17 Montauk Hand Rails
17 Montauk Hand Rails
Hi all, I have a 1995 Montauk that i Just remover the bow rail on. When i remover it the top supports seam to not be screwed into anything. They were just silicone in :-(. Now I just have a bunch of holes about the size of an pencil eraser. Is there suppose to be anything in the holes?? If so what and where can i get replacements?? Thank You
1995 Montauk 1995 Merc 90. Port Jefferson and Greenport NY
Re: 17 Montauk Hand Rails
If you will reinstall the rail or sell the boat in the next 5 years, reinstall the screws with a good bead of polysulfide based sealant (not adhesive). Otherwise get some color matched patch kit from spectrum and seal the holes.
http://www.spectrumcolor.com/ProductDesc.aspx?code=F552208K&type=4&eq=&desc=BOSTON-WHALER-WHITE-94-96&key=it
http://www.spectrumcolor.com/ProductDesc.aspx?code=F552208K&type=4&eq=&desc=BOSTON-WHALER-WHITE-94-96&key=it
1992 Outrage 17
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
Re: 17 Montauk Hand Rails
Thank you for the response. I find it hard to believe that there is not suppose to be something in these holes. They are all about the same size and all exactly the same screws cam out, however they were not screwed into anything.
1995 Montauk 1995 Merc 90. Port Jefferson and Greenport NY