Montauk Console Mounting
Posted: Wed May 16, 2018 6:30 am
I will be remounting my console to the deck of my Montauk this weekend, I was planning on using number 12 x 1-inch screws to mount the angle bracket to the deck with five on each side.
Are more fixings or longer larger screw needed?
I don't want the console pulling out from the deck, but equally I don't want to drill more or larger holes than needed.
Are more fixings or longer larger screw needed?
I don't want the console pulling out from the deck, but equally I don't want to drill more or larger holes than needed.