Hello guys—I re-powered my 1989 Revenge 22 W-T with twin Evinrude E-TEC 115-HP engines. The installer used plastic boards to cover the old instruments holes and installed the new instruments. It’s not so nice. I want to change that.
Where to find original black aluminium panels?
Thanks in advance.
Source for OEM-like Black Aluminum Helm Electrical and Instrument Panels
Source for OEM-like Black Aluminum Helm Electrical and Instrument Panels
- Attachments
-
- Helm station with new instruments mounted on ugly plastic boards
- C05BAA0F-49F8-40F1-9E5B-7FA788D48B9B.jpeg (131.37 KiB) Viewed 2415 times
Re: Source for OEM-like Black Aluminum Helm Electrical and Instrument Panels
I doubt you can find the trapezoidal instrument panel as an off-the-shelf part.
When I remodeled the instrument panel on my 1990 Revenge 22 W-T Whaler Drive boat, I fabricated my own new panels from aluminum sheet. I described the process in an article. See:
http://continuouswave.com/whaler/refere ... gging.html
You might be able to get a panel made from a vendor. For advice see:
http://continuouswave.com/whaler/refere ... helmPanels
When I remodeled the instrument panel on my 1990 Revenge 22 W-T Whaler Drive boat, I fabricated my own new panels from aluminum sheet. I described the process in an article. See:
http://continuouswave.com/whaler/refere ... gging.html
You might be able to get a panel made from a vendor. For advice see:
http://continuouswave.com/whaler/refere ... helmPanels
Re: Source for OEM-like Black Aluminum Helm Electrical and Instrument Panels
Hello Jim,
Thanks for your answers. I’ll try to find that kind of panels in Europe and shape them. I’ll post the result.
Kind regards
Jean-Do
Thanks for your answers. I’ll try to find that kind of panels in Europe and shape them. I’ll post the result.
Kind regards
Jean-Do