Hi All. I am looking for the dimensions or an official drawing of a 140-gallon fuel tank as used in the classic 25-foot hull in Outrage, Revenge, and Challenger models. The drawing needs enough detail to permit having one built locally. I hope I am not the first guy to try this.
I have measured the one I removed but the tank fabricator asked me some things I had not considered, e.g., is the tank's keel centered?
Maybe I am worrying too much.
Pete.
Classic 25-foot Hull; Tank Dimensions; 140-gallon
Re: Classic 25-foot Hull; Tank Dimensions; 140-gallon
When I replaced the boat's fuel tank last winter, I first pulled the old tank from my Outrage 25 and gave it to a local fabricator to copy. Why not do the same in your case?
Stephen
Stephen
Re: Classic 25-foot Hull; Tank Dimensions; 140-gallon
Hi Stephen. Two highly-recommended replacement fuel tank [fabricators] are in Los Angeles and San Diego. I offered to ship [the original fuel tank to] them, but they thought careful measuring would work just as well. Even if I ship [the original fuel tank to] them, the cost in total [of locally fabricating a replacement fuel tank] will be less than the [cost of buying a replacement fuel tank from] Florida.
My hope was that the brain trust would have the official document around to validate my measurements.
My hope was that the brain trust would have the official document around to validate my measurements.