CONTINUOUSWAVE

Cleaning up my boat garage for the winter and have some Whaler parts to part with:

Early 80's Montauk fiberglass console, good condition with both teak doors, windshield and shepherd's Crook console rail - $800
Extra Shepards Crook console rail - $200
Set of 17' side rails - $150
Outrigger console bracket that mounts on Shepards Crook rail - $250
Set of Z legs - $150
Wood seat back from older RPS - $200
Bow rail from Montauk in sections - complete except just missing the small 2' upright piece in front ( easy to replace) - $200
Tall stainless steel stern light - $100
Stainless steel Stern cross bar for 18' Outrage with stern seat support brackets - $150
Blue Mills Montauk mooring cover with gunwale clips (fits inside bow rail) - $250
Mid 80's Suzuki 6 hp long shaft outboard (needs carb cleaned but runs) - $450

All items located in eastern PA. Can ship most at your expense or you can pick up if somewhat local.
Brian

Forgot to list - I also have a Mills bow shelter from an early 80's Montauk in good condition- $300

Brian

Brian,

You have mail!

Tom

The Montauk console, outrigger base and mooring cover are gone. Bow shelter may be as well.
I also have a nice set of wood cooler chocks - $100
The fiberglass cutting board with two Lee rod holders that mounts in the stern of the late 90's 17' Outrage - $250.
Very nice heavy duty Pacific Blue cover for a 15' Dauntless - $250.
Full T-top with Navy Blue canvas and 1" stainless steel rails with mounting hardware (in sections) - $350.
All are in good condition. Will list more items as I sift through the garage ...
Brian

Do you still have the Z-Legs?

Do you have the Stainless Swing arms too?

Brian are the cooler cleats and side rails still available.
Thanks

Necka,
Yes, the cooler cleats and side rails are both still available. I sent you an email with my contact information.

Thanks, Brian

Can you email me pics of the Tall stern light?

Jmetaxas@aol.com

Update on parts:

AvIlable - bow rail, wood RPS backrest, Z legs, tall stern light (58"), small stern light for Outrage (38") bow shelter ( not mills but nice with 2 top panels to attach to a Bimini top)?

Stern Cutting board with 2 Lee rod holders and stainless steel mount- $250

Also have: Outrage bow cushion (brand new desert tan with snaps - $150),

Very nice 15 Dauntless heavy duty full cover (navy blue) - $200

Outrage cooler chocks (varnished) - $100

Nice 2003 Honda 50 hp 4 stroke tiller outboard with power tilt ( ~ 500 hrs +) - $2500/bo.

Still sifting through garage ...

Hi Brian
Do you have pictures of the bow shelter, you can send info via email. I have a 1979 Newport 17, it has the front bows for a bow shelter, but there was no canvas on them when I purchased the boat
Thanks
Marc

Marc-B just an FYI the forward shelter from a Montauk is very different than that on a Newport. The two are not interchangeable

Ok thanks
Marc

brian - i am interested in the z-legs and the rps backrest. do you happen to have the stainless pieces that connect the z-legs to the backrest?
sean

My Mid 70-80's Montauk fiberglass console, in good condition with both teak doors, windshield and shepherd's Crook console rail is available. I was holding it for a member here but they ended up not needing it. These are hard to find - $800

Bow shelter also still available - $300

Brian,
You have mail on the tall stern light.

Thanks.

David

Can you give us an update on what is still available?

Parts Update: Most of the rails are still available
bow rail - $200
Side rails - $150
Console rail with Shepard's Crook - $150
18 Outrage rear stern rail - $150
Tall stern light - $100
Outrage mahogany cooler chocks - $100
T-top (1" SS rails) for Montauk/Dauntless/Outrage - $300
15 Dauntless custom cover - $200
Console was sold but may still be available - $750
Can ship most of these by UPS ground

Brian

Brian,
I'm still interested in the tall stern light that is listed above as being available.

The earlier email I sent to you at the address shown in your profile has been followed up with another. If you are not receiving them, please post back here to let me know.

Thanks.

David

David,
I received your email and sent you a reply with pictures. The stern light is still available.

Thanks,
Brian

Update on available parts:

Forward shelter for Nauset/Montauk is in nice condition - good frame, canvas, plastic & side panels ( 2 slightly yellow) -$300
T-top with 1" stainless poles and pacific blue canvas (in sections) - very good condition- $300
15 Dauntless heavy duty custom cover - $200
Bow rail - $200
Another set of Stainless steel 17' side rails -$150
Rear bait board with 2 flush rod holders and mount for Outrage - $250
Outrage cooler chocks - $100
Tall stern light - $100



Most items can be shipped UPS ground or picked up in Southeast PA or Central NJ.

Good Evening Brian,

Would like the bow rail and set of side rails if available.

Thanks in advance,

Lance

Do you have any wooden panels for a 17MTK still available?

I don't have any wood panels. Here's an update on what Whaler parts are left and still available:

Bow Shelter with side panels ( picture below) - $300
Nice Pacific Blue T top with 1" stainless frame - $300
Stern Bait board from Outrage with twin Lee rod holders and mount - $250
Mahogany Outrage cooler chocks - $100
Tall Montauk stern light - $100
Outrage stern light - $100
New Outrage bow cushion - $150

All items available for pickup in Southeast PA or Edison, NJ or can be shipped at buyers expense.
Brian

I know this is an old post but do you still have the t-top or canvas available?
Thanks

Interested in 17 Outrage bow cushion and the piece that had the cutting board and rod holders that attached to the stern. Could you please send pictures to 801-842-6689 or email: mikecodi1202@yahoo.com. Thanks

Fellas--the seller posted his notice about 18-months ago. I doubt he is still checking this thread. I recommend you contact him directly to make further inquiries.

That was the worst part seriously when that parts is available for sale Legal Steroids

Yes, I still have the T top, bow shelter, Outrage bow cushion and the stern cutting board with rod holders available. You can cIntact me directly at bkovak@comcast.net

Thanks,
Brian

email sent this morning....

Email sent regarding the T-Top.

Email sent for Dauntless cover

Brian ,I contacted you through e-mail
I am looking for replacement parts for a 18 outrage - mid 80’s
Thanks EZ- DUZIT