1999 17 Outrage hatch pull

[idylmoments]

I purchased a 1999 17 Outrage and it's missing the hatch pull on the in floor storage locker behind the pilot's seat. There is a 2-3/8-inch diameter hole and some remnant of caulk on a square outline. No screw holes. I have looked at the parts list and drawing on the Boston Whaler website---and nothing.

Point me in the right direction. I don't know if it was a plain pull or a locking latch.

I've been reading old posts for days and know most of the ins and outs of the boat thanks to this great forum.

[Phil T]

I am looking at the hull assembly Sheet # 1 and #2 as well as the parts list.

Is it the handle #44 on the 1998 Hull diagram OR #109 on the 1999 Hull assembly Sheet 1

OR

is it a square t lever style like in this photo:

outrage17iifloor.jpg (27.79 KiB) Viewed 3457 times

I find when looking for a whaler specific part, I go straight to Sue Lodel, Parts Manager at Twin Cities Marine. She is the gold standard.
http://www.beacontcm.com

[jimh]

I've been reading old posts for days and know most of the ins and outs of the boat thanks to this great forum.

When I created CONTINUOUSWAVE.COM, my goal was to collect and organize information, and to keep it on-line and easily available. I am pleased to hear that you found the information resources provided here to be useful. That has always been the primary goal: information, collected, organized, retained, and available for all.

[idylmoments]

Thank you Phil T. I was reading the picture wrong from the 1999 list. I thought #109 was the sea foam part that attached to the wall of the storage compartment. I ordered the latch handle from my dealer for $12. Whaler had 200 in stock.
And thank you for creating this page jimh.

[idylmoments]

Phil T I noticed something else that needs replacing thanks to the photo you posted. Looks like there are straps on the rear hatch covers in the pic. They are gone on my boat.

[idylmoments]

is it a square t lever style like in this photo:

Upon further inspection, I narrowed it down to a Perko 1082DP which I believe is what is shown in your pic.

Perko came today. Perfect fit. I went with the straight latch and it works.