I plan to remove the bow rail on my 1989 OUTRAGE 22. I want to retain the option to re-install it in the future. To that effect I have been looking (unsuccessfully) to find a source of small stainless steel disks that would cover the circular areas where the bow rail attaches to the gunwale and has the holes for the three screws to be installed.
I know this could be made, but is there already a standard product?
Hello again everyone, and thanks.
-Ben
Circular Cover Plate with Three Holes to Match Railing Stanchion Base
-
- Posts: 8
- Joined: Wed Nov 13, 2019 10:15 pm
Re: Circular Cover Plate with Three Holes to Match Railing Stanchion Base
Ben -
All you need to do is remove the screws, remove the rail and then reinsert the screws with a dab of marine [url]sealant[/url], not adhesive on the top of the threads, under the head.
All you need to do is remove the screws, remove the rail and then reinsert the screws with a dab of marine [url]sealant[/url], not adhesive on the top of the threads, under the head.
1992 Outrage 17
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003