Refinishing Mahogany Wood Parts
Posted: Tue Feb 13, 2024 5:11 am
[Based on advice from some unspecified article on the continuousWave website] I plan to refinish the neglected mahogany interior [of an unspecified year, model, and length of Boston Whaler boat] as follows:
[Moderator's note: when seeking advice about a particular Boston Whaler boat, please mention the model year of the Boston Whaler boat, the model designator of the Boston Whaler boat, and the length of the Boston Whaler boat. Providing readers with this information will help readers to provide you with better-informed information.
When citing information you have read on the continuousWave website, giving the URL to the article is also a good plan. ]
- apply epoxy
- apply varnish over the cured epoxy to provide protection against ultraviolet light
- sand with 220-grit abrasive,
- apply nine coats of varnish, and
- each year apply two more coats of varnish.
[Moderator's note: when seeking advice about a particular Boston Whaler boat, please mention the model year of the Boston Whaler boat, the model designator of the Boston Whaler boat, and the length of the Boston Whaler boat. Providing readers with this information will help readers to provide you with better-informed information.
When citing information you have read on the continuousWave website, giving the URL to the article is also a good plan. ]