Console Teak for OUTRAGE 22

A conversation among Whalers
User avatar
Parker Yacht
Posts: 11
Joined: Tue Nov 27, 2018 6:40 am

Console Teak for OUTRAGE 22

Postby Parker Yacht » Wed Nov 28, 2018 9:40 am

Hello all. I am new to the Forum and looking for a bit of info if I might.

We are are repair and restore facility in Ft Lauderdale that repairs and restores classic boats, like Bertram, SeaCraft, Mako, etc. I've done a couple of 15-foot Boston Whaler boats. Now a customer has entrusted us to do a 1989 Outrage 22.

I am trying to source the teak pieces for the console. We can refinish some of what he has, but on some it would be cheaper to buy new than it would be for us to fabricate.

Specialty doesn't have them and neither does Blackduck.

Any suggestions?

Regards,
Ole Parker
Parkeryacht.com
Regards,
Ole
954 463 1515
oparker@parkeryacht.com

jimh
Posts: 11710
Joined: Fri Oct 09, 2015 12:25 pm
Location: Michigan, Lower Peninsula
Contact:

Re: Console Teak for OUTRAGE 22

Postby jimh » Wed Nov 28, 2018 9:58 am

Over the years there have been several cottage-industry suppliers of replacement teak parts, but most have left that marketplace. At the moment, Black Duck Gallery is the only recommended supplier. See

http://continuouswave.com/whaler/refere ... .html#wood

It would be quite unusual to find alternate vendors with off-the-shelf parts in stock. If you have the original wooden component, fabricating a duplicate yourself is probably the most expedient solution.

User avatar
Parker Yacht
Posts: 11
Joined: Tue Nov 27, 2018 6:40 am

Re: Console Teak for OUTRAGE 22

Postby Parker Yacht » Wed Nov 28, 2018 12:13 pm

Thank you for the reply, maybe that will end up being the case. :-(
Regards,
Ole
954 463 1515
oparker@parkeryacht.com