Outrage 18 Fiberglass Gunwales
Outrage 18 Fiberglass Gunwales
Hello, I have a 1989 Outrage 18 and I am looking to replace the teak covering boards with fiberglass ones. The teak boards are in very good shape and are available for trade if interested. I am also looking for a new fuel tank, rub rail kit and bow cleat. Point Pleasant, New Jersey - Joedmorris@edgewoodproperties.com
Re: Outrage 18 Fiberglass Gunwales
Gunwale covers - I recall reading there was a vendor who did a mold for the gunwale covers. I think it was Orlando's in Texas?
The OEM fuel tank and rub rail are still available.
Contact FMT Marine - http://floridamarinetanks.com
Rub rail - Contact your local dealer, Sue @ Twin Cities Marine (http://www.beacontcm.com] or
Barbour Plastics (Rigid is #R1313, insert is #F850) https://www.integritymarinecorp.com/product-page/r1313-f850-rigid-rubrail-with-flexible-insert
The Sampson post is out of production.
The OEM fuel tank and rub rail are still available.
Contact FMT Marine - http://floridamarinetanks.com
Rub rail - Contact your local dealer, Sue @ Twin Cities Marine (http://www.beacontcm.com] or
Barbour Plastics (Rigid is #R1313, insert is #F850) https://www.integritymarinecorp.com/product-page/r1313-f850-rigid-rubrail-with-flexible-insert
The Sampson post is out of production.
1992 Outrage 17
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
Re: Outrage 18 Fiberglass Gunwales
After reviewing the archives, you may want to consider replacing just the wood with starboard like material.
It could be a DIY and significantly cheaper.
http://continuouswave.com/ubb/Forum3/HTML/001536.html
It could be a DIY and significantly cheaper.
http://continuouswave.com/ubb/Forum3/HTML/001536.html
1992 Outrage 17
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003