm
Forum: SMALL BOAT ELECTRICAL
Topic: The Best GNSS Receiver
Replies: 7
Views: 6408

Re: The Best GNSS Receiver

You can see the sights for aligning the antenna molded into the top cover in the picture. With high end transducers for sounders costing much more being sold and installed all the time, I do not think the price is out of line. This will be a welcome addition to those installing or improving their au...
by conch
Thu Oct 20, 2016 7:32 pm
Forum: VHF MARINE RADIO
Topic: New DSC Recommendations
Replies: 14
Views: 29572

Re: New DSC Recommendations

How are you parsing this sentence from the proposed language "In which case, the DSC equipment should automatically switch to the INTERNAL source if the external IEC 61162 position information is not valid or not available." I wonder if what was really intended was for a class D VHF to hav...
by conch
Thu Oct 20, 2016 6:25 pm
Forum: The GAM
Topic: Trailering with a manual transmission
Replies: 21
Views: 14963

Re: Trailering with a manual transmission

Having a "line lock" will release the brakes just as fast as your E-brake does now. Nothing gained with that. Any chance when you did your engine swap you used a light weight or aluminum flywheel? That would make your launch more difficult, also a solid center clutch disc without springs, ...
by conch
Thu Oct 20, 2016 12:52 pm
Forum: SMALL BOAT ELECTRICAL
Topic: Euro-style Terminal Strip
Replies: 8
Views: 6514

Re: Euro-style Terminal Strip

Yes, I think its makes the connection easier. I use them mounted in a dry enclosed location. Not convenient if you want to remove your device at the end of the day. They also can crush the 22 & 24 ga. wires so I support the wires close to the connector and check on them. I prefer ring terminals ...
by conch
Thu Oct 20, 2016 10:37 am
Forum: VHF MARINE RADIO
Topic: New DSC Recommendations
Replies: 14
Views: 29572

Re: New DSC Recommendations

I agree Standad-Horizon would have to include the antenna packaged along with the GX6000 to be compliant with the [M.493-14 recommendation]. The Garmin VHF radio can accept a GPS receiver directly without any additional network using the 19x HVS over NMEA-0183. The full comment submitted by Garmin w...
by conch
Thu Oct 20, 2016 9:27 am
Forum: The GAM
Topic: Trailering with a manual transmission
Replies: 21
Views: 14963

Re: Trailering with a manual transmission

I find that a rear wheel chock that has a short cord attached to the vehicle that will be dragged along as you exit the ramp helpful. Of most importance is a emergency brake system on the tow vehicle that really works. You must be confident that the emergency brake and chock will hold the load. If y...
by conch
Wed Oct 19, 2016 7:01 pm
Forum: The GAM
Topic: 1969 Classic 13 New Owner
Replies: 5
Views: 4620

1969 Classic 13 New Owner

WOW That 13 looks great, like a time capsule. A great find,and looks like no bottom paint. Check the trailer hubs and tires before that long haul home. The motor may be attached with screw clamps to the transom and not bolts, but it looks like there may be a transom saver to keep the screw clamps fr...
by conch
Wed Oct 19, 2016 11:35 am
Forum: VHF MARINE RADIO
Topic: New DSC Recommendations
Replies: 14
Views: 29572

Re: New DSC Recommendations

It seems the new rules regarding a mandated integrated GNSS make the SH GX6000 obsolete before it even is offered for sale. The Garmin argument asking to be allowed an external GPS receiver for their radios seem along the lines of the same reasoning used as best practice/location for the external AI...
by conch
Fri Oct 14, 2016 8:37 am
Forum: The GAM
Topic: Buying new trailer: Single v. Tandem
Replies: 16
Views: 11114

Re: Buying new trailer: Single v. Tandem

Check again with Continental about your towing weight. In Florida, towing a trailer that weights over 3,000-lbs requires brakes at each wheel. I assume you bought the tandem since you said "axles." To add [the required brakes] now [will be] really easy.
by conch
Thu Oct 13, 2016 4:49 pm
Forum: SMALL BOAT ELECTRICAL
Topic: Use of Voice Scramblers
Replies: 13
Views: 8111

