Revenge V-22 Cuddy Interior Molding

Repair or modification of Boston Whaler boats, their engines, trailers, and gear
rcapriola
Posts: 19
Joined: Mon Jul 15, 2019 8:26 pm
Location: Chico California

Revenge V-22 Cuddy Interior Molding

Postby rcapriola » Mon Oct 05, 2020 3:11 pm

I'm doing a minor remodel of my 1980 cuddy cabin interior. I've pulled all of the deteriorated head liner off, as well as the bulkhead that separates the anchor rode locker from the cabin. I plan on installing a reel-style on-deck windlass, so want to incorporate the old anchor rode space into the interior and need to find more of the trim that covers the joint that runs lengthwise around gunwale height. It's a somewhat flexible material that I think will bend all the way around the bow. Anyone recommend a source for this material to match the original BW molding?

Thanks in advance,
rob
1980 Revenge V-22 Sterndrive

User avatar
Phil T
Posts: 2602
Joined: Thu Oct 22, 2015 6:08 pm
Location: Was Maine. Temporarily Kentucky

Re: Revenge V-22 Cuddy Interior Molding

Postby Phil T » Mon Oct 05, 2020 3:58 pm

I would contact Sue Lodel, Parts Manager (and queen of parts) at Beacon Twin Cities Marine.

If anyone can find it or something wicked close, it would be her.

http://www.beacontcm.com
1992 Outrage 17
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003