ICON Gauges for E-TEC

Information about Evinrude I-Command, ICON Pro, and ICON Touch Color Displays
jimh
Posts: 5091
Joined: Fri Oct 09, 2015 12:25 pm
Location: Michigan, Lower Peninsula
Contact:

ICON Gauges for E-TEC

Postby jimh » Sat Oct 14, 2017 10:35 am

There is a very comprehensive reveiw of ICON Pro gauges and ICON Basic gauges for use with the E-TEC available at

ICON Gauges for E-TEC
http://continuouswave.com/whaler/reference/ICONgauges.html

The menu structure of the ICON Pro RPM gauge is mapped in an article at

Evinrude ICON Pro RPM Gauge User Interface
http://continuouswave.com/whaler/reference/ICON_Menu.html

Installation Instructions for ICON Pro gauges can be found at

Evinrude E-TEC ICON Gauge Installation
http://www.operatorsguides.brp.com/OperatorsGuidesAttachments/OwnersManuals_EJ/attach/Accessories/356351%20EN.pdf

Operating Instructions for ICON Pro gauges can be found at

Evinrude E-TEC ICON Pro Series Gauge User's Guide
http://www.operatorsguides.brp.com/OperatorsGuidesAttachments/OwnersManuals_EJ/attach/Accessories/766075%20EN.pdf

NMEA-2000 Instrumentation for Modern Outboard Engines explains the basics of NMEA-2000 network construction, which will be necessary for use of ICON gauges, discusses network power options, illustrates the location of the NMEA-2000 connector on E-TEC engines, discusses special functions of Evinrude-branded gauges, and compares ICON and I-Command gauges.

NMEA-2000 Instrumentation for Modern Outboard Engines
http://continuouswave.com/whaler/reference/NMEA2000.html