Re: Use of Voice Scramblers

Staff counsel will be great Jim, it is really only the "You are not supposed to be LISTENING to them" sentence that I question regarding marine general public VHF radio. How do you know their traffic is over unless you monitor the channel before you key the microphone? I realize now I gave...
by conch
Thu Oct 13, 2016 4:27 pm
Forum: SMALL BOAT ELECTRICAL
Topic: Use of Voice Scramblers
Replies: 13
Views: 8111

Re: Use of Voice Scramblers

I was responding to this - You stated "All radio communications except distress alerts like a MAYDAY, a PAN-PAN announcement, or a SECURITY call are secret. You are not supposed to be listening to them." I do not believe this is correct today. Some presently sold VHF marine radios even inc...
by conch
Thu Oct 13, 2016 9:09 am
Forum: SMALL BOAT ELECTRICAL
Topic: Use of Voice Scramblers
Replies: 13
Views: 8111

Re: Use of Voice Scramblers

When I am trying to understand all these rules as a layman it seems "All radio communications except distress alerts like a MAYDAY, a PAN-PAN annoucenment, or a SECURITY call are secret. You are not supposed to be listening to them. If you happen to hear any radio communication you are BOUND BY...
by conch
Thu Oct 13, 2016 8:32 am
Forum: SMALL BOAT ELECTRICAL
Topic: Use of Voice Scramblers
Replies: 13
Views: 8111

Re: Use of Voice Scramblers

18 usc 2511 defines "readily accessible to the general public" as: (16) “readily accessible to the general public” means, with respect to a radio communication, that such communication is not— (A) scrambled or encrypted; (B) transmitted using modulation techniques whose essential parameter...
by conch
Thu Oct 13, 2016 8:20 am
Forum: SMALL BOAT ELECTRICAL
Topic: Use of Voice Scramblers
Replies: 13
Views: 8111

Re: Use of Voice Scramblers

I wonder if amended and supplemental revisions may have changed parts of the 1934 Act. 18 USC 2511 section (g) seems to do that, and notes to the section point to the communication being " readily accessible to the general public". (g) It shall not be unlawful under this chapter or chapter...
by conch
Sat Oct 01, 2016 11:40 am
Forum: MARKETPLACE
Topic: MFJ HF/VHF SWR ANALYZER MODEL MFJ-259B
Replies: 1
Views: 2351

Re: MFJ HF/VHF SWR ANALYZER MODEL MFJ-259B

October Bump
by conch
Sat Oct 01, 2016 11:38 am
Forum: MARKETPLACE
Topic: Garmin BlueChart g2 Vision Cape Cod
Replies: 1
Views: 2464

Re: Garmin BlueChart g2 Vision Cape Cod

October bump
by conch
Tue Sep 20, 2016 8:07 am
Forum: SMALL BOAT ELECTRICAL
Topic: NMEA-2000 Load Equivalency Number or LEN
Replies: 1
Views: 3368

Re: NMEA-2000 Load Equivalency Number or LEN

Some additional Garmin numbers are listed here

https://support.garmin.com/support/sear ... cale=en_US
by conch
Wed Sep 14, 2016 9:04 am
Forum: REPAIRS and MODIFICATIONS
Topic: 2010 E-TEC 225 Exhaust Overheat
Replies: 16
Views: 13805

Re: 2010 E-TEC 225 Exhaust Overheat

Evinrude might suggest you try their E-TEC Jet Drive in a V6 configuration for shallow and rocky water operation.
by conch
Tue Sep 13, 2016 9:58 am
Forum: SMALL BOAT ELECTRICAL
Topic: GPS with RTK for under 10cm accuracy
Replies: 2
Views: 3048

Re: GPS with RTK for under 10cm accuracy

Accuracy comes at a price. Starfire (John Deere) and OmniStar (Trimble) are subscription contracts with several levels of service down to 2.5cm if needed. OmniStar is global and would work on a vessel. Both systems correct for pitch,roll,and yaw. Free correction is available through NOAA, they colle...
by conch
Mon Sep 12, 2016 11:49 am
Forum: SMALL BOAT ELECTRICAL
Topic: GPS with RTK for under 10cm accuracy
Replies: 2
Views: 3048

GPS with RTK for under 10cm accuracy

For greater production in the field and precision leveling we use Starfire GNSS GPS-GIS with RTK sold by John Deere mounted on the hardtops of our John Deere 8295r tractors as you can see in the pictures. Auto steering, ground leveling, and specific application of fertilizer. That old International ...
by conch
Fri Sep 09, 2016 1:35 pm
Forum: SMALL BOAT ELECTRICAL
Topic: TowBoatUS Local Provider Has No MMSI
Replies: 2
Views: 3136

