Replacement Value of Restored 1995 Sentry 19
Posted: Tue Aug 01, 2017 11:01 am
For insurance purposes I am trying to get an idea of the replacement value for the 1995 19 Sentry that has been restored. There are not very many Sentry models out there but would like to get an idea of what y'all think. Here is the list of items on the boat:
Motorguide Xi5 24V bow mounted trolling motor
Furuno GP1870F fishfinder/charplotter with Airmar P66 transducer
Mercury 150 Optimax, 2006 (~1200 hours) with gen II cables and binnacle
Mercury 9.9 kicker 2002 year
Dualpro Professional series onboard charger (3 bank)
VHF radio
Hydraulic steering
automatic bilge pump
all new through-hulls
led nav lights
bocatech flush mount switches
new seats
ez-loader trailer with ez lube style spindles for quick grease maintenance
custom stainless oil reservoir and stainless battery trays
new rub rail
two big-jon 48" manual downriggers
Work done:
Coosa Board restored transom
new 55 gallon fuel tank with reed style sender
deck hatch underside re-fiberglassed and all screw holes sealed
all fiberglass nicks and dings and cracks properly fixed
new paint and floor non-skid
new trailer hubs, bearings, brakes, lights and wiring
internal foam checked throughout hull
custom built stainless steel seat mounts that fit on aluminum pedestal mounts
Attached are a few pics and there is still a few things left to do but hopefully y'all will get the idea. Thank you,
Motorguide Xi5 24V bow mounted trolling motor
Furuno GP1870F fishfinder/charplotter with Airmar P66 transducer
Mercury 150 Optimax, 2006 (~1200 hours) with gen II cables and binnacle
Mercury 9.9 kicker 2002 year
Dualpro Professional series onboard charger (3 bank)
VHF radio
Hydraulic steering
automatic bilge pump
all new through-hulls
led nav lights
bocatech flush mount switches
new seats
ez-loader trailer with ez lube style spindles for quick grease maintenance
custom stainless oil reservoir and stainless battery trays
new rub rail
two big-jon 48" manual downriggers
Work done:
Coosa Board restored transom
new 55 gallon fuel tank with reed style sender
deck hatch underside re-fiberglassed and all screw holes sealed
all fiberglass nicks and dings and cracks properly fixed
new paint and floor non-skid
new trailer hubs, bearings, brakes, lights and wiring
internal foam checked throughout hull
custom built stainless steel seat mounts that fit on aluminum pedestal mounts
Attached are a few pics and there is still a few things left to do but hopefully y'all will get the idea. Thank you,