Hello fellow BW fans. I live in Australia where we are supposed to worship our local Haines Hunter brand (and I do have a couple of these), however I have picked the forbidden fruit and now have two BW's.
The first one is simple - a 2005 Model 205 Eastport with a 200 Opti, trim tabs, BMS hyd jacking plate, 18p 4 blade, 45 knots (GPS) at 5300rpm.
The next is a mystery as I purchased it 2nd hand with twin 150hp Yamaha 2-strokes. It is registered here as a 1997 23' Outrage - however looking at heaps of photos on the web it appears more like a 25' Guardian as it has the same bull nose and it also has a port side dive door.
It has the following serial number -
BWC5J373B797
It also has the letters -
WB
Below the serial number.
If anyone could shed any light it would be greatly appreciated ???
She rides magnificently and leaves my Eastport for dead in ride department !
What have I purchased?
-
- Posts: 4
- Joined: Tue Sep 26, 2017 6:03 am
What have I purchased?
Just a lucky Aussie
Re: What have I purchased?
She is a Guardian based on the console style and rails.
The Guardian hull is the same form as the Outrage but the deck/fuel cover may be different (metal) with large metal inspection ports. The console and seating options and hardward are also different.
The Outrage/Guardian had an LOA of 24' 7" and a beam of 8' 0"
The Outrage/Guardian 22 had an LOA of 22' 2" and a beam of 7' 5"
The Guardian hull is the same form as the Outrage but the deck/fuel cover may be different (metal) with large metal inspection ports. The console and seating options and hardward are also different.
The Outrage/Guardian had an LOA of 24' 7" and a beam of 8' 0"
The Outrage/Guardian 22 had an LOA of 22' 2" and a beam of 7' 5"
1992 Outrage 17
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
-
- Posts: 4
- Joined: Tue Sep 26, 2017 6:03 am
Re: What have I purchased?
Hello Phil,
thanks for the quick response. It is 10:30pm here right now - so I will be out with the tape measure first thing in the morning to check the beam - which should be the easiest measurement.
What model of the Outrage/Guardian had the 24' 7" and 8' 0" measurements? Was it a ( 25 ) ?
thanks for the quick response. It is 10:30pm here right now - so I will be out with the tape measure first thing in the morning to check the beam - which should be the easiest measurement.
What model of the Outrage/Guardian had the 24' 7" and 8' 0" measurements? Was it a ( 25 ) ?
Just a lucky Aussie
Re: What have I purchased?
The 25 has the LOA of 24' 7"
Show us a photo of the floor and console to be 100% sure.
And it's tomorrow there mate!
(My sister lives in Sydney)
Show us a photo of the floor and console to be 100% sure.
And it's tomorrow there mate!
(My sister lives in Sydney)
1992 Outrage 17
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
-
- Posts: 4
- Joined: Tue Sep 26, 2017 6:03 am
Re: What have I purchased?
Definately a Guardian.
Looks in really good shape. Most commercial boats are trashed when they are sold to the public.
The T-Top is especially interesting. Never seen a leg design like that.
The letters "WB" on the HIN could refer to Work Boat.
Looks in really good shape. Most commercial boats are trashed when they are sold to the public.
The T-Top is especially interesting. Never seen a leg design like that.
The letters "WB" on the HIN could refer to Work Boat.
1992 Outrage 17
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
-
- Posts: 4
- Joined: Tue Sep 26, 2017 6:03 am
Re: What have I purchased?
Great! Thanks again, Phil.
I have already got rid of the homemade tailer that it was on and so she now sits on a full aluminium one. Next will be a complete tidy up of the gel coat, interior, wiring, and a new leaning post and rear flip up seat. She will also get a custom aluminium tee top (need to get out of the sun as much as possible here). The old Yamaha engines still go strong, but I want to ditch them. I am hesitating between re-powering with either twin 150 or 175-HP OptiMax engines or a single 300 to 350 Verado.
I have already got rid of the homemade tailer that it was on and so she now sits on a full aluminium one. Next will be a complete tidy up of the gel coat, interior, wiring, and a new leaning post and rear flip up seat. She will also get a custom aluminium tee top (need to get out of the sun as much as possible here). The old Yamaha engines still go strong, but I want to ditch them. I am hesitating between re-powering with either twin 150 or 175-HP OptiMax engines or a single 300 to 350 Verado.
Just a lucky Aussie
Re: What have I purchased?
Compare with the GUARDIAN 22 seen in CETACEA Page 12:
http://continuouswave.com/whaler/cetacea/cetaceaPage12.html
The large forward hatch cover is seen; this is a general tip off of commercial construction of a Boston Whaler boat.
http://continuouswave.com/whaler/cetacea/cetaceaPage12.html
The large forward hatch cover is seen; this is a general tip off of commercial construction of a Boston Whaler boat.
Re: What have I purchased?
You can no longer get a 150-HP or 175-HP OptiMax engine, at least not in the USA. The OptiMax is now only made in the larger displacement series and offered only at 200 or 250-HP. See
https://www.mercurymarine.com/en/us/engines/outboard/optimaxr/30l-200-250-hp/#specifications
If you want a two-stroke-power-cycle engine from Mercury at 150-HP to 175-HP, you will have to get a ProXS model. The ProXS models seem to be a new model using the Orbital Combustion Process (also used in OptiMax) but tuned or enhanced for really high-speed and light weight fishing boats. See
https://www.mercurymarine.com/en/us/engines/outboard/pro-xs/150-175-pro-xs/
https://www.mercurymarine.com/en/us/engines/outboard/optimaxr/30l-200-250-hp/#specifications
If you want a two-stroke-power-cycle engine from Mercury at 150-HP to 175-HP, you will have to get a ProXS model. The ProXS models seem to be a new model using the Orbital Combustion Process (also used in OptiMax) but tuned or enhanced for really high-speed and light weight fishing boats. See
https://www.mercurymarine.com/en/us/engines/outboard/pro-xs/150-175-pro-xs/
Re: What have I purchased?
While Jim is correct for the US, Mercury is showing the same for Australia too.
From Mercury's Australia website: https://www.mercurymarine.com/en/au/engines/outboard/optimax-and-pro-xs/
From Mercury's Australia website: https://www.mercurymarine.com/en/au/engines/outboard/optimax-and-pro-xs/
1992 Outrage 17
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003