TowBoatUS Local Provider Has No MMSI

I was adding MMSI numbers to my DSC call list and thought it would be a good idea to add my local TowBoatUS provider. I called and was told they did not have a MMSI number. I was a bit surprised and called BoatUS. I was connected to the MMSI numbering section. That fellow suggested I use a cellphone...
by conch
Sun Sep 04, 2016 3:39 pm
Forum: MARKETPLACE
Topic: Garmin BlueChart g2 Vision Cape Cod
Replies: 1
Views: 2464

Garmin BlueChart g2 Vision Cape Cod

Garmin BlueChart g2 Vision Cape Cod Data Card for sale $80.00
VUS003R
FEB 2012
010-C0704-00
E-mail clv149pdo@aol.com
Thanks Chuck
Cape Cod back.JPG
Cape Cod back.JPG (41.18 KiB) Viewed 2464 times
Cape Cod.jpg
Cape Cod.jpg (154.09 KiB) Viewed 2464 times
by conch
Fri Aug 19, 2016 7:52 am
Forum: REPAIRS and MODIFICATIONS
Topic: Hinging tackle station on 27 Offshore
Replies: 9
Views: 5685

Re: Hinging tackle station on 27 Offshore

[Below is a link to a] picture for the installed hatch. The poster was Macdougall70 and his name is Rob.The picture is in an album at Photobucket.

http://s153.photobucket.com/user/macdou ... 3.jpg.html

Thanks Chuck
by conch
Fri Aug 19, 2016 7:33 am
Forum: REPAIRS and MODIFICATIONS
Topic: Hinging tackle station on 27 Offshore
Replies: 9
Views: 5685

Re: Hinging tackle station on 27 Offshore

Don the backrest area of the rear facing fold down seat is the outer wall for the deep double sinks in the tackle center. There is a picture in the old CW of the hatch installed below the fold down seat. I asked about it at the time but I cannot find it now.
Chuck
by conch
Thu Aug 18, 2016 2:47 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Hinging tackle station on 27 Offshore
Replies: 9
Views: 5685

Re: Hinging tackle station on 27 Offshore

Another option is to install an additional large horizontally hinged opening hatch below the rear facing fold down seat. You would have to remount the items you have in that area for the hatch cutout.This would be below the sinks bottom and above the screw line seam. Do you have the upper station? M...
by conch
Mon Aug 08, 2016 6:24 pm
Forum: MARKETPLACE
Topic: MFJ HF/VHF SWR ANALYZER MODEL MFJ-259B
Replies: 1
Views: 2351

MFJ HF/VHF SWR ANALYZER MODEL MFJ-259B

After clearing my Dad's test bench, I have a MFJ HF/VHF SWR ANALYZER MODEL MFJ-259B for sale. It is in a soft sided carry case with shoulder strap. Included is a 110v to 12vDC power supply in addition to the internal batteries. The meter appears as new. Software is version 3.35. Asking $200.00 OBO C...
by conch
Mon Aug 08, 2016 8:35 am
Forum: PERFORMANCE
Topic: 1995 Outrage 21 Re-power Yamaha 350
Replies: 6
Views: 6593

Re: 1995 Outrage 21 Re-power Yamaha 350

The F350 V8 was also offered at a 300hp version for a few years.
Chuck
by conch
Mon Aug 08, 2016 8:14 am
Forum: MARKETPLACE
Topic: 27 Guardian For Sale *Sold*
Replies: 15
Views: 11000

Re: 27 Guardian For Sale

Please send pictures to to my E-mail at clv149pdo@aol.com
Thanks
Chuck
by conch
Sun Jun 12, 2016 1:56 pm
Forum: REPAIRS and MODIFICATIONS
Topic: Trailer Tire and Wheels
Replies: 5
Views: 4378

ST tires

I think the ST tires are made for trailers vs the LT tires for trucks. Best prices I have found without tax and free shipping at trailertiresandwheels in Ohio.
by conch
Wed Apr 13, 2016 7:36 am
Forum: REPAIRS and MODIFICATIONS
Topic: 1986 Evinrude 150
Replies: 3
Views: 3072

