2019 210 Montauk Freshwater Washdown Kit Installation

Repair or modification of Boston Whaler boats, their engines, trailers, and gear
outragesteve
Posts: 6
Joined: Mon May 16, 2016 2:46 pm

2019 210 Montauk Freshwater Washdown Kit Installation

Postby outragesteve » Wed Feb 03, 2021 2:45 pm

My neighbor has a 2019 210 Montauk and has purchased the freshwater [washdown] kit (complete) from [a Boston Whaler dealer].

Q1: in a factory-installation, where is the pump is mounted?

Q2: where is the filter mounted?

Q3: is cutting an access hole inside the console necessary to to install the fill and vent assembly?

[The neighbor's 2019 210 MONTAUK] boat has the saltwater washdown option, and the wiring and control switch are already in place. The connector for the freshwater pump is in the center service area below the splash well.

jimh
Posts: 11678
Joined: Fri Oct 09, 2015 12:25 pm
Location: Michigan, Lower Peninsula
Contact:

Re: 2019 210 Montauk Freshwater Washdown Kit Installation

Postby jimh » Wed Feb 03, 2021 2:55 pm

I suggest you suggest to your neighbor that he visit WHALER.COM and use the OWNER RESOURCES to look for the various ASSEMBLY DRAWINGS for the boat. Generally the assembly drawings will show the location of items like pumps and through-hull inlets or outlets associated with them. To find a dozen or more detailed drawings is common, so check through all of them.

outragesteve
Posts: 6
Joined: Mon May 16, 2016 2:46 pm

Re: 2019 210 Montauk Freshwater Washdown Kit Installation

Postby outragesteve » Wed Feb 03, 2021 3:35 pm

Thanks. The resource drawings do not show specifically where the pump and filter go. I will try Whaler customer service. They may direct me to my local dealer, which I will avoid.

User avatar
Phil T
Posts: 2602
Joined: Thu Oct 22, 2015 6:08 pm
Location: Was Maine. Temporarily Kentucky

Re: 2019 210 Montauk Freshwater Washdown Kit Installation

Postby Phil T » Wed Feb 03, 2021 5:12 pm

Whaler's owner resources library has a serious flaw. Not all the diagrams are available for all the model years. For example, to find a drawing for a 2019 Montauk 210 fresh water system, one needs to look at all the years prior to find if it is listed. In this case, the 2013 model year documents include drawings.

While I have spoken to Boston Whaler about this shortcoming and deficiency, there is little interest in rectifying it.

Steve - I am emailing you the PDF.
1992 Outrage 17
2019 E-TEC 90
2018 LoadRite 18280096VT
Member since 2003