!986 Outrage 18 Transom Hole Filling
Posted: Mon Aug 06, 2018 10:41 am
My boat had a Humminbird fish finder transducer wire installed via a 3/4 inch hole drilled through the transom a few inches above the water line. What is the recommended way to fill this permanently?
I replaced the transducer and put the wire over the transom instead of through it.
I thought of filling it with either epoxy or 3M 5200 or maybe filling it with a piece of dowel but leaving a space of say 1/4 inch inside and out of the transom and filling the 1/4 inch spaces with epoxy or 5200.
Thanks,
Don
I replaced the transducer and put the wire over the transom instead of through it.
I thought of filling it with either epoxy or 3M 5200 or maybe filling it with a piece of dowel but leaving a space of say 1/4 inch inside and out of the transom and filling the 1/4 inch spaces with epoxy or 5200.
Thanks,
Don