Re: 1986 Evinrude 150

After three decades and a rebuild there is a chance that the motor no longer has its VRO system still in use. That is something I would confirm. You might want to rent a boat first at the lake to see what is popular there and how a modern outboard sounds and performs for comparison to boats you are ...
by conch
Sat Apr 09, 2016 12:36 pm
Forum: SMALL BOAT ELECTRICAL
Topic: Lowrance HDS Gen3: Installation, Interfacing Tips, and Use
Replies: 115
Views: 159469

Re: Lowrance HDS Gen3: Installation, Interfacing Tips, and Use

I expect to see AIS information across 3 Garmin MFDs using NMEA 0183 when I finish installing a Standard Horizon GX2200. The data is shared over the Garmin Marine Network to other connected chartplotters according to Garmins installation instructions. They note that all NMEA 0183 devices must be wir...
by conch
Sat Apr 09, 2016 11:50 am
Forum: SMALL BOAT ELECTRICAL
Topic: NMEA-2000 Network Terminators
Replies: 13
Views: 19389

Re: NMEA-2000 Network Terminators

Actually Duane, since this is for your boat, why not add a Lowrance Link 8 radio and fill that NMEA-2000 network backbone port. Problem solved.
Chuck
by conch
Sat Apr 09, 2016 11:16 am
Forum: SMALL BOAT ELECTRICAL
Topic: NMEA-2000 Network Terminators
Replies: 13
Views: 19389

Re: NMEA-2000 Network Terminators

Yes that shipping would be high. Probably best to include them with the initial purchase of a 4 port T. They are also on E-Bay with free shipping. I would prefer a threaded cap to using tape on a port. as access to half my T's are in a closed overhead electronics box with flush mounted MFD's ,VHF, a...
by conch
Sat Apr 09, 2016 10:21 am
Forum: SMALL BOAT ELECTRICAL
Topic: NMEA-2000 Network Terminators
Replies: 13
Views: 19389

Re: NMEA-2000 Network Terminators

Star Marine Depot lists Maretron NMEA-2000 connector caps. Part # M000101 Female and Part# M000102 Male at their online store.
by conch
Sat Apr 09, 2016 9:55 am
Forum: SMALL BOAT ELECTRICAL
Topic: NMEA-2000 Network Terminators
Replies: 13
Views: 19389

Re: NMEA-2000 Networks

This is from some Lowrance NMEA-2000 General Information: NOTE: If you have a double -T-connector on your network that is not attached to a device, you must cap the unused connector with a NMEA 2000 cap. This will protect the pin connectors from corrosion. The NMEA 2000 cap looks like a terminator, ...
by conch
Mon Apr 04, 2016 8:35 am
Forum: SMALL BOAT ELECTRICAL
Topic: Running wires below deck and through T-Tops
Replies: 4
Views: 4736

Re: Running wires below deck and through T-Tops

I really like the magnet idea,thanks for sharing that. Instead of the Klein fish rods I like to use Sling Chair Spline as it can turn a tight radius. Using spline sold by Sailrite.com I can leave behind a pullstring as it is hollow, or I leave an exposed loop in the string extending from the hollow ...
by conch
Sun Apr 03, 2016 10:15 am
Forum: VHF MARINE RADIO
Topic: Maritime Mobile Service Identity or MMSI
Replies: 22
Views: 21645

Re: Maritime Mobile Service Identity or MMSI

It sure does seem confusing for VHF DSC GPS equipped handhelds. "If you use a handheld with more than one boat, get the handheld its own MMSI from BoatUS or other private issuing agencies." When applying for the MMSI on the BoatUS site there are mandatory fields to complete for vessel regi...
by conch
Thu Mar 10, 2016 6:36 am
Forum: SMALL BOAT ELECTRICAL
Topic: Custom Radar Mount
Replies: 3
Views: 4184

Re: Custom Radar Mount

The clamp is for the light pole and it can be lowered for bridge clearance if needed. The white light pole is included.
Chuck
by conch
Wed Mar 09, 2016 12:56 pm
Forum: SMALL BOAT ELECTRICAL
Topic: Custom Radar Mount
Replies: 3
Views: 4184

Custom Radar Mount

I decided to replace my old Furuno 1621 Mark-2 radar with a Garmin 24xHD. I soon realized that the mounting holes were different. I did not want four new holes in the hardtop, so that meant I needed a custom mount. The new radar dome would also interfere with the existing all-round white lamp, the G...