Steering Wheel Center Cap
-
- Posts: 8
- Joined: Tue Aug 02, 2016 1:35 pm
Steering Wheel Center Cap
Earlier this summer when I got my boat, the cap [on the centre of the steering wheel] was missing. I am an amateur woodworker with a lathe, and I decided to make a new one out of wood. Then a friend engraved the logo and colored it in for me. So far, it only has one coat of varnish but will have several more before installing. I am really happy with how it turned out.
- Attachments
-
- finished cap.jpg (59.05 KiB) Viewed 6502 times
Re: Steering Wheel Center Cap
admirable. Mine is missing and from what I recall wasn't as nice. The Whaler logo is a nice touch. I'd buy one like that in a heartbeat.
Re: Steering Wheel Center Cap
I would too.
1978 Outrage V20 with 2004 Suzuki DF-115. 1992 23 Walkaround with two 2010 Yamaha F-150s.
Re: Steering Wheel Center Cap
How about $15.00 Shipped and I will do the varnish
Re: Steering Wheel Center Cap
Bring it on. The center on our Sport 13 just fell out while the boat was being trailered. Found it in the rear sump in good condition. All it needs is a little clean up and maybe a coat or two of varnish. But, it lacks the logo.
BTW, it looks like the only way to attach it to the wheel is via adhesive??
BTW, it looks like the only way to attach it to the wheel is via adhesive??
Butch
-
- Posts: 91
- Joined: Sun Oct 18, 2015 9:26 pm
- Location: Texas, Hill Country
Re: Steering Wheel Center Cap
There is a set screw in the rim of the steering wheel that clamps onto the tenon on the back of the cap.