Page 1 of 1

FS: 1966 Nauset w/1967 Kiekhaefer Mercury 1100 - $24,000 in NJ

Posted: Sun May 10, 2020 9:13 am
by Ourturn_1
Complete Restoration of a vintage 1966 Boston Whaler Nauset
IMG_0105.jpeg
IMG_0105.jpeg (162.06 KiB) Viewed 4558 times

Powered by a fully restored 1967 Kiekhaefer Mercury 1100 (110 hp) outboard w/ Thunderbolt Ignition.

New Mahogany console with front seat

New mahogany pilot seat

Custom seat cushions with original "Boston Whaler" logo on pilot seat

Complete restoration of Paint

New Rub Rail

Moeller, 22 Gallon PL3 Topside Fuel Tank

Swim Platform w/ladder

All New Wiring

New Stainless Steel Railings

Custom Fabricated Travel Cover, Top Gun Fabric

2007 Karavan Galv Trailer w/ New Disc surge brakes & LED lights

Clear Title for boat

Engine Restoration:

 Mechanical restoration process.

All items are removed from the power head. The power head is dismantled and internal parts are inspected. Necessary parts are replaced or serviced as needed. The block will be serviced as necessary. Carburetors are dismantled and soaked for cleaning and reassembled with the use of new gaskets, seals, and needles & seats. New fuel hoses installed. Distributor over-hauled and re-wired, or serviced depending on what type of distributor and year of the motor. New spark plug wires, ends, and boots are installed. Fuel pumps are serviced with new gaskets, diaphragm's, and valves. Main wiring harness is repaired or replaced depending on its condition. New gaskets are used in re-assembly of the powerhead. The motor is then timed and tuned.  Lower unit is completely dismantled, all parts are checked and replaced if necessary. A complete re-seal kit is used in the re-assembly process.

Paint restoration process. 

In order to refinish the motor properly a full dis-assembly is necessary. Power head is removed. Center section is then separated from the lower unit, swivel assembly. All parts are either sand-blasted or sanded clean, depending on condition of the parts.  All parts are primer coated in a urethane based two-part epoxy primer. The primer is then wet sanded flat and prepared for paint. All parts are base coated in the specified color, and then clear coated in a urethane top coat. The paint is then wet sanded and buffed for a perfect finish.

For sale $24,000.00

Located in Egg Harbor, New Jersey

Contact

ourturn_1@hotmail.com

609-513-3732

Re: FS: 1966 Nauset w/1967 Kiekhaefer Mercury 1100 - $24,000 in NJ

Posted: Mon May 11, 2020 2:06 pm
by Phil T
Please clarify.

Complete restoration of Paint


The factory finish is gelcoat. Is the boat painted?

Re: FS: 1966 Nauset w/1967 Kiekhaefer Mercury 1100 - $24,000 in NJ

Posted: Mon May 11, 2020 4:24 pm
by Ourturn_1
Yes, we chose to repaint to match original colors. We opened the deck to check the core, which we found in good condition.

Re: FS: 1966 Nauset w/1967 Kiekhaefer Mercury 1100 - $24,000 in NJ

Posted: Sun May 31, 2020 10:20 am
by Ourturn_1
Price reduced to $22,000.00 or best offer.

Re: FS: 1966 Nauset w/1967 Kiekhaefer Mercury 1100 - $24,000 in NJ

Posted: Mon Jun 01, 2020 10:31 am
by biggiefl
Your stern lifting eyes are upside down...fyi.

Re: FS: 1966 Nauset w/1967 Kiekhaefer Mercury 1100 - $24,000 in NJ

Posted: Tue Jun 30, 2020 8:49 am
by Ourturn_1
Good catch thanks! eyes corrected.

Splashed the boat, running great.

Re: FS: 1966 Nauset w/1967 Kiekhaefer Mercury 1100 - $24,000 in NJ

Posted: Mon Aug 03, 2020 8:28 am
by Ourturn_1
looking for a good home for my Whaler, Price reduced to $21,000 or best offer

Re: FS: 1966 Nauset w/1967 Kiekhaefer Mercury 1100 - $24,000 in NJ

Posted: Tue Sep 29, 2020 11:31 am
by Ourturn_1
Lowered sale price to $19,500 OBO